TVS-h1288x / TVS-h1688x

Interested in our products? Post your questions here. Let us answer before you buy.
Post Reply
User avatar
marcoi
Starting out
Posts: 11
Joined: Fri May 21, 2021 3:29 am

Re: TVS-h1288x / TVS-h1688x

Post by marcoi »

Per CPU specs, DDR4-2666 dual channel is the max supported. I dont think QNAP would put bios options to OC the memory?

https://www.intel.com/content/www/us/en ... tions.html

The only thing i can think of causing the slowing the memory down to 2400 vs 2666 would be if one of the memory were different specs. IE speeds slower on one, one being ECC vs Non ECC, Dual rank vs single rank, etc..

For my memory i replace the two stock ones with 4 identical memory units so they all matched.
Model name TVS-h1688X
CPU Intel(R) Xeon(R) W-1250 CPU @ 3.30GHz (6 cores, 12 threads)
Total memory 128 GB (126 GB usable)
cacakaka
New here
Posts: 8
Joined: Tue Aug 17, 2021 8:53 pm

Re: TVS-h1288x / TVS-h1688x

Post by cacakaka »

marcoi wrote: Wed Aug 18, 2021 9:42 pm My tvs-h1688x with 4 x kingston 32GB ram showing
Configured Clock Speed: 2667 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Memory Technology: DRAM
Thank you for your posting, its happy to know that the memory clock speed run at 2667 MT/s with four rams.
I test for different ram installations and show as follows.
All the rams are DDR4-3200 ECC UDIMM.
2 x 8GB original innodisk rams, 2667 MT/s;
2 x 16GB Micron 18ADF2G72AZ-3G2E1, 2667 MT/s;
2 x 32GB Micron 18ADF4G72AZ-3G2BZ, 2667 MT/s;
2 x 8GB original innodisk and 2 x 16GB Micron 18ADF2G72AZ-3G2E1, 2400MT/s;
2 x 16GB Micron 18ADF2G72AZ-3G2E1 and 2 x 32GB Micron 18ADF4G72AZ-3G2BZ, 2400MT/s;
2 x 8GB original innodisk and 2 x 32GB Micron 18ADF4G72AZ-3G2BZ, 2400 MT/s;

It seems that different types of memory run at a lower speed, even same manufacture or same frequency.
I would like to buy another 2 x 16GB or 2 x 32GB Micron rams and test again.
cacakaka
New here
Posts: 8
Joined: Tue Aug 17, 2021 8:53 pm

Re: TVS-h1288x / TVS-h1688x

Post by cacakaka »

cacakaka wrote: Tue Aug 17, 2021 9:27 pm I noticed that a new feature was added to support for Single Root I/O Virtualization (SR-IOV) since QuTS hero h4.5.2.1638 build 20210414.
But I can't find the feature or setting in TVS-h1288x.
I searched from www.qnap.com and found only 11 models that support SR-IOV, e.g. TS-h686/TS-h886.
(“https://www.qnap.com.cn/en-us/software/ ... on-station”)
I want to know when will TVS-h1288x supports SR-IOV.
May I replace the 10GbE Network Card to support SR-IOV.
Any one know about this?
User avatar
dolbyman
Guru
Posts: 35012
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: TVS-h1288x / TVS-h1688x

Post by dolbyman »

You would need to ask QNAP via ticket...QNAP does not come here..so nobody here will know
QNAPDanielFL
Easy as a breeze
Posts: 488
Joined: Fri Mar 31, 2017 7:09 am

Re: TVS-h1288x / TVS-h1688x

Post by QNAPDanielFL »

cacakaka wrote: Sun Aug 22, 2021 1:33 pm
cacakaka wrote: Tue Aug 17, 2021 9:27 pm I noticed that a new feature was added to support for Single Root I/O Virtualization (SR-IOV) since QuTS hero h4.5.2.1638 build 20210414.
But I can't find the feature or setting in TVS-h1288x.
I searched from www.qnap.com and found only 11 models that support SR-IOV, e.g. TS-h686/TS-h886.
(“https://www.qnap.com.cn/en-us/software/ ... on-station”)
I want to know when will TVS-h1288x supports SR-IOV.
May I replace the 10GbE Network Card to support SR-IOV.
Any one know about this?
I asked about this and was told that the TVS-h1288X can't support SR-IOV, because the CPU can't support this function.
SkyRE
Starting out
Posts: 38
Joined: Tue Apr 12, 2016 4:35 pm

Re: TVS-h1288x / TVS-h1688x

Post by SkyRE »

Hi Owners,
I'm curious in few questions:
  • is it Linux of FreeBSD inside?
  • what chipset used there? (dmidecode, lspci, lshw outputs if it's Linux, dmidecode, pciconf -lv outputs from FreeBSD)
Techthusiast
Starting out
Posts: 20
Joined: Thu Jun 11, 2020 1:50 pm

Re: TVS-h1288x / TVS-h1688x

Post by Techthusiast »

Hello all,

Regarding Single Root I/O Virtualization (SR-IOV) support on QNAP NAS, here is a tutorial that I found to be very helpful:
QuTS Hero v4.5.x: Viewing SR-IOV Device Settings


Hello QNAPDanielFL,

Regarding TVS-h1288X and SR-IOV, could I please ask you to re-check the accuracy of the information provided?
QNAPDanielFL wrote:I asked about this and was told that the TVS-h1288X can't support SR-IOV, because the CPU can't support this function.
The reason I ask is as follows:
  • The QNAP specifications for TVS-h1288X say it is equipped with an Intel Xeon W-1250 Workstation Processor.
  • The Intel Xeon W-1250 Workstation Processor specifications say it supports Intel Virtualization Technology for Directed I/O (VT-d).
  • Intel VT-d is the specific capability (IOMMU support) that SR-IOV requires from a CPU.
  • Altogether, these specifications seem to confirm that the QNAP TVS-h1288X's processor does indeed support SR-IOV.
Thus could I please ask you to double-check the following questions:
  1. Does the QNAP TVS-h1288X natively support SR-IOV ?
  2. If SR-IOV is not natively supported (when the TVS-h1288X is brand-new/out-of-the-box), can SR-IOV support be accomplished by installing an alternate NIC/ethernet adapter into PCIe Slot 2 or Slot 3 ?
    For example, the following QNAP 10GbE adapters both support SR-IOV: QNAP LAN-10G2T-X550 and
    QNAP QXG-10G2T-X710.
  3. Is there (by chance) any additional SR-IOV tutorial, datasheet, or white paper associated with any QNAP NAS or (QTS/QuTS Hero) Firmware, old or new, that might help to provide specific guidance?
Thank you for your assistance!


Best regards,
Techthusiast
QNAPDanielFL
Easy as a breeze
Posts: 488
Joined: Fri Mar 31, 2017 7:09 am

Re: TVS-h1288x / TVS-h1688x

Post by QNAPDanielFL »

I will ask again about this on Monday.
QNAPDanielFL
Easy as a breeze
Posts: 488
Joined: Fri Mar 31, 2017 7:09 am

Re: TVS-h1288x / TVS-h1688x

Post by QNAPDanielFL »

I asked again and the TVS-h1288X does not support SR-IOV.
I am sorry to say that I am not prepared to give a detailed answer for why this NAS does not support SR-IOV.
cacakaka
New here
Posts: 8
Joined: Tue Aug 17, 2021 8:53 pm

Re: TVS-h1288x / TVS-h1688x

Post by cacakaka »

QNAPDanielFL wrote: Wed Nov 17, 2021 1:01 am I asked again and the TVS-h1288X does not support SR-IOV.
I am sorry to say that I am not prepared to give a detailed answer for why this NAS does not support SR-IOV.
It's so sad to hear that for such an expensive NAS
User avatar
marcoi
Starting out
Posts: 11
Joined: Fri May 21, 2021 3:29 am

Re: TVS-h1288x / TVS-h1688x

Post by marcoi »

Anyone else having a lot of issues with their h1688? Im starting to regret buying this NAS. I have had two tickets open for weeks with nothing being resolved. I have two pools report they "status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected." The pools show cksum errors on the mirrored disks. I have two R1 setup for R10 pool.

The second issues has been HDP, which is a nice tool when it works. but it breaks every time it gets an app update so i am left with no protection for my VMs.

Anyways i want to see if i am only one dealing with this or if others who own the unit are having similar problems.

PS to check pool status you need to ssh into the box and run zpool status
Model name TVS-h1688X
CPU Intel(R) Xeon(R) W-1250 CPU @ 3.30GHz (6 cores, 12 threads)
Total memory 128 GB (126 GB usable)
purezerg
Getting the hang of things
Posts: 58
Joined: Wed Nov 18, 2009 7:41 pm

Re: TVS-h1288x / TVS-h1688x

Post by purezerg »

i can concur on the ram speeds. i just realized that I was running regular rams and not ECC.
I am running 2x16 and 2x32. now left wondering if i should get another 2x32gb kingston or swap all out for SK / samsung ecc 4x32gb

what's your comment on it?
silksilver99
New here
Posts: 5
Joined: Fri Nov 24, 2017 3:11 pm

Re: TVS-h1288x / TVS-h1688x

Post by silksilver99 »

I have upgraded TVS-h1288x with this RAM Kit and test and working successfully.
Timetec Hynix Original 32GB KIT (4x8GB) DDR4 3200MHz PC4-25600 Unbuffered ECC 1.2V CL22 1Rx8
https://www.amazon.com/dp/B09QF3M27N?re ... tails&th=1
User avatar
marcoi
Starting out
Posts: 11
Joined: Fri May 21, 2021 3:29 am

Re: TVS-h1288x / TVS-h1688x

Post by marcoi »

anyone try QuTS hero h5.0.1.2045 build 20220526 Public Beta yet? The last QuTS 5.0.0.x firmware put my unit into loop where it could not load correctly. when it did load up, it only lasted a few mins before it hung. I wish i never went to v5.x.x.x
Model name TVS-h1688X
CPU Intel(R) Xeon(R) W-1250 CPU @ 3.30GHz (6 cores, 12 threads)
Total memory 128 GB (126 GB usable)
casw1000
Getting the hang of things
Posts: 89
Joined: Sat Jan 30, 2016 8:46 pm

Re: TVS-h1288x / TVS-h1688x

Post by casw1000 »

I am running 5.0.0.1892, this has been fine and stable. To be honest, I have learnt to avoid beta's unless I have spare kit that I dont mind playing with. My 1288x provides a lot of my family with Plex and other services, therefore, I would not use beta software on this box. I must admit, that coming from the previous 4.x.x.x release, it takes a bit of geting used to, but then again, I found coming from none Hero OS > Hero a major difference as well. Not sure I can agree which is better TBH.
Post Reply

Return to “Presales”