It is currently Thu Jun 20, 2013 7:35 am

News News of General

Site map of General » Forum : General

NAS

Delete raid on TS-1679. (16 X 4TB).

Greetings all, I have purchased my second QNAP which is a TS-1679U with 16 4TB HDDs. I powered it up, logged in and let the wizard make me a raid 6 partition, thinking this would include all the drives to create one large 50 ish TB raid. It only used four of the drives out of the 16 and it will not allow me to expand it beyond the 16TB limit. SO, what is the ...
Read more : Delete raid on TS-1679. (16 X 4TB). | Views : 20 | Replies : 3 | Forum : System & Disk Volume Management


Raid 1 to 5 migration problem

I started with 2 x 1T disk in a working raid-1 set
Using the procedure I changed the drives one by one to 2T disks and expanded the capacity ending up with a 2T raid 1 set.

Next step was to add a 3rd 2T disk and migrate the raid 1 to raid 5 using the gui
The gui listed the new 2T so I could add it to the raid (it reported the migration ...
Read more : Raid 1 to 5 migration problem | Views : 12 | Replies : 1 | Forum : System & Disk Volume Management


RAID 5 on 859 broken

Hello!

859 hangs after Volume was full
After 1 day waiting - power off
After reboot - the raid is broken
please help
Serial Number Q103I00115

# mdadm -E /dev/md0
mdadm: No md superblock detected on /dev/md0.
# cat /etc/config/mdadm.conf
#

~] # cat /proc/mdstat
Personalities :
md8 : active raid1 sdh2(S) sdg2(S) sdf2(S) sde2(S) sdd2(S) sdc2(S) sdb2 sda2
530048 blocks

md13 ...
Read more : RAID 5 on 859 broken | Views : 69 | Replies : 6 | Forum : System & Disk Volume Management


from TS-410 and TS-269 PRO make a TS-469 PRO without LCD

Hello qnap brothers!

i have TS-410 (4 disk rack) with slow CPU and TS-269 PRO (2 disk rack) with super fast CPU.

Really upgrade TS-410 using mainboard from TS-269 PRO and make TS-469 PRO without LCD ?

What do you think?
Read more : from TS-410 and TS-269 PRO make a TS-469 PRO without LCD | Views : 45 | Replies : 2 | Forum : Miscellaneous


USBDisk2 problem

could someone help me understand the following pls.

Ts-221 / QTS 4.0.1

USBDisk 1 - front 2.0 USB slot on Qnap. Can access, transfer and also access the files through SSH Winscp under the folder USBDisk1

USBDisk 2 - rear 3.0 USB slot on Qnap. Can assess, transfer and everything fine except through SSH Winscp. The folder USBDisk 2 is empty. No files to be seen however I can see and access all files under ...
Read more : USBDisk2 problem | Views : 58 | Replies : 1 | Forum : Miscellaneous


Apache error during modification for Subversion

Dear folks,

i tried to install Subversion on my TS-659 Pro, but run midway into an undocumented error.

If you get the Error: Syntax error on line 17 of /etc/config/apache/extra/apache-svn.conf: Unkown Authn provider: external

Code: Select all
Shutting down Qthttpd services: Qthttpd.
Syntax error on line 17 of /etc/config/apache/extra/apache-svn.conf:
Unknown Authn provider: external
Apache httpd is stopped.
Starting Qthttpd services:Apache logs have been cleaned.


then you should just activat WebDav on the Webserver in the Qnap Userinteface. ...


Subverion inst. error during modification of apache server

Dear folks,

i tried to install Subversion on my TS-659 Pro, but run midway into an undocumented error.

If you get the Error: Syntax error on line 17 of /etc/config/apache/extra/apache-svn.conf: Unkown Authn provider: external

Code: Select all
Shutting down Qthttpd services: Qthttpd.
Syntax error on line 17 of /etc/config/apache/extra/apache-svn.conf:
Unknown Authn provider: external
Apache httpd is stopped.
Starting Qthttpd services:Apache logs have been cleaned.


then you should just activat WebDav on the Webserver in the Qnap Userinteface. ...
Read more : Subverion inst. error during modification of apache server | Views : 60 | Replies : 0 | Forum : Miscellaneous


Cant connect to my nas anymore

Guys,

I changed something just do not know what.
If I want to do with me Connect nas via Internet Explorer or via Finder I get the following message:

Not Found

The requested URL /index.html was not found on this server.

Apache Server at 192.168...... Port 8083

What I do see there is that the port 8080 is changed to 8083.
Can anyone tell me if I can change via telnet Putty?? Those port


Low transfer rate with TS-220

Hello everybody,

unfortunately my new TS-220 is quite slow with my PC (specs see below). The maximum transfer rate (read/write) is about 30 MB/s with windows copy as well as FTP (FileZilla).
With another Notebook (Core i3, 8GB, WIn 7 x64) the transfer rate is as expected (about 90 MB/s read, 60 MB/s write).
Does anyboy have an idea? Is the PC hardware limiting the transfer rate?

Thank you,
Batolo

Here are some hardware and ...
Read more : Low transfer rate with TS-220 | Views : 29 | Replies : 1 | Forum : File Sharing


QNAP Notification Hotmail

Hi,

I have a QNAP TS-410 ..

And would like to set up the notification alerts for Hotmail.

I have entered the required SMTP settings:

Server: smtp.live.com
Port: 587

And my username/password .. But when sending a test mail it doesn't work, But will work with a GMAIL server.

Could anyone advise ? I would ideally like to send from a hotmail account.

Cheers.
Read more : QNAP Notification Hotmail | Views : 118 | Replies : 4 | Forum : Miscellaneous


 

Login  •  Register


Statistics

Total posts 317955 • Total topics 60770 • Total members 135268