Good morning.
I just ordered the TL-D800C expansion unit, which should arrive in a few days, and I don't know the product.
I need to connect it to the TS-431K NAS, and I'm asking if it is possible to program the power off and on as it is for the NAS.
I don't understand if the USB-connected expansion unit also follows the behavior of the NAS, or do I have to turn it off and on manually.
Thank you very much
TL-D800C possible to program the power supply?
- DMD61
- Starting out
- Posts: 48
- Joined: Wed Jun 30, 2021 10:16 pm
- Location: Italy
TL-D800C possible to program the power supply?
Storage Qnap Ts-431K +TL-D800C | UPS APC BX500MI
-
- Experience counts
- Posts: 2043
- Joined: Thu Mar 03, 2016 1:11 am
Re: TL-D800C possible to program the power supply?
Afaik: no.
But I do not use external stuff like this.
Regards
But I do not use external stuff like this.
Regards
A raid is never a substitute for backup! Never!
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
- DMD61
- Starting out
- Posts: 48
- Joined: Wed Jun 30, 2021 10:16 pm
- Location: Italy
Re: TL-D800C possible to program the power supply?
Instead just the shutdown, can it be controlled from the NAS panel?
Thanks
Thanks
Storage Qnap Ts-431K +TL-D800C | UPS APC BX500MI
- Gaudi
- Easy as a breeze
- Posts: 406
- Joined: Thu Mar 04, 2010 10:47 pm
TL-D800C possible to program the power supply?
I have asked for support on controlling an external smart power switch (Sonoff?) with scripts.
This could potentially apply to your case.
“Run script after HBS backup job completes”
viewtopic.php?t=167666
No replies yet.
This could potentially apply to your case.
“Run script after HBS backup job completes”
viewtopic.php?t=167666
No replies yet.