WD40EFRX - LoadCycleCount issue is back?!
-
- Experience counts
- Posts: 1346
- Joined: Sun Aug 14, 2011 5:13 am
Re: WD40EFRX - LoadCycleCount issue is back?!
See here.
While there is a EXE file in this zip I am not sure if posting is allowed. Please moderators remove this file if it's not allowed.
John
While there is a EXE file in this zip I am not sure if posting is allowed. Please moderators remove this file if it's not allowed.
John
You do not have the required permissions to view the files attached to this post.
- TheRooster2000
- Easy as a breeze
- Posts: 379
- Joined: Tue Nov 11, 2008 2:12 am
- Location: Germany, NDS
Re: WD40EFRX - LoadCycleCount issue is back?!
Thanks for providing the latest version
Mediacenter => QNAP TVS-1282-i5-16G // 16GB RAM // QTS 4.5.4.2467 // 2x WD red SSD 1TB // RAID1 // 8x WD140EFFX red // RAID5
Backupcenter 01 => QNAP TS-869 Pro // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
Backupcenter 02 => QNAP TS-869L // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
Backupcenter 01 => QNAP TS-869 Pro // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
Backupcenter 02 => QNAP TS-869L // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
-
- Getting the hang of things
- Posts: 61
- Joined: Thu Mar 11, 2010 6:50 pm
- Location: Frankfurt - Germany
Re: WD40EFRX - LoadCycleCount issue is back?!
Oh my god,
took me 3 hours to get that freaking usb stick to boot freedos. Also had to rip apart all my drive in desktop. My drive was set to 8 sec, in the end i decided to go with idle timer 300 sec.
Thx wd for nothing, what a crap
took me 3 hours to get that freaking usb stick to boot freedos. Also had to rip apart all my drive in desktop. My drive was set to 8 sec, in the end i decided to go with idle timer 300 sec.
Thx wd for nothing, what a crap
-
- First post
- Posts: 1
- Joined: Mon Nov 18, 2013 9:19 pm
Re: WD40EFRX - LoadCycleCount issue is back?!
http://kranken.dyndns.org/~ast/WD-WCAZA1147904.png
My just retired WD20EARS had LCC of 3104887 after three years. No biggie. Still working fine.
My just retired WD20EARS had LCC of 3104887 after three years. No biggie. Still working fine.
-
- New here
- Posts: 6
- Joined: Tue Nov 19, 2013 10:41 pm
Re: WD40EFRX - LoadCycleCount issue is back?!
Hi All,
thanks for the WDIDLE 3 latest version!
So we have to set /D to disable completely OR /S300 to set to 5 munutes?
I don't understand IF Western Digital says that WE CAN use the WDIDLE on the new RED disks ??!!
(On the Caviar GREEN is not suggested to use the /D, disable completely, because possible error, my doubt is what command use!)
Another point are the SMART value on the NEW DISK:
MY SMART value are:
_____________________Actual___Worst___(Thresold__RAW)
01-Raw_read_error_rate__100_____253______ (51_____0)
03-Spin_up_time________100_____ 253______(21)
07-Seek_error_rate______100_____ 253______( 0_____0)
Other people with working disk without high LCC, instead of "100" as actual value, have "253"!!!!!!
What can you tell me about?
thanks for the WDIDLE 3 latest version!
So we have to set /D to disable completely OR /S300 to set to 5 munutes?
I don't understand IF Western Digital says that WE CAN use the WDIDLE on the new RED disks ??!!
(On the Caviar GREEN is not suggested to use the /D, disable completely, because possible error, my doubt is what command use!)
Another point are the SMART value on the NEW DISK:
MY SMART value are:
_____________________Actual___Worst___(Thresold__RAW)
01-Raw_read_error_rate__100_____253______ (51_____0)
03-Spin_up_time________100_____ 253______(21)
07-Seek_error_rate______100_____ 253______( 0_____0)
Other people with working disk without high LCC, instead of "100" as actual value, have "253"!!!!!!
What can you tell me about?
-
- Getting the hang of things
- Posts: 50
- Joined: Thu Apr 10, 2008 2:26 pm
Re: WD40EFRX - LoadCycleCount issue is back?!
must confirm LCC issue with 2 WD40EFRX's / Sept 2013, THDTheRooster2000 wrote: What I did now is to read out the idle timer value from one of my 3TB WD30EFRX Reds with WDIDLE3. I found out that the idle timer is disabled in those 3TB drives. Afterwards I prepared my 8 WD40EFRX Reds with WDIDLE3 and also disabled the idle timer there.
In the next few days I'll install the WD40EFRX Reds in my TS-869 Pro and I assume that they will work perfectly without the LCC issue.
Christian
- WD really ...
confirm as well - factory settings
WD30EFRX's idle disabled
WD40EFRX's idle 8secs
So I disabled idle time on my WD40EFRX's with wdidle3.
@Christian, thank you!
Cheers, boxida
Last edited by boxida on Tue Nov 26, 2013 6:06 am, edited 1 time in total.
TS-109Pro with Qraid1 - FW 3.1.0807T - 1 1 WD20EADS-00R6B0 - USB WD15EADS-00R6B0
Start 2008
TS-119 FW 3.7.3 - WD30EFRX - EXT4
TS-259Pro+ FW 3.7.3 - 2 WD40EFRX - EXT4 - Single Mode
Start 01.11.2010 18h/ 08.08.2012/ current 22.11.2013
SS-439 3.4.4 - 4 WD Scorpio blue 750GB, EXT4 Raid 5
Start 14.03.2012
Start 2008
TS-119 FW 3.7.3 - WD30EFRX - EXT4
TS-259Pro+ FW 3.7.3 - 2 WD40EFRX - EXT4 - Single Mode
Start 01.11.2010 18h/ 08.08.2012/ current 22.11.2013
SS-439 3.4.4 - 4 WD Scorpio blue 750GB, EXT4 Raid 5
Start 14.03.2012
-
- Getting the hang of things
- Posts: 50
- Joined: Thu Apr 10, 2008 2:26 pm
Re: WD40EFRX - LoadCycleCount issue is back?!
As said, I disabled idle timeboxida wrote: must confirm LCC issue with 2 WD40EFRX's / Sept 2013, THD
- WD really ...
confirm as well - factory settings
WD30EFRX's idle disabled
WD40EFRX's idle 8secs
So I disabled idle time on my WD40EFRX's with wdidle3.
but ....... disk 2 is still counting... in hour cylces.
and yes, wdidle3 1.05 and latest version used.
annoying! WD......
however,
HDD's are quiet, cool and accessible, Neither s/r/w errors nor recalibration counts.
TS-109Pro with Qraid1 - FW 3.1.0807T - 1 1 WD20EADS-00R6B0 - USB WD15EADS-00R6B0
Start 2008
TS-119 FW 3.7.3 - WD30EFRX - EXT4
TS-259Pro+ FW 3.7.3 - 2 WD40EFRX - EXT4 - Single Mode
Start 01.11.2010 18h/ 08.08.2012/ current 22.11.2013
SS-439 3.4.4 - 4 WD Scorpio blue 750GB, EXT4 Raid 5
Start 14.03.2012
Start 2008
TS-119 FW 3.7.3 - WD30EFRX - EXT4
TS-259Pro+ FW 3.7.3 - 2 WD40EFRX - EXT4 - Single Mode
Start 01.11.2010 18h/ 08.08.2012/ current 22.11.2013
SS-439 3.4.4 - 4 WD Scorpio blue 750GB, EXT4 Raid 5
Start 14.03.2012
-
- New here
- Posts: 3
- Joined: Tue Nov 26, 2013 7:13 am
Re: WD40EFRX - LoadCycleCount issue is back?!
Hi gents and lads,
Synology user here with 5x 4TB WD RED WD40EFRX drives.
Came across this post during my research.
Found this post very useful and just wanted to share with you my FreeDOS ISO containing latest WDIDLE3 2.0.0.1 only.
Package also contains unetbootin for Win and Mac - ver 5.85.
https://app.box.com/s/1kk3q18e2y7ee396ib2p
Regards,
Synology user here with 5x 4TB WD RED WD40EFRX drives.
Came across this post during my research.
Found this post very useful and just wanted to share with you my FreeDOS ISO containing latest WDIDLE3 2.0.0.1 only.
Package also contains unetbootin for Win and Mac - ver 5.85.
https://app.box.com/s/1kk3q18e2y7ee396ib2p
Regards,
-
- New here
- Posts: 3
- Joined: Tue Nov 26, 2013 7:13 am
Re: WD40EFRX - LoadCycleCount issue is back?!
Hi All,
I set myself to change my wdidle3 timer this morning. Took my drive off the NAS, plugged them into my PC and booted LiveDOS with wdidle3.. And found out all of my 5 x 4TB WD REDs (all of them the same model WD40EFRX-68WT0N0, same fw 80.00A80) have the timer disabled already.. First tried with WDIDLE3 2.0.0. Later on tried with WDIDLE3 1.05. Results exactly the same.. 'Idle3 Timer is disabled'..
Got me thinking and decided to verify this on my NAS itself (DS1513+) as it actually comes with WD idle3 tool built in already [for other Synology users popping in by this thread: script /usr/syno/etc/rc.d/S99WDidle3Dis.sh]
And it confirmed the timer is disabled.. Please see screenshots attached...
Based on the fact my drives have the timer disabled already but some users here have had their 4TB WD REDs with this timer set to 8 seconds - would this mean WD has actually disabled this perhaps on newer models.. Very interesting indeed..
I set myself to change my wdidle3 timer this morning. Took my drive off the NAS, plugged them into my PC and booted LiveDOS with wdidle3.. And found out all of my 5 x 4TB WD REDs (all of them the same model WD40EFRX-68WT0N0, same fw 80.00A80) have the timer disabled already.. First tried with WDIDLE3 2.0.0. Later on tried with WDIDLE3 1.05. Results exactly the same.. 'Idle3 Timer is disabled'..
Got me thinking and decided to verify this on my NAS itself (DS1513+) as it actually comes with WD idle3 tool built in already [for other Synology users popping in by this thread: script /usr/syno/etc/rc.d/S99WDidle3Dis.sh]
And it confirmed the timer is disabled.. Please see screenshots attached...
Based on the fact my drives have the timer disabled already but some users here have had their 4TB WD REDs with this timer set to 8 seconds - would this mean WD has actually disabled this perhaps on newer models.. Very interesting indeed..
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 6
- Joined: Tue Nov 19, 2013 10:41 pm
Re: WD40EFRX - LoadCycleCount issue is back?!
@dombera,
is really very very very strange!!!
I have the WD40EFRX-68WT0N0 firmware 80.00A80 production date 14 september 2013 and I have LCC problem!!!!!
Could you please tell us the production date of your disks??
and please, also the SMART ACTUAL and WORST value for: 01-Raw_read_error_rate,
03-Spin_up_time, 07-Seek_error_rate.
thanks!
is really very very very strange!!!
I have the WD40EFRX-68WT0N0 firmware 80.00A80 production date 14 september 2013 and I have LCC problem!!!!!
Could you please tell us the production date of your disks??
and please, also the SMART ACTUAL and WORST value for: 01-Raw_read_error_rate,
03-Spin_up_time, 07-Seek_error_rate.
thanks!
-
- New here
- Posts: 3
- Joined: Tue Nov 26, 2013 7:13 am
Re: WD40EFRX - LoadCycleCount issue is back?!
@fabiocasi
All 5 of my drives have the same production date: 9 September 2013.
Looks like your drives are few days younger
In regards to SMART data please have a look at the screenshot below. Please let me know if there is anything else I can do.
All 5 of my drives have the same production date: 9 September 2013.
Looks like your drives are few days younger
In regards to SMART data please have a look at the screenshot below. Please let me know if there is anything else I can do.
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 6
- Joined: Tue Nov 19, 2013 10:41 pm
Re: WD40EFRX - LoadCycleCount issue is back?!
Mine is NEWEST and hasn't timer disabled?!!!! HOW IS POSSIBLE ??? (Maybe production site??)
Other strange thing is the SMART "value" 100 instead of 253 of yours and other people.
http://imageshack.us/a/img35/2615/mrhi.jpg
Do you have experience in the smart value?? Do you thing is necessary to RMA the disk?
Other strange thing is the SMART "value" 100 instead of 253 of yours and other people.
http://imageshack.us/a/img35/2615/mrhi.jpg
Do you have experience in the smart value?? Do you thing is necessary to RMA the disk?
- doktornotor
- Ask me anything
- Posts: 7472
- Joined: Tue Apr 24, 2012 5:44 am
Re: WD40EFRX - LoadCycleCount issue is back?!
Why are you discussing this here instead of WD forums goes beyond me.
I'm gone from this forum till QNAP stop wasting volunteers' time. Get help from QNAP helpdesk instead.
Warning: offensive signature and materials damaging QNAP reputation follow:
QNAP's FW security issues
QNAP's hardware compatibility list madness
QNAP's new logo competition
Dear QNAP, kindly fire your clueless incompetent forum "admin" And while at it, don't forget the webmaster!
Warning: offensive signature and materials damaging QNAP reputation follow:
QNAP's FW security issues
QNAP's hardware compatibility list madness
QNAP's new logo competition
Dear QNAP, kindly fire your clueless incompetent forum "admin" And while at it, don't forget the webmaster!
- TheRooster2000
- Easy as a breeze
- Posts: 379
- Joined: Tue Nov 11, 2008 2:12 am
- Location: Germany, NDS
Re: WD40EFRX - LoadCycleCount issue is back?!
Hi all,
meanwhile I installed my 8 WD40EFRX in my TS-869 Pro. As I already described earlier in this thread I disabled the idle timer with wdidle3 -d prior to installation. This is the same setting as in my older WD30EFRX drives from last January.
Now the WD40EFRX drives are up and running for nearly 60 hours and I cannot see any issues with high LCC counts at all!
<Load_Cycle_Count> is at 7 after 60 hours, same value as for <Start_Stop_Count> and <Power_Cycle_Count>.
So no issues that I should be worried about!
meanwhile I installed my 8 WD40EFRX in my TS-869 Pro. As I already described earlier in this thread I disabled the idle timer with wdidle3 -d prior to installation. This is the same setting as in my older WD30EFRX drives from last January.
Now the WD40EFRX drives are up and running for nearly 60 hours and I cannot see any issues with high LCC counts at all!
<Load_Cycle_Count> is at 7 after 60 hours, same value as for <Start_Stop_Count> and <Power_Cycle_Count>.
So no issues that I should be worried about!
Mediacenter => QNAP TVS-1282-i5-16G // 16GB RAM // QTS 4.5.4.2467 // 2x WD red SSD 1TB // RAID1 // 8x WD140EFFX red // RAID5
Backupcenter 01 => QNAP TS-869 Pro // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
Backupcenter 02 => QNAP TS-869L // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
Backupcenter 01 => QNAP TS-869 Pro // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
Backupcenter 02 => QNAP TS-869L // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
-
- Getting the hang of things
- Posts: 50
- Joined: Thu Apr 10, 2008 2:26 pm
Re: WD40EFRX - LoadCycleCount issue is back?!
Hi TheRooster2000
Regards, boxida
I assume qnap's hdd standby function is turned off. Is it?TheRooster2000 wrote: <Load_Cycle_Count> is at 7 after 60 hours, same value as for <Start_Stop_Count> and <Power_Cycle_Count>.
Regards, boxida
TS-109Pro with Qraid1 - FW 3.1.0807T - 1 1 WD20EADS-00R6B0 - USB WD15EADS-00R6B0
Start 2008
TS-119 FW 3.7.3 - WD30EFRX - EXT4
TS-259Pro+ FW 3.7.3 - 2 WD40EFRX - EXT4 - Single Mode
Start 01.11.2010 18h/ 08.08.2012/ current 22.11.2013
SS-439 3.4.4 - 4 WD Scorpio blue 750GB, EXT4 Raid 5
Start 14.03.2012
Start 2008
TS-119 FW 3.7.3 - WD30EFRX - EXT4
TS-259Pro+ FW 3.7.3 - 2 WD40EFRX - EXT4 - Single Mode
Start 01.11.2010 18h/ 08.08.2012/ current 22.11.2013
SS-439 3.4.4 - 4 WD Scorpio blue 750GB, EXT4 Raid 5
Start 14.03.2012