[HELP]Problem with Webserver

[LikWydd]

I'm having problems with my Webserver


When i connect to it through WAN it will work fine for a day or 2 but then i'll get a "Page Load Error" without changing any settings

I can still connect to the webserver through LAN on the same port and it works fine..

the traffic routing is fine on my router as i can connect to my QNAP administration using port :8080

any ideas?

Im using: V 3.0.0, build 0430T

[fribse]

What do you see in the apache log files?
Standard logfiles (if you haven't changed the location yourself) are located under /usr/local/apache/logs
And if you issue the

Code: Select all

/etc/init.d/Qthttpd.sh stop
/etc/init.d/Qthttpd.sh start

commands, do you see any errors or warnings?

[LikWydd]

the only errors i get is when i start the service..

"Could not determine the servers fully qualified domain name, using 192.168.1.3 for ServerName."

I realised when the webserver works and then stops and I change the port from the default of 80 and set it to something else it works again.

i stil cant see it being a routing issue as it does work for a while on port 80 then it will just stop workin without me changing anything..

Im not sure how to read the log files =(

[fribse]

Open the logfiles with WinSCP.
The warning is of no consequence.

[jm45]

I'm having problems with my Webserver
When i connect to it through WAN it will work fine for a day or 2 but then i'll get a "Page Load Error" without changing any settings

Hi,
maybe your firewall's router has (has not ?) the ability to block attacks from wan (flood, DoS,...), and hangs up ?

[LikWydd]

ok i have cleared the error logs and will check the next time this happens.. it hasnt happened for a day or 2..

I dont think I have NAT enabled on the router.. will have to check this out.

Just to clarify.. i used the webserver for 8 months on v2.1.4 without any problems and no settings change...

thats what makes me wonder is it something to do with v3..


I am also having this problem which i think is related to v3: http://forum.qnap.com/viewtopic.php?f=23&t=15535