I was wondering if anyone might be able to point me in the the direction to solve this issue I'm having.
I have a American Power Conversion (APC Back-UPS BX1500G) UPS. When I plug it in the QNAP (569Pro, Running 4.0.5) the QNAP detects it properly.
However on power down and restart the QNAP does not see the APC anymore, only until I unplug and plug the USB back in does it see the UPS again.
Is there a way to fix this, does anyone else have a similar experience?
Thanks
APC UPS not recognized/connected on restart
-
- Starting out
- Posts: 21
- Joined: Tue Dec 06, 2011 12:35 am
- TeeDub
- Getting the hang of things
- Posts: 97
- Joined: Fri Oct 11, 2013 7:48 am
Re: APC UPS not recognized/connected on restart
Hellordobosz wrote:I was wondering if anyone might be able to point me in the the direction to solve this issue I'm having.
I have a American Power Conversion (APC Back-UPS BX1500G) UPS. When I plug it in the QNAP (569Pro, Running 4.0.5) the QNAP detects it properly.
However on power down and restart the QNAP does not see the APC anymore, only until I unplug and plug the USB back in does it see the UPS again.
Is there a way to fix this, does anyone else have a similar experience?
Thanks
Did a search on the forum for "ups not recognized" and found this
http://forum.qnap.com/viewtopic.php?f=1 ... ed#p385708
Have a read
TW
TS-421
Version 4.0.2
4x3TB WD Reds RAID 5
Version 4.0.2
4x3TB WD Reds RAID 5
-
- Starting out
- Posts: 21
- Joined: Tue Dec 06, 2011 12:35 am
Re: APC UPS not recognized/connected on restart
Thanks for the reply id not see that, maybe i was searching for the wrong key words.
thanks again!
thanks again!