DNS Server Cannot Resolve Hosts

Discussion on setting up QNAP NAS products.
bitminer
Starting out
Posts: 36
Joined: Wed Sep 30, 2015 7:46 pm

Re: DNS Server Cannot Resolve Hosts

Post by bitminer » Mon Feb 11, 2019 10:51 am

I can't tell from this thread if you found the problem yet with your DNS server, but from below
Indycars wrote:
Tue Apr 18, 2017 10:34 pm

Lease Expires . . . . . . . . . . : Tuesday, April 18, 2017 5:36:46 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 234890380
DHCPv6 Client DUID. . . . . . . . : 00-01-xx-xx-xx-xx-xx-2D-00-24-8C-23-9B-0A
DNS Servers . . . . . . . . . . . : 192.168.1.1
Your Gateway is 192.169.1.1 and DNS server is 192.168.1.1 which is pointing to your gateway. I am guessing the DHCP server if miss-configured and should be set to 8.8.8.8 or whatever you Inet provider has for their DNS servers.

My guess is your router? is your Gateway and is running DHCP at 1.1 and does not actually do DNS lockups for that. Some machines may still work even with in correct setting until their DNS is flushed (Windows - best just flush windows and install linux :-) anywho )

iam@nas
Know my way around
Posts: 119
Joined: Wed Jun 15, 2016 2:49 am

Re: DNS Server Cannot Resolve Hosts

Post by iam@nas » Mon Feb 11, 2019 11:58 pm

'/etc/resolv.conf' with 'nameserver 127.0.1.1' is normal.
Configure your DNS servers in Control Panel > Network & File Services > Network Virtual Switch > Virtual Switch > Configure

Post Reply

Return to “Turbo Station Installation & Setup”