I was working in "virtualization station3" with a Centos 7 virtual machine. I have two ethernet ports connected between the NAS and my local router, in the "Network & Virtual Switch" I have-
- The Virtual switch 1 connected to the network adapter1 (local connection)
- The virtual switch 2 connected to the network adapter 2 (connection for virtual machines)
Before configuration:
- Network adapter1 IP: 192.168.0.100 (virtual switch 1 same ip)
- Network adapter2 IP: 192.168.0.50 (virtual switch 2 same ip)
- IP adapter1: No http, ssh, myqnapcloud, etc ping response inaccessible, 0 pacakage lost
- IP adapter2: No http, ssh, myqnapcloud, etc ping all pacakage lost
- My model TS-453A does not have a quickaccess port
- Qfinderpro finds the QNAP with the IP 192.168.0.50 in both adapters (currently no ping), I access in the configuration and the adapter 1 and 2 have the same configuration,with wrong gateway, my real gateway is 192.168.0.1, I tried change this, but after the confirmation, I access in configuration againg and the wrong configuration continuos the same
- I tried pressing the reset button for 3 seconds but after this nothing happens, everything continues the same (probably this option was not active in the qnap)
Does anyone have any other suggestions? Thanks