Brand New TVS-x82T!

Interested in our products? Post your questions here. Let us answer before you buy.
Post Reply
occamsrazor
Know my way around
Posts: 234
Joined: Tue Mar 30, 2010 8:30 pm

Re: Brand New TVS-x82T!

Post by occamsrazor » Wed Oct 16, 2019 9:55 pm

dolbyman wrote:
Wed Oct 16, 2019 9:46 pm
according to the specs page it is 100-240V

https://www.qnap.com/en/product/tvs-872 ... s/hardware

doesn't really fit in this x82T thread
Gosh, you're right... I had forgotten there was a TVS-x82T model, had misread it as TVS-x82XT. QNAP numbering is bewildering sometimes.... Sorry!
TS-451 [4 x 10TB WD Reds in Raid-5]
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones

ray-lee
Starting out
Posts: 14
Joined: Sun Jan 29, 2017 11:49 am

Re: Brand New TVS-x82T!

Post by ray-lee » Mon Dec 30, 2019 3:25 am

Been a while but just to update, I did do the CPU swap, install the Noctua cooler using 8mm standoffs (from RS components). What wasn't mentioned was that I need adequate screws - you'd think it's obvious but in my mind, I forgot about it and luckily had some spare screws from my new PC build.

I essentially copied Vassoura's setup including a 60mm fan on the rear but as an exhaust fan, and an 80mm fan over the M2 and RAM slots. Next time I open this up, I'll plan to replace it with a 120mm.

Oddly, when i upgraded the RAM, I bought some 32GB G.Skill AEGIS (2x 16GB Kit) which is working but my spare Kingston HyperX Fury (2x 8GB) is showing as 8GB (Unknown) but it is recognised. However the total is 47.04 GB usable rather than 48GB. It's working though and maybe a reboot will fix it. I'm planning on buying another AEGIS kit anyway as it was cheap (from Newegg).

Otherwise, it's been great. Temp's are in the mid-30's on idle. I have 5 docker containers running and 1 VM.

Big thanks to Vassoura.
TVS-682 | i7-6700k | 48GB RAM | 4x 4TB WD RED

User avatar
rgarjr
Know my way around
Posts: 158
Joined: Tue Aug 14, 2018 5:47 am
Location: Los Angeles County
Contact:

Re: Brand New TVS-x82T!

Post by rgarjr » Tue Dec 31, 2019 6:08 am

ray-lee wrote:
Mon Dec 30, 2019 3:25 am
Been a while but just to update, I did do the CPU swap, install the Noctua cooler using 8mm standoffs (from RS components). What wasn't mentioned was that I need adequate screws - you'd think it's obvious but in my mind, I forgot about it and luckily had some spare screws from my new PC build.

I essentially copied Vassoura's setup including a 60mm fan on the rear but as an exhaust fan, and an 80mm fan over the M2 and RAM slots. Next time I open this up, I'll plan to replace it with a 120mm.

Oddly, when i upgraded the RAM, I bought some 32GB G.Skill AEGIS (2x 16GB Kit) which is working but my spare Kingston HyperX Fury (2x 8GB) is showing as 8GB (Unknown) but it is recognised. However the total is 47.04 GB usable rather than 48GB. It's working though and maybe a reboot will fix it. I'm planning on buying another AEGIS kit anyway as it was cheap (from Newegg).

Otherwise, it's been great. Temp's are in the mid-30's on idle. I have 5 docker containers running and 1 VM.

Big thanks to Vassoura.
Any photos of your mods?

TS-1677x-1700 64GB Kingston HyperX 2666MHz | 4 x 860 EVO 500GB [RAID5] | Corsair SF600 | 3 x NF-A9 | NH-L12 with NF-A12x25 | 6 x NF-A6 | 4 x WD 10TB | QM2-4P-384 (4 x 1TB ADATA XPG SX8200 Pro M.2 [RAID5]) | Emulex Oce11102-NX
TVS-682-i7-6700K 64GB Kingston HyperX 2666MHz | 1 x 860 EVO 1TB | Corsair SF450 | 1 x NF-A8 | 4 x NF-A6 | NH-L12 with NF-A12x25| 1 x 250GB 860 EVO M.2 | Emulex Oce11102-NX
TVS-682-i7-7700 64GB Kingston HyperX 2666MHz | 1 x 860 EVO 1TB | Corsair SF450 | 1 x NF-A8 | 4 x NF-A6 | NH-L12 with NF-A12x25 | 1 x 250GB 860 EVO M.2 | Emulex Oce11102-NX
TVS-682-i7-7700 64GB Kingston HyperX 2666MHz | 1 x 860 EVO 1TB | Corsair SF450 | 1 x NF-A8 | 4 x NF-A6 | NH-L12 with NF-A12x25 | 1 x 2TB Seagate | 1 x 250GB 860 EVO M.2| Emulex Oce11102-NX

ray-lee
Starting out
Posts: 14
Joined: Sun Jan 29, 2017 11:49 am

Re: Brand New TVS-x82T!

Post by ray-lee » Tue Dec 31, 2019 3:14 pm

rgarjr wrote:
Tue Dec 31, 2019 6:08 am
Any photos of your mods?
I did but it looks just like Vassoura's first image on page 111 with the new heatsink.

I had some unrelated issues though as I had to power down for some electrical maintenance work in my building in that my docker containers with a bridged network lost their network connection to the virtual switch. Had to reset my qnap to get it back and recreate 1 container.
TVS-682 | i7-6700k | 48GB RAM | 4x 4TB WD RED

LennyM
Know my way around
Posts: 101
Joined: Thu Sep 19, 2013 5:43 pm

Re: Brand New TVS-x82T!

Post by LennyM » Wed Jan 01, 2020 8:28 pm

Hi,

I just read on another thread that apparently one of the two m.2 slots can handle NVME protocoll despite being advertised as SATA m.2.!

Can anybody verify that?

Best regards
Lenny

okenny
Know my way around
Posts: 216
Joined: Tue Dec 29, 2015 6:19 am
Location: Germany

Re: Brand New TVS-x82T!

Post by okenny » Tue Jan 07, 2020 2:56 am

LennyM wrote:
Wed Jan 01, 2020 8:28 pm
Hi,

I just read on another thread that apparently one of the two m.2 slots can handle NVME protocoll despite being advertised as SATA m.2.!

Can anybody verify that?

Best regards
Lenny
I very much doubt that
where did you read that?
QNAP TVS-1282-i7K-40G with Corsiar H5 SF watercooling, 3x 80mm PWM Noctua fans, 1x 60mm PWM Noctua fan, Corsair SF450 PSU

User avatar
rgarjr
Know my way around
Posts: 158
Joined: Tue Aug 14, 2018 5:47 am
Location: Los Angeles County
Contact:

Re: Brand New TVS-x82T!

Post by rgarjr » Tue Jan 07, 2020 7:56 am


TS-1677x-1700 64GB Kingston HyperX 2666MHz | 4 x 860 EVO 500GB [RAID5] | Corsair SF600 | 3 x NF-A9 | NH-L12 with NF-A12x25 | 6 x NF-A6 | 4 x WD 10TB | QM2-4P-384 (4 x 1TB ADATA XPG SX8200 Pro M.2 [RAID5]) | Emulex Oce11102-NX
TVS-682-i7-6700K 64GB Kingston HyperX 2666MHz | 1 x 860 EVO 1TB | Corsair SF450 | 1 x NF-A8 | 4 x NF-A6 | NH-L12 with NF-A12x25| 1 x 250GB 860 EVO M.2 | Emulex Oce11102-NX
TVS-682-i7-7700 64GB Kingston HyperX 2666MHz | 1 x 860 EVO 1TB | Corsair SF450 | 1 x NF-A8 | 4 x NF-A6 | NH-L12 with NF-A12x25 | 1 x 250GB 860 EVO M.2 | Emulex Oce11102-NX
TVS-682-i7-7700 64GB Kingston HyperX 2666MHz | 1 x 860 EVO 1TB | Corsair SF450 | 1 x NF-A8 | 4 x NF-A6 | NH-L12 with NF-A12x25 | 1 x 2TB Seagate | 1 x 250GB 860 EVO M.2| Emulex Oce11102-NX

okenny
Know my way around
Posts: 216
Joined: Tue Dec 29, 2015 6:19 am
Location: Germany

Re: Brand New TVS-x82T!

Post by okenny » Tue Jan 07, 2020 8:13 am

amazing, thanks

I wonder if all TVS-1282s can do that!
QNAP TVS-1282-i7K-40G with Corsiar H5 SF watercooling, 3x 80mm PWM Noctua fans, 1x 60mm PWM Noctua fan, Corsair SF450 PSU

vassoura
Getting the hang of things
Posts: 64
Joined: Mon Feb 20, 2017 3:04 am
Location: Porto, Portugal

Re: Brand New TVS-x82T!

Post by vassoura » Tue Feb 11, 2020 8:15 pm

ray-lee wrote:
Mon Dec 30, 2019 3:25 am
Been a while but just to update, I did do the CPU swap, install the Noctua cooler using 8mm standoffs (from RS components). What wasn't mentioned was that I need adequate screws - you'd think it's obvious but in my mind, I forgot about it and luckily had some spare screws from my new PC build.

I essentially copied Vassoura's setup including a 60mm fan on the rear but as an exhaust fan, and an 80mm fan over the M2 and RAM slots. Next time I open this up, I'll plan to replace it with a 120mm.

Oddly, when i upgraded the RAM, I bought some 32GB G.Skill AEGIS (2x 16GB Kit) which is working but my spare Kingston HyperX Fury (2x 8GB) is showing as 8GB (Unknown) but it is recognised. However the total is 47.04 GB usable rather than 48GB. It's working though and maybe a reboot will fix it. I'm planning on buying another AEGIS kit anyway as it was cheap (from Newegg).

Otherwise, it's been great. Temp's are in the mid-30's on idle. I have 5 docker containers running and 1 VM.

Big thanks to Vassoura.
That's what this forum is for, helping one another. In the past and before buying the unit, I also had other people's help so keep the questions coming!
TVS-682
- CPU: i7-6700K
- RAM: 32GB DDR4 Kingston HX434C19FRK2/32 (2x16GB 3466MHz@1.2v)
- COOLER: Noctua NH-L12 cooler
- FANS: 1x60mm NoiseBlocker fan, 1x60mm Noctua fan, 2x80mm Noctua fans, 1x92mm Noctua fan
- STORAGE: 2x500GB Crucial MX500 M.2 SSDs (RAID1 - VM duties), 2x500GB Samsung Evo 850 SSDs (RAID1 - Qtier), QM2-2P-344 with 2x500GB NVMe ADATA XPG SX8200 Pro M.2 (Caching), 4x3TB HDDs (RAID5 - Qtier)
- GPU: MSI GTX 1050 Ti LP
- PSU: SF450

User avatar
antik
Know my way around
Posts: 108
Joined: Mon May 18, 2015 2:51 pm

Re: Brand New TVS-x82T!

Post by antik » Mon Apr 13, 2020 4:14 pm

Based on new RTX cards added into the compatibility list: https://www.qnap.com/cs-cz/compatibilit ... ategory=25
I tested the card "INNO3D GEFORCE RTX 2060 SUPER TWIN X2 OC" in the NAS TVS-1282T3 for a few days, but unfortunately I can't recommend it at all :(

The fans on the graphics card are very, very noisy, and at 3D utilization, the cooling sound is at a volume equal to the engine of sport car, plus the fact is that the GPU temperature at 3D utilization keeping 83 degrees.
In addition, this card has a poorly set cooling process, in standard windows (2D) mode the fan is set so that it turns on and off every 2 seconds - the resulting sound is annoying for long time.
With app MSI Afterburner, you can address the problem of constant "turning on / off the fan in 2D in Windows" with setting fan rpm to 30% and set 60%-70% of fan rpm to reduce noise of high speed fan in 3D, but the card has 83 degrees even when cooling goes 100%.

So I returned my original Gigabyte GTX 1050 Ti back to the NAS :roll:
TVS-1282T3-i7-48G (450W) (fw: h) + 3x NF-A8 PWM + QXG-10G1T + INNO3D RTX 2060 SUPER TWIN X2 OC RGB + 2x 1TB ADATA SX8200PNP M.2 NVMe SSD (OS, apps, RAID1) + 4x 256GB Kingston SSD KC400 (VM's, RAID5) + 8x 10TB Seagate IronWolf Pro (RAID5).
TVS-871-16G (backup) (fw: 4.4.3.1354) + 8x 8TB Seagate IronWolf Pro (RAID5, backup and QVR Pro)
Network stuff: TP-Link Archer AX11000, QSW-804-4C, ASUS XG-U2008 and TP-Link TL-SG1008MP.

User avatar
antik
Know my way around
Posts: 108
Joined: Mon May 18, 2015 2:51 pm

Re: Brand New TVS-x82T!

Post by antik » Mon Apr 20, 2020 3:56 pm

I continued in testing RTX 2060 with TVS-1282T3, for example tried to lock 950mv with 1950MHz (or 900mv with 1890MHz) etc., but in the end I always reached the temperature of 83°C again.
Unfortunately the only thing that helped in the final was the "Vertical Sync" setting in the game and then I got an average temperature slightly below 70°C (and the fan speed is set to 40%).
This card is really hot af and fans on 100% rpm are very very very loud, so I'm happy to finally have an usable and quiet solution :wink:
TVS-1282T3-i7-48G (450W) (fw: h) + 3x NF-A8 PWM + QXG-10G1T + INNO3D RTX 2060 SUPER TWIN X2 OC RGB + 2x 1TB ADATA SX8200PNP M.2 NVMe SSD (OS, apps, RAID1) + 4x 256GB Kingston SSD KC400 (VM's, RAID5) + 8x 10TB Seagate IronWolf Pro (RAID5).
TVS-871-16G (backup) (fw: 4.4.3.1354) + 8x 8TB Seagate IronWolf Pro (RAID5, backup and QVR Pro)
Network stuff: TP-Link Archer AX11000, QSW-804-4C, ASUS XG-U2008 and TP-Link TL-SG1008MP.

okenny
Know my way around
Posts: 216
Joined: Tue Dec 29, 2015 6:19 am
Location: Germany

Re: Brand New TVS-x82T!

Post by okenny » Mon Apr 20, 2020 4:16 pm

antik wrote:
Mon Apr 13, 2020 4:14 pm
Based on new RTX cards added into the compatibility list: https://www.qnap.com/cs-cz/compatibilit ... ategory=25
I tested the card "INNO3D GEFORCE RTX 2060 SUPER TWIN X2 OC" in the NAS TVS-1282T3 for a few days, but unfortunately I can't recommend it at all :(
I am curious to know, what do you use the GPU for in your NAS?
QNAP TVS-1282-i7K-40G with Corsiar H5 SF watercooling, 3x 80mm PWM Noctua fans, 1x 60mm PWM Noctua fan, Corsair SF450 PSU

User avatar
antik
Know my way around
Posts: 108
Joined: Mon May 18, 2015 2:51 pm

Re: Brand New TVS-x82T!

Post by antik » Mon Apr 20, 2020 4:34 pm

Playing for example Diablo 3 or Black Mesa Half-Life etc. - I haven't big PC, only NAS TVS-1282T3 :wink:

By the way, my MSI Afterburner FAN setup:
RTX2060.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by antik on Mon Apr 20, 2020 4:46 pm, edited 1 time in total.
TVS-1282T3-i7-48G (450W) (fw: h) + 3x NF-A8 PWM + QXG-10G1T + INNO3D RTX 2060 SUPER TWIN X2 OC RGB + 2x 1TB ADATA SX8200PNP M.2 NVMe SSD (OS, apps, RAID1) + 4x 256GB Kingston SSD KC400 (VM's, RAID5) + 8x 10TB Seagate IronWolf Pro (RAID5).
TVS-871-16G (backup) (fw: 4.4.3.1354) + 8x 8TB Seagate IronWolf Pro (RAID5, backup and QVR Pro)
Network stuff: TP-Link Archer AX11000, QSW-804-4C, ASUS XG-U2008 and TP-Link TL-SG1008MP.

okenny
Know my way around
Posts: 216
Joined: Tue Dec 29, 2015 6:19 am
Location: Germany

Re: Brand New TVS-x82T!

Post by okenny » Mon Apr 20, 2020 4:45 pm

antik wrote:
Mon Apr 20, 2020 4:34 pm
Playing for example Diablo 3 or Black Mesa Half-Life etc. - I haven't big PC, only NAS TVS-1282T3 :wink:
So your nas is hooked up to a display, and you play that way? Do you use a VM?
QNAP TVS-1282-i7K-40G with Corsiar H5 SF watercooling, 3x 80mm PWM Noctua fans, 1x 60mm PWM Noctua fan, Corsair SF450 PSU

User avatar
antik
Know my way around
Posts: 108
Joined: Mon May 18, 2015 2:51 pm

Re: Brand New TVS-x82T!

Post by antik » Mon Apr 20, 2020 4:59 pm

Exactly.
VM.jpg
You do not have the required permissions to view the files attached to this post.
TVS-1282T3-i7-48G (450W) (fw: h) + 3x NF-A8 PWM + QXG-10G1T + INNO3D RTX 2060 SUPER TWIN X2 OC RGB + 2x 1TB ADATA SX8200PNP M.2 NVMe SSD (OS, apps, RAID1) + 4x 256GB Kingston SSD KC400 (VM's, RAID5) + 8x 10TB Seagate IronWolf Pro (RAID5).
TVS-871-16G (backup) (fw: 4.4.3.1354) + 8x 8TB Seagate IronWolf Pro (RAID5, backup and QVR Pro)
Network stuff: TP-Link Archer AX11000, QSW-804-4C, ASUS XG-U2008 and TP-Link TL-SG1008MP.

Post Reply

Return to “Presales”