Slightly annoying problem as of late...
When trying to access the Web Admin UI on my TS-112 - http://192.168.178.31:8080/cgi-bin/html ... .5.0.0816T, < Browser is Chrome > I get a message "The requested resource was not found on this server"
Strangely enough, everything works perfectly after 2-3 attempts !
This problem only occurred recently and prior to the new firmware being installed.
Any tips much appreciated.
Web Admin UI
- onlyalex
- Experience counts
- Posts: 1459
- Joined: Fri Nov 27, 2009 3:16 pm
- Location: Gothenburg Sweden
Re: Web Admin UI
Try clear the browsers cache
Create an favorite of the nas ip adress
http://192.168.178.31:8080
Do not include anything else after the port :8080
Connect again
Does problem still exist?
Create an favorite of the nas ip adress
http://192.168.178.31:8080
Do not include anything else after the port :8080
Connect again
Does problem still exist?
Nas1: Qnap TS-809 Pro "3.7.1 Build 0615"
Nas2: Qnap TS-119 "3.5.0 Build0816"
Nas3: Qnap TS-119P+ "3.5.0 Build0816"
Nas4: Qnap TS-212 "3.6.0 Build0210"
Nas5: Qnap TS-259 Pro+"3.5.0 Build 0815"
Nas6: Qnap TS-459 Pro II "3.5.0 Build 0815"
iPad2: 64Gig 3G "iOS 6"
UPS: APC Back-UPS RS 550VA
QNAP Comparison Cart HERE | 1Bay | 2Bay | 4Bay | 5Bay | 6Bay | 8Bay | 1U | 2U |
QNAP Compatibility List HERE | Online User Manual | Tutorials | Frequently Asked Questions |
Nas2: Qnap TS-119 "3.5.0 Build0816"
Nas3: Qnap TS-119P+ "3.5.0 Build0816"
Nas4: Qnap TS-212 "3.6.0 Build0210"
Nas5: Qnap TS-259 Pro+"3.5.0 Build 0815"
Nas6: Qnap TS-459 Pro II "3.5.0 Build 0815"
iPad2: 64Gig 3G "iOS 6"
UPS: APC Back-UPS RS 550VA
QNAP Comparison Cart HERE | 1Bay | 2Bay | 4Bay | 5Bay | 6Bay | 8Bay | 1U | 2U |
QNAP Compatibility List HERE | Online User Manual | Tutorials | Frequently Asked Questions |
- shenga
- Know my way around
- Posts: 176
- Joined: Sun May 29, 2011 7:38 pm
Re: Web Admin UI
Yes, I had cleared the browsers cache and nothing ..........
I did not get the chance to create the favorite as you suggested because in between the time of my post and you replying < which was unbelievably quick >, I noticed it was working fine with FF so I completely re-installed Chrome and that is also now working as it should.
I just didn't think at first it would be a browser issue and was convinced it was on the server side.
Once again onlyalex, appreciate your swift reply.
I did not get the chance to create the favorite as you suggested because in between the time of my post and you replying < which was unbelievably quick >, I noticed it was working fine with FF so I completely re-installed Chrome and that is also now working as it should.
I just didn't think at first it would be a browser issue and was convinced it was on the server side.
Once again onlyalex, appreciate your swift reply.
- shenga
- Know my way around
- Posts: 176
- Joined: Sun May 29, 2011 7:38 pm
Re: Web Admin UI
Damn, spoke too soon.
Its back again.
Tried what you suggested but no luck.
Strange, with FF no problem. Only with Chrome !
Its back again.
Tried what you suggested but no luck.
Strange, with FF no problem. Only with Chrome !
- shenga
- Know my way around
- Posts: 176
- Joined: Sun May 29, 2011 7:38 pm
Re: Web Admin UI
OK, think I've got it now.
The problem seems to be related to lastPass. As soon as I deleted all references there, works fine.
The problem seems to be related to lastPass. As soon as I deleted all references there, works fine.
- onlyalex
- Experience counts
- Posts: 1459
- Joined: Fri Nov 27, 2009 3:16 pm
- Location: Gothenburg Sweden
Re: Web Admin UI
What's lastPass ?
Nas1: Qnap TS-809 Pro "3.7.1 Build 0615"
Nas2: Qnap TS-119 "3.5.0 Build0816"
Nas3: Qnap TS-119P+ "3.5.0 Build0816"
Nas4: Qnap TS-212 "3.6.0 Build0210"
Nas5: Qnap TS-259 Pro+"3.5.0 Build 0815"
Nas6: Qnap TS-459 Pro II "3.5.0 Build 0815"
iPad2: 64Gig 3G "iOS 6"
UPS: APC Back-UPS RS 550VA
QNAP Comparison Cart HERE | 1Bay | 2Bay | 4Bay | 5Bay | 6Bay | 8Bay | 1U | 2U |
QNAP Compatibility List HERE | Online User Manual | Tutorials | Frequently Asked Questions |
Nas2: Qnap TS-119 "3.5.0 Build0816"
Nas3: Qnap TS-119P+ "3.5.0 Build0816"
Nas4: Qnap TS-212 "3.6.0 Build0210"
Nas5: Qnap TS-259 Pro+"3.5.0 Build 0815"
Nas6: Qnap TS-459 Pro II "3.5.0 Build 0815"
iPad2: 64Gig 3G "iOS 6"
UPS: APC Back-UPS RS 550VA
QNAP Comparison Cart HERE | 1Bay | 2Bay | 4Bay | 5Bay | 6Bay | 8Bay | 1U | 2U |
QNAP Compatibility List HERE | Online User Manual | Tutorials | Frequently Asked Questions |
- shenga
- Know my way around
- Posts: 176
- Joined: Sun May 29, 2011 7:38 pm
Re: Web Admin UI
An password app.
It seems as soon as the Web UI page loaded, lastpass was trying to autofill user name/password one step too early.
It seems as soon as the Web UI page loaded, lastpass was trying to autofill user name/password one step too early.