UPS Compatibility Addition

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Post Reply
Fidden
New here
Posts: 4
Joined: Tue Nov 12, 2013 12:10 am

UPS Compatibility Addition

Post by Fidden »

Bought a CyberPower VALUE600EILCD Value Series Uninteruptible Power Supply (360W/600VA) recently, and this is confirmed as working with my TS-221 (running 4.1.2). As attached, UPS shows as detected by the NAS in External Devices, and shows 40 minutes run time. I simulated a power outage with a 15 minute shutdown on the NAS, and this was successful.

The TS-221 with 1 x 2TB Drive installed showed 8% load on the UPS with nothing else attached, fluctuating to 9% during startup and media library scanning. After 15 minutes of running on battery, the UPS still showed 40 minutes run time on the on-unit LCD.

Thought you'd like to know, so it can be added to the UPS list (the 800 is showing on there, but not this specific model).
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “Hardware & Software Compatibility”