XBMC Media Center
-
- Getting the hang of things
- Posts: 94
- Joined: Mon Aug 18, 2008 6:17 pm
- Location: England
Re: XBMC Media Center
I use this one on my living room PC. http://www.team-mediaportal.com/
Thanks for the heads up will try XBMC too.
Thanks for the heads up will try XBMC too.
QNAP TS-209PRO II with 3x 750GB Seagate (2 in RAID1 + 1 via USB)
MS Windows Guru, just getting into Linux
MS Windows Guru, just getting into Linux
-
- Starting out
- Posts: 10
- Joined: Thu Aug 28, 2008 2:42 am
Re: XBMC Media Center
XBMC?
Do you mean XBMS (XBMC Media Stream Protocol) support?
Do you mean XBMS (XBMC Media Stream Protocol) support?
-
- Starting out
- Posts: 22
- Joined: Thu Sep 11, 2008 8:28 pm
Re: XBMC Media Center
XBMS Will be GREAT!!!!
-
- New here
- Posts: 4
- Joined: Thu Oct 16, 2008 12:32 pm
Re: XBMC Media Center
There's no way you could run XBMC from the NAS.
It has no video card, the CPU isn't powerful enough to decode video (maybe low bitrate SD content, forget HD) and probably a hundred other different things.
It has no video card, the CPU isn't powerful enough to decode video (maybe low bitrate SD content, forget HD) and probably a hundred other different things.
-
- Starting out
- Posts: 11
- Joined: Wed Jun 17, 2009 10:31 pm
- Location: Skull castle
- Contact:
Re: XBMC Media Center
It mean XBMS protocol not XBM on NAS.
XBMS protocol is very reliable to tranfers multimedia files to a player.
XBMS protocol is very reliable to tranfers multimedia files to a player.
-
- Starting out
- Posts: 32
- Joined: Thu Jul 03, 2008 4:06 am
Re: XBMC Media Center
ipkg for TS509
Package: ccxstream
Version: 1.0.15-3
Section: net
Architecture: i686
Maintainer: NSLU2 Linux <nslu2-linux@yahoogroups.com>
MD5Sum: 439c300f22e92d41107397d1a0d25fd6
Size: 19506
Filename: ccxstream_1.0.15-3_i686.ipk
Source: http://easynews.dl.sf.net/sourceforge/x ... .15.tar.gz
Description: A server to stream music and video to an XBox running Xbox Media Player using XBMSP protocol
Package: ccxstream
Version: 1.0.15-3
Section: net
Architecture: i686
Maintainer: NSLU2 Linux <nslu2-linux@yahoogroups.com>
MD5Sum: 439c300f22e92d41107397d1a0d25fd6
Size: 19506
Filename: ccxstream_1.0.15-3_i686.ipk
Source: http://easynews.dl.sf.net/sourceforge/x ... .15.tar.gz
Description: A server to stream music and video to an XBox running Xbox Media Player using XBMSP protocol
-
- Starting out
- Posts: 25
- Joined: Thu Sep 03, 2009 12:43 pm
Re: XBMC Media Center
That link was down... anywhere else we can get it?
* I found it over here: http://sourceforge.net/projects/xbplaye ... 20Servers/
* I found it over here: http://sourceforge.net/projects/xbplaye ... 20Servers/
-
- Starting out
- Posts: 32
- Joined: Thu Jul 03, 2008 4:06 am
Re: XBMC Media Center
Here is valid link for ccxstream:
http://ipkg.nslu2-linux.org/feeds/optwa ... 3_i686.ipk
http://ipkg.nslu2-linux.org/feeds/optwa ... 3_i686.ipk
-
- Starting out
- Posts: 25
- Joined: Thu Sep 03, 2009 12:43 pm
Re: XBMC Media Center
For those that are interested, here is how I got my media streaming from my QNAP TS-509 to XBMC using xbmsp/ccxstream...
You need to first add Optware IPKG
1. First update your firmware to the latest build.
2. In your 'System Tools' -> 'QPKG' page, click on 'Get QPKG' button.
If nothing is listed you must get the package from the appropriate download page on the QNAP website.
3. Download 'Optware IPKG' package that matches your model.
4. Unzip the downloaded archive then install it (.qpkg file) via the 'System Update' under your 'System Tools' page.
After you reboot use PuTTY to ssh into your server. After logging in, change into the newly created optware directory. For me on the TS-509 it looked like this:
and issue the following commands...
You need to edit the startup script that should have been just created. You should be able to navigate to it by typing this:
And look for a file called "S75ccxstream" or something similar. If that location or file does not exist, try rebooting first.
Edit the startup script "S75ccxstream" with the built in text editor "VI" because some Windows text editors might corrupt the file.Inside the startup script is a section to point to your shared directory, modify that section.
Okay almost done.... The final thing to do is create or modify autorun.sh Follow the instructions HERE. Before you unmount the volume, we need to add a couple lines to autorun.sh Here is what mine looks like:
Then just restart your server and hopefully the ccxstream server will be running. You can check by typing
and look for something that says "ccxstream".
You need to first add Optware IPKG
1. First update your firmware to the latest build.
2. In your 'System Tools' -> 'QPKG' page, click on 'Get QPKG' button.
If nothing is listed you must get the package from the appropriate download page on the QNAP website.
3. Download 'Optware IPKG' package that matches your model.
4. Unzip the downloaded archive then install it (.qpkg file) via the 'System Update' under your 'System Tools' page.
After you reboot use PuTTY to ssh into your server. After logging in, change into the newly created optware directory. For me on the TS-509 it looked like this:
Code: Select all
cd /share/MD0_DATA/.qpkg/Optware
Code: Select all
ipkg update
ipkg install ccxstream
Code: Select all
cd /opt/etc/init.d
Edit the startup script "S75ccxstream" with the built in text editor "VI" because some Windows text editors might corrupt the file.
Code: Select all
vi S75ccxstream
#press "i" to go into edit mode
#press "escape" to exit edit mode
#then press ":" followed by "q" followed by "y" to save your changes
Okay almost done.... The final thing to do is create or modify autorun.sh Follow the instructions HERE. Before you unmount the volume, we need to add a couple lines to autorun.sh Here is what mine looks like:
Code: Select all
#!/bin/sh
# ccxstream server boot
rm -rf /opt
ln -sf /share/MD0_DATA/.qpkg/Optware /opt echo "export PATH=$PATH:/opt/bin:/opt:sbin" >> /root/.profile
ln -sf /share/MD0_DATA/.qpkg/Optware/etc/init.d/S75ccxstream /etc/rcS.d/QS999ccxstream
Code: Select all
ps -A
-
- Starting out
- Posts: 32
- Joined: Thu Jul 03, 2008 4:06 am
Re: XBMC Media Center
@micster:
Nice guide. Thank you for it.
I have same questions about testing of ccxstream...
I never tried it, because I use for streaming from QNAP NAS to XBMC nfs protocol (sometimes samba), and I don´t think that ccxstream is better.
But I don´t know...
- Which are max. transfer bitrates?
- Streaming full BD rips - is´t possible without problem?
- Is´t only for streaming to XBMC running on XBOX?
- What bring this protocol in compare with nfs and samba?
Please, can you describe more about ccxstream from your testing and real using?
Nice guide. Thank you for it.
I have same questions about testing of ccxstream...
I never tried it, because I use for streaming from QNAP NAS to XBMC nfs protocol (sometimes samba), and I don´t think that ccxstream is better.
But I don´t know...
- Which are max. transfer bitrates?
- Streaming full BD rips - is´t possible without problem?
- Is´t only for streaming to XBMC running on XBOX?
- What bring this protocol in compare with nfs and samba?
Please, can you describe more about ccxstream from your testing and real using?
-
- Starting out
- Posts: 25
- Joined: Thu Sep 03, 2009 12:43 pm
Re: XBMC Media Center
This is funny... I was looking for information on setting this up again because I couldn't remember how, and then I found my own post (haha).
Well to answer your question I'm not sure how well it performs which is what I'm going to set out to test again. Last year when I set this up I tried to stream from my media server here in Washington State to San Francisco. The computer running xbmc in San Francisco was able to map the drive and get access to my library of movies, but when trying to play it would buffer for a couple of minutes and then play only a few seconds totally unacceptable. Granted this was on a basic cable connection with around 1.0 mbps upstream. I'm planning on testing again and if I can't get decent results I'm going to up my Internet to something serious like 20 mbps and see what kind of results I get then. Stay tuned... hopefully.
Oh, and to "Why xbmsp?" because
I use dyndns.org and setup my router to forward all traffic on port 1400 to my Qnap TS-509. So the path to my media share on my client XBMC box (which is running on a PC) looks like: and automagically displays all my media that is shared on my TS-509.
Well to answer your question I'm not sure how well it performs which is what I'm going to set out to test again. Last year when I set this up I tried to stream from my media server here in Washington State to San Francisco. The computer running xbmc in San Francisco was able to map the drive and get access to my library of movies, but when trying to play it would buffer for a couple of minutes and then play only a few seconds totally unacceptable. Granted this was on a basic cable connection with around 1.0 mbps upstream. I'm planning on testing again and if I can't get decent results I'm going to up my Internet to something serious like 20 mbps and see what kind of results I get then. Stay tuned... hopefully.
Oh, and to "Why xbmsp?" because
- it was designed specifically for xbmc
- it has little overhead
- it is suppose to be the most bandwidth effecient
- it is a routable protocol which means you just need to open port 1400
Code: Select all
xbms://<IP path>
Code: Select all
xbms://mysubdomain.dyndns.org
-
- Starting out
- Posts: 25
- Joined: Thu Sep 03, 2009 12:43 pm
Re: XBMC Media Center
Sorry for the long delay. I never was able to get a valid test of this streaming protocol, but that is okay because now we have something better! It's called QMobile and it's an App from Qnap that gives you access to your media files right on your mobile device (iOS and Android)! Combine that with what I learned about Video Out Streaming and you really don't need to setup a special streaming protocol for XBMC so that you can access you movies across town.
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: XBMC Media Center
Hm but what about for say media streamer devices ?
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- Starting out
- Posts: 25
- Joined: Thu Sep 03, 2009 12:43 pm
Re: XBMC Media Center
I'm not sure what your asking, Moogle. When at home I have Micro-ATX HTPC that I built using the ZOTAC motherboard with XBMC installed. There is no substitute for XBMC as your main Media Extender, so if I was doing it now I would probably buy something like the ZOTAC MAG mini-pc and install the XBMC Linux Distro onto it.
However, when not at home.... it is not feasible that everywhere you go and want to watch your videos or listen to your music will have a PC with XBMC installed onto it. Yes, you could install XBMC onto a thumb-drive and take that with you (which is why I was researching streaming protocols), but it is a hassle and never quite works right. The QMobile app by itself will let you enjoy your media on-the-go, but with such tiny speakers and a little screen your mobile device (smart phone running iOS or Android) can't be shared with friends and family. That is why I bought some component cables for my iPhone so I can hook it up to any TV.
My iPhone becomes my media streaming device. It's compact, portable and always with me wherever I go. Throw the component cables in your bag and you're ready to rock you music and movies wherever you go with no hassle!
However, when not at home.... it is not feasible that everywhere you go and want to watch your videos or listen to your music will have a PC with XBMC installed onto it. Yes, you could install XBMC onto a thumb-drive and take that with you (which is why I was researching streaming protocols), but it is a hassle and never quite works right. The QMobile app by itself will let you enjoy your media on-the-go, but with such tiny speakers and a little screen your mobile device (smart phone running iOS or Android) can't be shared with friends and family. That is why I bought some component cables for my iPhone so I can hook it up to any TV.
My iPhone becomes my media streaming device. It's compact, portable and always with me wherever I go. Throw the component cables in your bag and you're ready to rock you music and movies wherever you go with no hassle!