TS-212 firmware upgrade 4.01
-
- New here
- Posts: 2
- Joined: Tue Dec 22, 2009 5:51 am
TS-212 firmware upgrade 4.01
after the firmware upgrade, tha nas startups in normal mode. all seems ok. scanning ports gives the result of all the services activated, like web, smb and appltalk sharing, but there is a problem.
i can't connect to the nas neither via web for admin, neither via sharing.
in web admin page presents a blank page.
in sharing after the window with user and password admin, tells me that there is a problem.
anyone can help.
can i downdrade to 3.8.3?
thanks for the attention
i can't connect to the nas neither via web for admin, neither via sharing.
in web admin page presents a blank page.
in sharing after the window with user and password admin, tells me that there is a problem.
anyone can help.
can i downdrade to 3.8.3?
thanks for the attention
-
- Getting the hang of things
- Posts: 79
- Joined: Mon Jun 03, 2013 5:33 pm
Re: TS-212 firmware upgrade 4.01
HI,
do you try to clean your browsers catch?
do you try to clean your browsers catch?
-
- New here
- Posts: 5
- Joined: Thu Apr 11, 2013 5:38 pm
Re: TS-212 firmware upgrade 4.01
Hi. Same here.
I just upgraded from the Beta 4.00 version to the official 4.01 and now I can't access the NAS login remotely.
Everything else seems ok. I can access my web page but not the Login screen on port 8080. FTP works fine and I can access the login locally via ip address, it is just remotely. Also MYQNAPCLOUD is not working.
I tried a restart but that didn't work. Any suggestions?
Thanks.
I just upgraded from the Beta 4.00 version to the official 4.01 and now I can't access the NAS login remotely.
Everything else seems ok. I can access my web page but not the Login screen on port 8080. FTP works fine and I can access the login locally via ip address, it is just remotely. Also MYQNAPCLOUD is not working.
I tried a restart but that didn't work. Any suggestions?
Thanks.
-
- Getting the hang of things
- Posts: 79
- Joined: Mon Jun 03, 2013 5:33 pm
Re: TS-212 firmware upgrade 4.01
HI,
Could you try to clean browser catches and cookies,
If still cannot work after try it, please submit a support ticket for troubleshooting
http://www.qnap.com/en/index.php?lang=en&sn=4574
Could you try to clean browser catches and cookies,
If still cannot work after try it, please submit a support ticket for troubleshooting
http://www.qnap.com/en/index.php?lang=en&sn=4574
-
- New here
- Posts: 5
- Joined: Thu Apr 11, 2013 5:38 pm
Re: TS-212 firmware upgrade 4.01
Hi
I cleared the browser's cache and still not working. I am at work at the moment but I will test a bit more before I submit a support ticket just in case it's something I have missed.
I do use a DYNDNS but if I can use FTP ok and access the web page then this would suggest that this is working ok. It just seems not to like the secure http page for the logon but I haven't changed anything from the Beta 4.00 to the official 4.01 version. The upgrade is all that has happened including several re-starts.
I will do some more testing tonight and report back.
Thanks.
I cleared the browser's cache and still not working. I am at work at the moment but I will test a bit more before I submit a support ticket just in case it's something I have missed.
I do use a DYNDNS but if I can use FTP ok and access the web page then this would suggest that this is working ok. It just seems not to like the secure http page for the logon but I haven't changed anything from the Beta 4.00 to the official 4.01 version. The upgrade is all that has happened including several re-starts.
I will do some more testing tonight and report back.
Thanks.
- ContextSwitch
- Know my way around
- Posts: 197
- Joined: Mon Jan 16, 2012 5:09 pm
- Location: Darwen, UK
- Contact:
-
- New here
- Posts: 5
- Joined: Thu Apr 11, 2013 5:38 pm
Re: TS-212 firmware upgrade 4.01
Hi Geoff, thanks for your reply. Yes I did see that post, although similar not exactly the same issue. I can actually log on to the admin page locally. I just have an issue remotely and it doesn't even present me with a login user/password prompt.
I will however try and install the firmware again using QFINDER when I get home later.
Thanks.
I will however try and install the firmware again using QFINDER when I get home later.
Thanks.
-
- New here
- Posts: 5
- Joined: Thu Apr 11, 2013 5:38 pm
Re: TS-212 firmware upgrade 4.01
I have re-installed the 4.0.1 firmware and no change. When I logon locally via 192.168.1.107 I notice it redirects to 192.168.1.107:8080/cgi-bin/main.html?20130604
Has it changed from index.php to main.html ? Is this the issue ?
Has anybody got any idea before I submit a support ticket ?
Thanks.
Has it changed from index.php to main.html ? Is this the issue ?
Has anybody got any idea before I submit a support ticket ?
Thanks.
- pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: TS-212 firmware upgrade 4.01
If you aren't actually seeing the Login/Password window, then it probably isn't port forwarded properly in your Router. I'd recommend troubleshooting your Port-Forwarding in your Router, by verifying that port 8080/TCP is open. You can do this with the CanYouSeeMe.org - Open Port Check Toolpaulus1970 wrote:Hi Geoff, thanks for your reply. Yes I did see that post, although similar not exactly the same issue. I can actually log on to the admin page locally. I just have an issue remotely and it doesn't even present me with a login user/password prompt.
There is an incomplete listing of Port-Forwards listed at the bottom of QNAP Tutorial: Set up DDNS Service for Remote Internet Access to QNAP NAS
Some consumer grade Routers use 8080/TCP for their own internal Remote Management port, so you might need to change the port on the Router, and check to ensure that it is being forwarded properly to the NAS.
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.
-
- New here
- Posts: 5
- Joined: Thu Apr 11, 2013 5:38 pm
Re: TS-212 firmware upgrade 4.01
Hi Patrick. I actually worked it out myself in the end but still not sure why it used to work on both 3.8.1 and beta 4.0.0. I never had port 8080 open before and it worked fine. Is that because there was some re-direction going on behind the scene when accessing port 80 ?
Thanks for your help. Much appreciated.
Thanks for your help. Much appreciated.
- pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: TS-212 firmware upgrade 4.01
I'm glad you got it sorted out. Thanks for popping back to let us know that you were successful.paulus1970 wrote:Hi Patrick. I actually worked it out myself in the end but still not sure why it used to work on both 3.8.1 and beta 4.0.0. I never had port 8080 open before and it worked fine. Is that because there was some re-direction going on behind the scene when accessing port 80 ?
Thanks for your help. Much appreciated.
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.