Invalid user or password.
[SOLVED] Help - No Hard drive detected AFTER firmware update
-
- Getting the hang of things
- Posts: 54
- Joined: Fri Apr 26, 2019 1:37 am
Re: [SOLVED] Help - No Hard drive detected AFTER firmware update
TS-873A RAID6
TS-653B RAID5
TS-653B RAID5
-
- Getting the hang of things
- Posts: 54
- Joined: Fri Apr 26, 2019 1:37 am
Re: [SOLVED] Help - No Hard drive detected AFTER firmware update
I inserted all 6 disks one by one with shutdowns and my NAS finally works again but is extremely slow and unreliable.
TS-873A RAID6
TS-653B RAID5
TS-653B RAID5
-
- New here
- Posts: 4
- Joined: Sat Mar 01, 2014 1:32 am
Re: [SOLVED] Help - No Hard drive detected AFTER firmware update
just a quick note had this happen to me yesterday on TS253Be unit going from firmware 4.x to 5.x. bricked to factory after update said no disks installed.
Did not have a monitor or anything but I did the fix to remove both disks, reboot NAS without it then shutdown and put first disk back in. It came up with volume degraded but data was there. Then shutdown and put second disk in. Came back up and started resync process...
scary for a moment and never seen this in years of qnap upgrades...
Did not have a monitor or anything but I did the fix to remove both disks, reboot NAS without it then shutdown and put first disk back in. It came up with volume degraded but data was there. Then shutdown and put second disk in. Came back up and started resync process...
scary for a moment and never seen this in years of qnap upgrades...