Hello to all
I`m sort of newbie to Qnaps and have 2 questions, if anyone can help with:
1) Is it ok when I remove all drives from NAS, and start it again: it resets and gives me to configure it from scratch (after I insert at least 1 drive) ?
2) I can not erase the drive in 4th bay... what ever drive I insert I have error:
Severity Level Date Time Users Source IP Application Category Content
Warning 2020/09/06 17:00:55 System 127.0.0.1 --- --- [Secure Erase] The last disk (Disk 4) of system RAID can not be erased.
Other 3 bays erase OK.... and all drives in every of 4 bays work ok and create volumes...raids... etc
Thanks in advance for help
TS-431 questions
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-431 questions
just erase all drive in an external device and start from scratch .. if that is what you would like to do
-
- New here
- Posts: 2
- Joined: Mon Sep 07, 2020 12:10 pm
Re: TS-431 questions
I did.... Just wanted to figure out if those are bugs or normal behaviour
-
- New here
- Posts: 2
- Joined: Sun Aug 23, 2020 2:39 am
Re: TS-431 questions
I believe the reason is (at least in RAID with redundancies) the data for the operating system is stored in at least 1 disk. So the last disk in the RAID cannot be erased, even if all the volumes and pools have been removed. What I did is rebuild a RAID 1 volume with another disk that has been erased so the operating system data is now on the other disk, and then proceed to erase this final disk. However synchronisation of the volume took a long time (with what should have been no data), so my concern was that 'deleted' data on the disk that hadn't been secure erased was copied back to the erased disk. So I had to go secure erase that disk again using an external enclosure. Maybe it didn't recopy the data, but I didn't want to take that risk.
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-431 questions
why post 'wisdom' in 2 year old threads?
marked for closure due to necroposting
marked for closure due to necroposting