Problems Initialising TS-431

Discussion on setting up QNAP NAS products.
bradshawce
Starting out
Posts: 10
Joined: Tue Jul 10, 2018 4:35 am

Re: Problems Initialising TS-431

Postby bradshawce » Fri Aug 10, 2018 6:57 am

Dump of the upgrade

Code: Select all

cksum=374281479
UBI device number 1, total 1728 LEBs (219414528 bytes, 209.2 MiB), available 1707 LEBs (216748032 bytes, 206.7 MiB), LEB size 126976 bytes (124.0 KiB)
Set volume size to 216748032
Volume ID 0, size 1707 LEBs (216748032 bytes, 206.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "tmp", alignment 1
Using 120-bit encryption - (QNAPNASVERSION4)
len=1048576
model name = TS-X31
version = 4.3.4
IS_STORAGE_V2
boot/
config/
fw_info
fw_info.conf
gl352x_fw.bin
gl352x_fw.eep
gl352x_update.sh
gl352x_util
libcrypto.so.1.0.0
libssl.so.1.0.0
rootfs2.ubi
rootfs2.ubi.cksum
uImage
uImage.cksum
update/
update_img.sh
4.3.4 20180710
MODEL NAME = TS-X31,new version = 4.3.4
limit version = 3.7.2
Allow upgrade
/bin/tar: rootfs2.ubi: Wrote only 4096 of 10240 bytes
/bin/tar: rootfs2.ubi.cksum: Cannot write: No space left on device
/bin/tar: uImage: Cannot write: No space left on device
/bin/tar: uImage.cksum: Cannot write: No space left on device
/bin/tar: update_img.sh: Cannot write: No space left on device
/bin/tar: Exiting with failure status due to previous errors
[Firmware Update] System update failed. Firmware failed to extract. Error code: FW006

User avatar
schumaku
Guru
Posts: 43557
Joined: Mon Jan 21, 2008 4:41 pm
Location: Kloten (Zurich), Switzerland -- Skype: schumaku
Contact:

Re: Problems Initialising TS-431

Postby schumaku » Fri Aug 10, 2018 6:12 pm

Suspect HDA_ROOT full or the like.

What shows

#mount
...
# df
...

bradshawce
Starting out
Posts: 10
Joined: Tue Jul 10, 2018 4:35 am

Re: Problems Initialising TS-431

Postby bradshawce » Tue Aug 14, 2018 6:26 am

mount shows:

Code: Select all

none on /new_root type tmpfs (rw,mode=0755,size=200M)
/proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
tmpfs on /tmp type tmpfs (rw,size=64M)
tmpfs on /dev/shm type tmpfs (rw)
tmpfs on /share type tmpfs (rw,size=16M)
none on /proc/bus/usb type usbfs (rw)
cgroup_root on /sys/fs/cgroup type tmpfs (rw)
/dev/sda on /share/external/DEV3301_0 type vfat (rw,utf8,dmask=0000,fmask=0111,shortname=mixed)
tmpfs on /tunnel_agent type tmpfs (rw,size=64m)


df shows

Code: Select all

Filesystem                Size      Used Available Use% Mounted on
none                    200.0M    165.8M     34.2M  83% /
devtmpfs                233.3M      8.0k    233.3M   0% /dev
tmpfs                    64.0M    220.0k     63.8M   0% /tmp
tmpfs                   239.6M      4.0k    239.6M   0% /dev/shm
tmpfs                    16.0M      1.1M     14.9M   7% /share
cgroup_root             239.6M         0    239.6M   0% /sys/fs/cgroup
/dev/sda                  1.9G    167.2M      1.7G   9% /share/external/DEV3301_0
tmpfs                    64.0M     36.0M     28.0M  56% /tunnel_agent


Return to “Turbo Station Installation & Setup”

Who is online

Users browsing this forum: No registered users and 1 guest