I'm the proud owner of a 509 Turbo NAS with the latest firmware (2.1.1 Build 0122).
The box has 4 x 1,5 TB Seagate drives, setup as Raid 5 with encryption on it.
So far, no problem at all. Using the Webinterface I can open and mount the encrypted luks partition without any problems.
Now, for some reasons, I would like to add another key to unlock the encrypted partition.
As fas as I can say, the TS-509 uses a standard luks partiton for encryption.
Therefore also the "cryptsetup" command works. Using
Code: Select all
cryptsetup luksDump /dev/md0
BUT, the problem is that I can NOT use the passphrase, entered on the Web Interface to do anything to the encrypted partition!
I looks like that the passphrase is not used as entered in the Web Interface but altered in some way before used for encrypting the filesystem...
Example: When I try to manually open the encrypted partiton with the command
Code: Select all
cryptsetup luksOpen /dev/md0 /share/..
Code: Select all
No key available with this passphrase.
Command failed.
So far, I was not able to find out, what has be done to the passphrase entered in the Web GUI.
Maybe someone else out there, ran into the same thing???
Any suggestions?
Any help would be appreciated!
Thanks
Thanatos