TS-509 Pro System Boot hangs

Discussion on setting up QNAP NAS products.
User avatar
Don
Guru
Posts: 12289
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York

Re: TS-509 Pro System Boot hangs

Post by Don »

You could try opening it up and reseating everything.
Use the forum search feature before posting.

Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
patbaker82
Getting the hang of things
Posts: 63
Joined: Fri Aug 21, 2009 6:54 am

Re: TS-509 Pro System Boot hangs

Post by patbaker82 »

Don wrote:You could try opening it up and reseating everything.
I've already been down that road :) - I think its a lost cause.
Post Reply

Return to “Turbo Station Installation & Setup”