hi, I'm looking for a Usb to 2.5Gb ethernet adapter for the Qnap TS-269L?
thanks
2.5Gb network adapter for Qnap 269L
- dolbyman
- Guru
- Posts: 35023
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: 2.5Gb network adapter for Qnap 269L
Try a USB A adapter with AQC111U chipset, if that does not work, your NAS will not support the drivers/kernel needed for thi
It looks bleak though as this page
https://www.qnap.com/en/product/qna-uc5g1t
Names FW 4.3.6 as minimum and your NAS support ends at 4.3.4
It looks bleak though as this page
https://www.qnap.com/en/product/qna-uc5g1t
Names FW 4.3.6 as minimum and your NAS support ends at 4.3.4
-
- New here
- Posts: 2
- Joined: Wed Feb 08, 2023 8:18 am
Re: 2.5Gb network adapter for Qnap 269L
thanks for the advice, also What I'm trying to do is increase the speed between my computer and the NAS.
If the 2.5G adapter is not a viable option, maybe I can use 2 cables from the NAS to my 2.5G switch and activate the Port Trunking,
but I'm not sure what mode to use and I don't know if is going to work.
Any advice?
If the 2.5G adapter is not a viable option, maybe I can use 2 cables from the NAS to my 2.5G switch and activate the Port Trunking,
but I'm not sure what mode to use and I don't know if is going to work.
Any advice?
- dolbyman
- Guru
- Posts: 35023
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: 2.5Gb network adapter for Qnap 269L
SMB multichannel is not supported on your NAS and trunking only helps with Multiple clients...If you need more speed you might want to look at a new NAS