BT Homehub/port forwarding
Posted: Sun Apr 15, 2012 6:02 pm
Hi guys,
I have done a bit of searching on the forum and have seen this mentioned a couple of times, but with no real resolution.
I have BT's Homehub 2a and am having real difficulties in setting up port forwarding. Well, the actual setting up is not the problem. I have manually set which ports to forward to the Nas (TS410). I had to forward to the IP as the HH does not actually show the NAS in the network map. When I am on my LAN, whether wirelessly or not, dont have any issues in accessing the NAS, but it's the remote functionality which I cant seem to get right.
I ran the network diagnostics and:
------ UPnP Diagnostics ------
List of UPNP devices found on the network :
desc: http://192.168.1.254:2555/upnp/UPnP_BTh ... 5/desc.xml
st: urn:schemas-upnp-org:device:InternetGatewayDevice:1
Found valid IGD : http://192.168.1.254:2555/upnp/UPnP_BTh ... PConn1.ctl
Local LAN ip address : 192.168.1.82
Connection Type : IP_Routed
Status : Connected, uptime=12444s, LastConnectionError : ERROR_NONE
Time started : Sun Apr 15 07:32:32 2012
MaxBitRateDown : 14335560 bps MaxBitRateUp 1163861 bps
ExternalIPAddress = xx.xxx.xxx.xxx (*edit: manually removed this for my security concerns)
Bytes: Sent: 20242209 Recv: 62855453
Packets: Sent: 81698 Recv: 76120
------ NAT PMP Diagnostics ------
initnatpmp() returned 0 (SUCCESS)
using gateway : 192.168.1.254
sendpublicaddressrequest returned 2 (SUCCESS)
readnatpmpresponseorretry returned -7 (FAILED)
Any ideas?
I am beginning to think the Home hub is not compatible....
thank you in advance!
I have done a bit of searching on the forum and have seen this mentioned a couple of times, but with no real resolution.
I have BT's Homehub 2a and am having real difficulties in setting up port forwarding. Well, the actual setting up is not the problem. I have manually set which ports to forward to the Nas (TS410). I had to forward to the IP as the HH does not actually show the NAS in the network map. When I am on my LAN, whether wirelessly or not, dont have any issues in accessing the NAS, but it's the remote functionality which I cant seem to get right.
I ran the network diagnostics and:
------ UPnP Diagnostics ------
List of UPNP devices found on the network :
desc: http://192.168.1.254:2555/upnp/UPnP_BTh ... 5/desc.xml
st: urn:schemas-upnp-org:device:InternetGatewayDevice:1
Found valid IGD : http://192.168.1.254:2555/upnp/UPnP_BTh ... PConn1.ctl
Local LAN ip address : 192.168.1.82
Connection Type : IP_Routed
Status : Connected, uptime=12444s, LastConnectionError : ERROR_NONE
Time started : Sun Apr 15 07:32:32 2012
MaxBitRateDown : 14335560 bps MaxBitRateUp 1163861 bps
ExternalIPAddress = xx.xxx.xxx.xxx (*edit: manually removed this for my security concerns)
Bytes: Sent: 20242209 Recv: 62855453
Packets: Sent: 81698 Recv: 76120
------ NAT PMP Diagnostics ------
initnatpmp() returned 0 (SUCCESS)
using gateway : 192.168.1.254
sendpublicaddressrequest returned 2 (SUCCESS)
readnatpmpresponseorretry returned -7 (FAILED)
Any ideas?
I am beginning to think the Home hub is not compatible....
thank you in advance!