TS-453be
Did a firmware upgrade this morning. System rebooted but after about 30 minutes I was unable to access it. Drive lights are flashing as if working; however, the status light is RED and there is no LAN light. I hooked up a monitor directly to the NAS and it seems to be stuck on "Starting..." I did a power reset but ended up with the same results. I have a trouble ticket submitted with QNAP.
Locked up after Firmware Upgrade to 5.0.0.1716(20210701)
-
- New here
- Posts: 3
- Joined: Fri Feb 10, 2017 8:56 am
-
- New here
- Posts: 3
- Joined: Fri Feb 10, 2017 8:56 am
Re: Locked up after Firmware Upgrade to 5.0.0.1716(20210701)
I let the server run for about an hour and it eventually came back online. Must have been a drive issue it was correcting.
- Trexx
- Ask me anything
- Posts: 5388
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Locked up after Firmware Upgrade to 5.0.0.1716(20210701)
Could be usb external drive issue if you have any attached.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq