[HOW-TO] A how to guide for ARM & Intel NAS servers

Discussion on setting up QNAP NAS products.
Locked
BaDu
First post
Posts: 1
Joined: Sat Jul 30, 2011 9:45 pm

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by BaDu » Fri Aug 05, 2011 4:28 pm

Excellent this guide solved my FTP troubles, THANKS

User avatar
Don
Guru
Posts: 11962
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York
Contact:

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by Don » Fri Aug 05, 2011 8:33 pm

You are welcome
Read the Online Manuals and use the forum search feature before posting.

It is a recommended to use RAID and have external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

Submit bugs and feature requests to QNAP via their Helpdesk app.

NAS: TVS-882BR | F/W: 4.3.6.0895 | 40GB | 2 x M.2 SATA RAID 1 (System/VMs) | 4 x M.2 NMVe QM2-4P-384A RAID 5 (Cache) | 5 x 4TB HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-663 | F/W: 4.3.6.0993 | 16GB | 2 x M.2 NMVe QM2-2P RAID 1 (Cache) | 4 x 4TB RAID 5
Apps: Boinc, Squid, DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS, Entware, DLstation, +others

private4587
New here
Posts: 9
Joined: Fri Jun 24, 2011 5:31 am

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by private4587 » Tue Oct 11, 2011 4:52 am

Don may I first off say whata great guide it is helping me a great deal. I have one question that I hope you can answer. On page 38 you mention that in port forwarding to pick an obtuse number for the outside and have that redirected say to 21 for FTP. Well that has thrown me, I have a BT Homehub 3 and in the section for port forwarding you place the port number and then there is a place for translate to. Is this where i place the correct port number on my NAS.
Again a great piece.

User avatar
Don
Guru
Posts: 11962
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York
Contact:

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by Don » Tue Oct 11, 2011 10:06 am

I don't know anyting about the BT Homehub 3 but it sounds like the translate to is the internal port address.
Read the Online Manuals and use the forum search feature before posting.

It is a recommended to use RAID and have external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

Submit bugs and feature requests to QNAP via their Helpdesk app.

NAS: TVS-882BR | F/W: 4.3.6.0895 | 40GB | 2 x M.2 SATA RAID 1 (System/VMs) | 4 x M.2 NMVe QM2-4P-384A RAID 5 (Cache) | 5 x 4TB HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-663 | F/W: 4.3.6.0993 | 16GB | 2 x M.2 NMVe QM2-2P RAID 1 (Cache) | 4 x 4TB RAID 5
Apps: Boinc, Squid, DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS, Entware, DLstation, +others

CAMS
New here
Posts: 2
Joined: Mon Oct 11, 2010 11:28 am

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by CAMS » Sat Oct 15, 2011 3:36 pm

.

fcroce
Starting out
Posts: 11
Joined: Mon Nov 22, 2010 12:23 am

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by fcroce » Wed Nov 16, 2011 12:50 pm

Thank you!

ampapa
Know my way around
Posts: 118
Joined: Sat Dec 03, 2011 7:47 am

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by ampapa » Tue Dec 13, 2011 4:07 am

Love the guide! keep up the great work.

A couple of questions if I may?

- What's the purpose of modding the profile for the session?

- I'm really to trying to get my head around the FTP portion of the NAS and am a bit concerned about the security. I'm currently running Ubuntu with proftp and am just curious what the difference is between it and the NAS? I though I read somewhere that the users on the NAS were somehow being broadcast in the open, is this true?

- Any changes made to the autorun.sh script are permenant even after reboot if I read your guide correctly, is that the case?

Thanks,

User avatar
Don
Guru
Posts: 11962
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York
Contact:

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by Don » Tue Dec 13, 2011 11:39 pm

ampapa wrote:Love the guide! keep up the great work.

A couple of questions if I may?

- What's the purpose of modding the profile for the session?

In case you want to add settings like variables that are not part of the profile supplied.

ampapa wrote:- I'm really to trying to get my head around the FTP portion of the NAS and am a bit concerned about the security. I'm currently running Ubuntu with proftp and am just curious what the difference is between it and the NAS? I though I read somewhere that the users on the NAS were somehow being broadcast in the open, is this true?

Broadcast in the open? Not sure what you mean in reference to FTP.

ampapa wrote:- Any changes made to the autorun.sh script are permenant even after reboot if I read your guide correctly, is that the case?

Yes

ampapa wrote:Thanks,
Read the Online Manuals and use the forum search feature before posting.

It is a recommended to use RAID and have external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

Submit bugs and feature requests to QNAP via their Helpdesk app.

NAS: TVS-882BR | F/W: 4.3.6.0895 | 40GB | 2 x M.2 SATA RAID 1 (System/VMs) | 4 x M.2 NMVe QM2-4P-384A RAID 5 (Cache) | 5 x 4TB HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-663 | F/W: 4.3.6.0993 | 16GB | 2 x M.2 NMVe QM2-2P RAID 1 (Cache) | 4 x 4TB RAID 5
Apps: Boinc, Squid, DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS, Entware, DLstation, +others

ampapa
Know my way around
Posts: 118
Joined: Sat Dec 03, 2011 7:47 am

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by ampapa » Wed Dec 14, 2011 2:15 am

Thanks for the reply Don.

I was referring to this link (viewtopic.php?p=179557) in which you had also commented about the users being broadcast... is there really a security issue there or is that mainly in the case of LDAP/AD integration? I'm not really sure how that information could be broadcast which is why I mentioned it.

I was following your suggestions in setting up my shares but find that I can't FTP into their shares for some reason, even as the admin. the best I've been able to do is FTP into the root directory where the default shares are setup, any thoughts as to wha tI might be doing wrong?

Thanks,

User avatar
Don
Guru
Posts: 11962
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York
Contact:

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by Don » Wed Dec 14, 2011 3:46 am

I don't see anything in there where I say users are broadcast.
Read the Online Manuals and use the forum search feature before posting.

It is a recommended to use RAID and have external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

Submit bugs and feature requests to QNAP via their Helpdesk app.

NAS: TVS-882BR | F/W: 4.3.6.0895 | 40GB | 2 x M.2 SATA RAID 1 (System/VMs) | 4 x M.2 NMVe QM2-4P-384A RAID 5 (Cache) | 5 x 4TB HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-663 | F/W: 4.3.6.0993 | 16GB | 2 x M.2 NMVe QM2-2P RAID 1 (Cache) | 4 x 4TB RAID 5
Apps: Boinc, Squid, DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS, Entware, DLstation, +others

ampapa
Know my way around
Posts: 118
Joined: Sat Dec 03, 2011 7:47 am

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by ampapa » Wed Dec 14, 2011 10:51 am

Didn't mean to imply/say that you had said it broadcasted just that someone else was making that point. I was just inquiring as to the validity of that question and thought you had some insight.

Thanks,

poseidon77
First post
Posts: 1
Joined: Sun Dec 25, 2011 2:23 pm

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by poseidon77 » Sun Dec 25, 2011 2:25 pm

Thanks for sharing

waninae39
Know my way around
Posts: 153
Joined: Mon Jun 09, 2008 11:32 am

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by waninae39 » Tue Jun 19, 2012 10:38 am

Excellent how to guide

keep up the good work
Current firmware version:
TS-670pro 4.3.3 6 x 3TB WB RED
TS-669pro 4.3.3 6 x 6TB WB RED
All are running etx4, and running Raid6.
The 669 has 6x 3tb WD red HD, the 439 has 4x 2TB WD black HD,

commercial hardware firewall and commercial router
VOIP hard and soft client with SIP digital and analog telco trunk
NAS & all clients: 1Gbit/s with dual trunk ports

mutterburra
Starting out
Posts: 20
Joined: Thu Jun 28, 2012 7:21 pm

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by mutterburra » Fri Jun 29, 2012 7:13 am

I can't mount that img file what do I need to open it.

User avatar
Don
Guru
Posts: 11962
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York
Contact:

Re: [HOW-TO] A how to guide for ARM & Intel NAS servers

Post by Don » Fri Jun 29, 2012 8:35 am

What IMG file?
Read the Online Manuals and use the forum search feature before posting.

It is a recommended to use RAID and have external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

Submit bugs and feature requests to QNAP via their Helpdesk app.

NAS: TVS-882BR | F/W: 4.3.6.0895 | 40GB | 2 x M.2 SATA RAID 1 (System/VMs) | 4 x M.2 NMVe QM2-4P-384A RAID 5 (Cache) | 5 x 4TB HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-663 | F/W: 4.3.6.0993 | 16GB | 2 x M.2 NMVe QM2-2P RAID 1 (Cache) | 4 x 4TB RAID 5
Apps: Boinc, Squid, DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS, Entware, DLstation, +others

Locked

Return to “Turbo Station Installation & Setup”