Problems logging on to TS-421

[tastech7212]

Hi folks

Got a wierd thing happening. I can't login to my box using QThttpd, I get an "error establishing connection to database".

When I ssh in and run a df -h I get

[~] # df -h
Filesystem Size Used Available Use% Mounted on
/dev/ramdisk 32.9M 16.5M 16.5M 50% /
tmpfs 64.0M 356.0k 63.7M 1% /tmp
/dev/sda4 371.0M 333.9M 37.1M 90% /mnt/ext
/dev/md9 509.5M 131.1M 378.4M 26% /mnt/HDA_ROOT
/dev/md0 5.4T 1.0T 4.4T 19% /share/MD0_DATA
df: /share/external/Etron xHCI Host Controller: Protocol error
[~] # /etc/init.d/Qthttpd.sh start
df: /share/external/Etron xHCI Host Controller: Protocol error
Starting Qthttpd services: OK

SMB is working ok. Can someone please tell where to go from here?

Cheers

[schumaku]

Provide much more information.

I can't login to my box using QThttpd, I get an "error establishing connection to database".

What login are you talking of here? What URL is called? The service controlled by Qthttpd.sh is the NAS Web Server - permitting to serve your won Web content, or optionally grant access to the NAS shared folder data using the WebDAV protocol.

Regards,
-Kurt.

[tastech7212]

Sorry for the delay in replying. It's been a very busy 24hrs. Now back to the problem...

To clarify, I can't get to the web admin interface, I just get the database error.

I then ssled in and found the other controller error. I don't know if they are related or not.

[schumaku]

Can't get rid of the impression you try to connect to the NAS Web Server (port) - or a complete different system [IP address?] Web server where ie. WordPress or the like in place. There is no such message on QTS - and no database for the QTS desktop access required.

The other message is unrelated - and does not cause any issues.

[tastech7212]

Solved your are right. It's that long since I've used or accessed this box I didn't even think about that. Feel very dumb right now.

Thank you for your patience and assistance.