Hi all,
i am runnig a TS-669 Pro with FW 3.8.4 Build 20130816. I am considering about an Ugrade to QTS 4.1.0 Build 0612 but
i am not sure if my APC Back-UPS ES 550G (conneted via USB) is still supported QTS 4.1.
Under the current system OS 3.8.4 it works fine.
I tried borad search but didn't find anything about my UPS.
Can sombeody give any advice about this ?
Many Thanks.
Best regards
tlichy
APC Back-UPS ES 550G with TS-669 Pro
-
pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: APC Back-UPS ES 550G with TS-669 Pro
Have you reviewed the APC Models supported on the UPS Compatiblity List?tlichy wrote:Hi all,
i am runnig a TS-669 Pro with FW 3.8.4 Build 20130816. I am considering about an Ugrade to QTS 4.1.0 Build 0612 but
i am not sure if my APC Back-UPS ES 550G (conneted via USB) is still supported QTS 4.1.
Under the current system OS 3.8.4 it works fine.
I tried borad search but didn't find anything about my UPS.
Can sombeody give any advice about this ?
Many Thanks.
Best regards
tlichy
It shouldn't be a problem.
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.
-
przemek
- Starting out
- Posts: 26
- Joined: Tue Feb 11, 2014 5:35 pm
Re: APC Back-UPS ES 550G with TS-669 Pro
I am using this apc with 2 qnaps running qts 4.1, no problem
Wysłane z mojego iPhone przez Tapatalk
Wysłane z mojego iPhone przez Tapatalk
-
sWORDs
- Know my way around
- Posts: 153
- Joined: Wed Dec 15, 2010 3:17 am
- Location: The Netherlands
Re: APC Back-UPS ES 550G with TS-669 Pro
I'm also running it with two qnaps on 4.1, no issues, except for the UPS connected popping up once in a while.
TS-870 upgraded with i7 3770t and 16GB F3-1600C10D-16GSQ kit, replaced LAN-1G2T-D with Intel I350-T4.
6x 2TB Samsung HD203WI in RAID 5 with Samsung 480GB MZ7WD480HAGM-00003 as SSD Cache.
NAS firmware 4.2.0 Build 20150716.
6x 2TB Samsung HD203WI in RAID 5 with Samsung 480GB MZ7WD480HAGM-00003 as SSD Cache.
NAS firmware 4.2.0 Build 20150716.
-
tlichy
- New here
- Posts: 2
- Joined: Sun Nov 18, 2012 6:02 am
Re: APC Back-UPS ES 550G with TS-669 Pro
Hi all ,
MANY THANKS to you ALL for helpful answers
.
I will give it a try
.
Best regards
tlichy
MANY THANKS to you ALL for helpful answers
.I will give it a try
.Best regards
tlichy
-
JoeJoeJoe
- Easy as a breeze
- Posts: 326
- Joined: Fri Oct 08, 2010 10:54 am
Re: APC Back-UPS ES 550G with TS-669 Pro
The main problem that I see with QNAP's UPS implementation is the lack of:
"go into auto protection when only X minutes of power are left"
They have the :
"go into auto protection when the system has been on battery power for X minutes"
But, this does not cover the times that there is a power outage, after another power outage, after another power outage. With the time in between not long enough to recharge the batteries. This time of X might be too long and never be reached causing a hard power off by the UPS.
QNAP is the only system I have seen that uses this strange method.
"go into auto protection when only X minutes of power are left"
They have the :
"go into auto protection when the system has been on battery power for X minutes"
But, this does not cover the times that there is a power outage, after another power outage, after another power outage. With the time in between not long enough to recharge the batteries. This time of X might be too long and never be reached causing a hard power off by the UPS.
QNAP is the only system I have seen that uses this strange method.