Locked up after Firmware Upgrade to 5.0.0.1716(20210701)

Discussion on setting up QNAP NAS products.
Post Reply
Scubapelli
New here
Posts: 3
Joined: Fri Feb 10, 2017 8:56 am

Locked up after Firmware Upgrade to 5.0.0.1716(20210701)

Post by Scubapelli »

TS-453be

Did a firmware upgrade this morning. System rebooted but after about 30 minutes I was unable to access it. Drive lights are flashing as if working; however, the status light is RED and there is no LAN light. I hooked up a monitor directly to the NAS and it seems to be stuck on "Starting..." I did a power reset but ended up with the same results. I have a trouble ticket submitted with QNAP.
Scubapelli
New here
Posts: 3
Joined: Fri Feb 10, 2017 8:56 am

Re: Locked up after Firmware Upgrade to 5.0.0.1716(20210701)

Post by Scubapelli »

I let the server run for about an hour and it eventually came back online. Must have been a drive issue it was correcting.
User avatar
Trexx
Ask me anything
Posts: 5393
Joined: Sat Oct 01, 2011 7:50 am
Location: Minnesota

Re: Locked up after Firmware Upgrade to 5.0.0.1716(20210701)

Post by Trexx »

Could be usb external drive issue if you have any attached.


Sent from my iPhone using Tapatalk
Paul

Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350

Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Post Reply

Return to “Turbo Station Installation & Setup”