On boot, solid red HDD light(no inserted HDD) w/ No status light.

Discussion on setting up QNAP NAS products.
Post Reply
Lordwolfe
First post
Posts: 1
Joined: Thu Sep 17, 2015 9:29 am

Re: On boot, solid red HDD light(no inserted HDD) w/ No status light.

Post by Lordwolfe » Sat Jul 17, 2021 11:08 am

Vrman wrote:
Sat May 22, 2021 12:43 am
They offered me a 15% discount on a new unit.
QNAP did? was this from support or from a store/dealer?

rjesse
Starting out
Posts: 27
Joined: Tue Mar 08, 2016 4:19 am

Re: On boot, solid red HDD light(no inserted HDD) w/ No status light.

Post by rjesse » Wed Jul 21, 2021 2:09 am

IS QNAP Coming around? Response I got today;

"I talked to my supervisor, he said we were still waiting for the response from the upper management. And he also told me not every similar symptom was caused by this issue. We need to check the SN, production batch, motherboard version, and other info to determine. I'm still waiting for the reply and will update you later."

Sounds like we need to keep up the pressure...
Dual QNAP TS-251+

yeanchan
First post
Posts: 1
Joined: Tue Jul 27, 2021 8:58 pm

Re: On boot, solid red HDD light(no inserted HDD) w/ No status light.

Post by yeanchan » Tue Jul 27, 2021 9:10 pm

QNAP Model: TS251
Problem: System fan 1 failed and NAS was being rebooted repeatedly.
Solved: I used dupont jumper cable to connect a resistor between pin 1 and pin 8 (my board has only 9 pins) and the NAS booted successfully. However, my web UI login was messed up. Kept saying I didn't have the correct username or password (very sure I typed the right one) so I had to reset it. Finally be able to login and tt is now saying my drive has uncleaned data (probably caused by unexpected reboots multiple times) and currently rebuilding the RAID. This hack works!

Post Reply

Return to “Turbo Station Installation & Setup”