Brand New TVS-x82T!

Interested in our products? Post your questions here. Let us answer before you buy.
User avatar
peelos
Easy as a breeze
Posts: 433
Joined: Sun Jun 26, 2016 9:28 pm

Re: Brand New TVS-x82T!

Post by peelos » Fri Oct 11, 2019 3:24 am

so.. coming up to 3.5years on since building my 1282, same for some of you guys..

How are they all fairing?

I have had:
  • 1 completely failed drive with the message "disk unplugged" - replaced under warranty and rebuilt RAID
  • 1 drive showed me ID 197 / ID 198 errors - replaced it and rebuilt RAID
  • 2 broken drive bays - the spring mechanism on the front has snapped due to cheap plastic (worrying as only ever removed two disks very carefully)
Any ideas where to get replacement drive bays? I will try support but would actually really prefer some more substantial metal bays if anyone has a source
NAS: TVS-1282-i7K-40G / 4 x 500GB SSD 2.5" / 2 x 500GB M.2 SSD / 8 x 4TB WD Red 3.5" / Corsair H5-SF Watercooling / 3 x 80mm PWM Noctua fans / Corsair 600W PSU / Asus Turbo GTX 1060 6GB GPU
Software: Plex Media Server / QTransmission / Sonarr / Radarr / Jackett / QMono / Tautulli / OpenHAB / Resilio Sync / QPython / QJDK 8 / NetData / Qapache / SortMyQPKGs
pfSense Firewall / OpenVPN Server: QOTOM Fanless Mini PC / Core i5 / 8GB RAM / 128GB SSD / 4 Gigabit NICs / AES-NI
Wireless Routers: 2 x Netgear AC1900 R7000 Nighthawk / Advanced Tomato Firmware

ray-lee
Starting out
Posts: 12
Joined: Sun Jan 29, 2017 11:49 am

Re: Brand New TVS-x82T!

Post by ray-lee » Sat Oct 12, 2019 12:24 am

I've had 1 failed drive and 2 drives flag up needing replacement but I think that was a bug as a scan of the drives came back healthy. rebooting the NAS would solve it. Still replaced the drives though and I'll eventually get round to checking them on a PC and using WD diagnostic software to see if they are indeed failed.

Had some issues on 4.3.x where mono would use a lot of RAM and get terminated. on 4.4.1 and it's not occured.

Had another issue that very few people seem to have had - i posted on the QNAP forum for it, so another individual firmware bug.

All in all, not bad. Need to swap out the CPU and other parts later this month or next.
TVS-682 | 16GB RAM | 4x 4TB WD RED

User avatar
rafale
Getting the hang of things
Posts: 98
Joined: Tue May 12, 2015 1:53 pm

Re: Brand New TVS-x82T!

Post by rafale » Sat Oct 12, 2019 1:23 am

Mine is still running strong. My mods for the delidded 6700K on the cooling was to use the same OEM design and upgraded the centrifugal fan and used a heavier, more copper based block 2U passive heatsink along with a higher capacity 450W corsair SFX PSU. My unit is full with drives.
I have had 3 broken drive bays which I replaced. It is indeed the plastic opening mechanism in the front which came apart. Temperature spikes in the mid 60s under heavy load and runs steady in the low 40s with 3 VMs and 1 container. This NAS is also my dual WAN router, NVR for 16 cameras, network controller and home automation controller.
With the number of VMs I had, I only wish it was an 8th gen Core i7 so I could have put 12 or 16 threads in it instead of the 8.
Last edited by rafale on Sat Oct 12, 2019 3:41 pm, edited 1 time in total.
TVS 1282, i7 6700K, Emulex OCe11102 dual 10GBe Card, 64GB, 2xMicron1100 2TB SATA, 2x Crucial C300 128GB Cache, 2x850 EVO 500GB M.2. 4x WD Red 8TB, 4x WD Purple 4TB

ray-lee
Starting out
Posts: 12
Joined: Sun Jan 29, 2017 11:49 am

Re: Brand New TVS-x82T!

Post by ray-lee » Sat Oct 12, 2019 11:56 am

32GB DIMM single sticks are now available. I wonder if the motherboard can support them. The webpage states 16GB max per slot but who knows.
TVS-682 | 16GB RAM | 4x 4TB WD RED

User avatar
peelos
Easy as a breeze
Posts: 433
Joined: Sun Jun 26, 2016 9:28 pm

Re: Brand New TVS-x82T!

Post by peelos » Sat Oct 12, 2019 2:21 pm

rafale wrote:Mine is still running strong. My mods for the deluded 6700K on the cooling was to use the same OEM design and upgraded the centrifugal fan and used a heavier, more copper based block 2U passive heatsink along with a higher capacity 450W corsair SFX PSU. My unit is full with drives.
I have had 3 broken drive bays which I replaced. It is indeed the plastic opening mechanism in the front which came apart. Temperature spikes in the mid 60s under heavy load and runs steady in the low 40s with 3 VMs and 1 container. This NAS is also my dual WAN router, NVR for 16 cameras, network controller and home automation controller.
With the number of VMs I had, I only wish it was an 8th gen Core i7 so I could have put 12 or 16 threads in it instead of the 8.
Would also be keen for at least a 7700 processor for x265 hardware decoding but no one has dared try flashing a bios from the newer units, will probably wait and buy another NAS further down the line.

Have you had better results with the replacement drive bays? The ones that shipped with the units clearly have a design fault..

NAS: TVS-1282-i7K-40G / 4 x 500GB SSD 2.5" / 2 x 500GB M.2 SSD / 8 x 4TB WD Red 3.5" / Corsair H5-SF Watercooling / 3 x 80mm PWM Noctua fans / Corsair 600W PSU / Asus Turbo GTX 1060 6GB GPU
Software: Plex Media Server / QTransmission / Sonarr / Radarr / Jackett / QMono / Tautulli / OpenHAB / Resilio Sync / QPython / QJDK 8 / NetData / Qapache / SortMyQPKGs
pfSense Firewall / OpenVPN Server: QOTOM Fanless Mini PC / Core i5 / 8GB RAM / 128GB SSD / 4 Gigabit NICs / AES-NI
Wireless Routers: 2 x Netgear AC1900 R7000 Nighthawk / Advanced Tomato Firmware

User avatar
rafale
Getting the hang of things
Posts: 98
Joined: Tue May 12, 2015 1:53 pm

Re: Brand New TVS-x82T!

Post by rafale » Sat Oct 12, 2019 3:45 pm

Well I put in drive bays which were brand new and never had to take them out. I am very careful with them now. Can't say that the new ones are any better in term of design. Lots of soft plastic...
I think the bios gets flashed with the firmware updates. If not, it probably would not have stopped me. I just don't think it is worth the trouble to go from a 6700K to a 7700K. I will wait a few more years. This is good enough as it is.
TVS 1282, i7 6700K, Emulex OCe11102 dual 10GBe Card, 64GB, 2xMicron1100 2TB SATA, 2x Crucial C300 128GB Cache, 2x850 EVO 500GB M.2. 4x WD Red 8TB, 4x WD Purple 4TB

okenny
Know my way around
Posts: 200
Joined: Tue Dec 29, 2015 6:19 am
Location: Germany

Re: Brand New TVS-x82T!

Post by okenny » Sat Oct 12, 2019 9:41 pm

also one broken drive bay.....no other issues :)

(will I see a drive failure tonight because I wrote this?)
QNAP TVS-1282-i7K-40G with Corsiar H5 SF watercooling, 3x 80mm PWM Noctua fans, 1x 60mm PWM Noctua fan, Corsair SF450 PSU

CiASpook
Know my way around
Posts: 202
Joined: Mon Mar 22, 2010 7:07 am

Re: Brand New TVS-x82T!

Post by CiASpook » Mon Oct 14, 2019 3:13 am

All this time and still no good "replacement" for the TVS-1282T3...
QNAP TVS-1282T3-i7-64G with 8x Seagate Ironwolf 14TB, 4x Samsung 860EVO 4TB, 2x Samsung 860EVO 2TB M.2, custom with Corsair H5 SF watercooling, Corsair SF450W PSU and Noctua NF-8A PWM 80mm fans. QTiering and RW Cache.

okenny
Know my way around
Posts: 200
Joined: Tue Dec 29, 2015 6:19 am
Location: Germany

Re: Brand New TVS-x82T!

Post by okenny » Mon Oct 14, 2019 3:24 am

CiASpook wrote:
Mon Oct 14, 2019 3:13 am
All this time and still no good "replacement" for the TVS-1282T3...
what else would you need from a NAS?
Other than a newer CPU, I'm not sure what else could be improved. I refer to the HW, the SW can always be improved.
QNAP TVS-1282-i7K-40G with Corsiar H5 SF watercooling, 3x 80mm PWM Noctua fans, 1x 60mm PWM Noctua fan, Corsair SF450 PSU

CiASpook
Know my way around
Posts: 202
Joined: Mon Mar 22, 2010 7:07 am

Re: Brand New TVS-x82T!

Post by CiASpook » Mon Oct 14, 2019 6:23 pm

okenny wrote:
Mon Oct 14, 2019 3:24 am
CiASpook wrote:
Mon Oct 14, 2019 3:13 am
All this time and still no good "replacement" for the TVS-1282T3...
what else would you need from a NAS?
Other than a newer CPU, I'm not sure what else could be improved. I refer to the HW, the SW can always be improved.
That's all I want. A HW CPU refresh. The formfactor and everything else is fine :) A 10th gen CPU would be nice, but a 9th gen would also be OK.
QNAP TVS-1282T3-i7-64G with 8x Seagate Ironwolf 14TB, 4x Samsung 860EVO 4TB, 2x Samsung 860EVO 2TB M.2, custom with Corsair H5 SF watercooling, Corsair SF450W PSU and Noctua NF-8A PWM 80mm fans. QTiering and RW Cache.

User avatar
rafale
Getting the hang of things
Posts: 98
Joined: Tue May 12, 2015 1:53 pm

Re: Brand New TVS-x82T!

Post by rafale » Wed Oct 16, 2019 12:40 am

CiASpook wrote:
Mon Oct 14, 2019 6:23 pm

That's all I want. A HW CPU refresh. The formfactor and everything else is fine :) A 10th gen CPU would be nice, but a 9th gen would also be OK.
Indeed, I was looking forward to something like this as well:
New CPU with more cores for VMs. Potentially NVME m.2 instead of sata slots so that the unit can boot in 1-2min instead of 10-15min. Maintain the form factor.
TVS 1282, i7 6700K, Emulex OCe11102 dual 10GBe Card, 64GB, 2xMicron1100 2TB SATA, 2x Crucial C300 128GB Cache, 2x850 EVO 500GB M.2. 4x WD Red 8TB, 4x WD Purple 4TB

doradekell214
First post
Posts: 1
Joined: Tue Mar 12, 2019 11:31 am

Re: Brand New TVS-x82T!

Post by doradekell214 » Wed Oct 16, 2019 1:16 am

Edit: discovered I would need the special 20 pin adapter. https://www.ebay.com/itm/Power-Supply-U ... 3030853128

I would like to upgrade the PSU to the SF 650 as well but was told the motherboard power plug was different on the QNAP motherboard. Can I just simply plug up the SF 650 in y TVS 882?
Last edited by doradekell214 on Wed Oct 16, 2019 9:40 am, edited 1 time in total.

okenny
Know my way around
Posts: 200
Joined: Tue Dec 29, 2015 6:19 am
Location: Germany

Re: Brand New TVS-x82T!

Post by okenny » Wed Oct 16, 2019 1:43 am

rafale wrote:
Wed Oct 16, 2019 12:40 am
Indeed, I was looking forward to something like this as well:
New CPU with more cores for VMs. Potentially NVME m.2 instead of sata slots so that the unit can boot in 1-2min instead of 10-15min. Maintain the form factor.
I don't think I'd pay ~2k+ for a new NAS just for those improvements. (CPU, NVME)
Though, I would very much like if the TVS-1282 was offered in a rackmount design, that might do it for me.
QNAP TVS-1282-i7K-40G with Corsiar H5 SF watercooling, 3x 80mm PWM Noctua fans, 1x 60mm PWM Noctua fan, Corsair SF450 PSU

occamsrazor
Know my way around
Posts: 209
Joined: Tue Mar 30, 2010 8:30 pm

Re: Brand New TVS-x82T!

Post by occamsrazor » Wed Oct 16, 2019 3:31 pm

Hi, can anyone confirm that the TVS-872XT power supply is dual voltage, i.e. if I had a US model I can just plug it straight in to European 220/240v (with a different plug/cable)?
Thanks
TS-451 [4 x 10TB WD Reds in Raid-5]
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones

dolbyman
Guru
Posts: 14823
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Brand New TVS-x82T!

Post by dolbyman » Wed Oct 16, 2019 9:46 pm

according to the specs page it is 100-240V

https://www.qnap.com/en/product/tvs-872 ... s/hardware

doesn't really fit in this x82T thread

Post Reply

Return to “Presales”