OS install and apps
-
- New here
- Posts: 9
- Joined: Sun Jul 12, 2020 12:20 am
OS install and apps
Looking to get ts-453d, mostly for Plex media server, but also storage and other apps. Can/should the QTS operating system be installed on a m.2 nvme (with qm2)? Will this segregate media storage from operating system?
Separate question; I'm thinking that installing Plex media server on one HDD will keep it separate from the content, and allow rebuilding if something goes wrong.
Separate question; I'm thinking that installing Plex media server on one HDD will keep it separate from the content, and allow rebuilding if something goes wrong.
- dolbyman
- Guru
- Posts: 35032
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: OS install and apps
you can install OS/DB on nvme (never use a single SSD ..always two or more in Raid1+)
Could help Plex performance (navigation,etc) a bit..depending on how much media you hold
Could help Plex performance (navigation,etc) a bit..depending on how much media you hold
-
- New here
- Posts: 9
- Joined: Sun Jul 12, 2020 12:20 am
Re: OS install and apps
Thanks. That makes sense to RAID 1 the OS. Can I install on one of the drives in the bays, then later migrate it to an m.2, to free up the bay?
- dolbyman
- Guru
- Posts: 35032
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: OS install and apps
you would need to install the os from.scratch to move it ..so better wait till you have the components ready
-
- New here
- Posts: 9
- Joined: Sun Jul 12, 2020 12:20 am
Re: OS install and apps
It could be a year or more... I won't even be able to get a second 12tb drive for another 6 months
- dolbyman
- Guru
- Posts: 35032
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: OS install and apps
dont forget the backups..a mistake many regretted
lots of data needs lots of backups
lots of data needs lots of backups
-
- New here
- Posts: 9
- Joined: Sun Jul 12, 2020 12:20 am
Re: OS install and apps
Sorry. One more question/check. If I got the QM2-2S-220A, it can take 2 m.2 form factor SATA SSDs, correct? So I could get two Samsung 860 EVO SSD 500GB's, and run the OS and apps in RAID 1 on them, leaving the 4 bays of the TS-453D for solely storage?... Is that right?
- dolbyman
- Guru
- Posts: 35032
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: OS install and apps
that should work yes .. both adapter and disks are m2 SATA SSD's
-
- New here
- Posts: 9
- Joined: Sun Jul 12, 2020 12:20 am
Re: OS install and apps
Awesome. Thanks. I presume there really isn't much benefit of m.2 NVMe over SATA, for this type of implementation? I'm planning on probably 70% Plex, 20% other storage, and 10% retroarch gaming (NES and SNES only).
...and apparently I lied about the one more question...
...and apparently I lied about the one more question...
- dolbyman
- Guru
- Posts: 35032
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: OS install and apps
There is a big difference in interface speed, but the jump in IOPS even on SATA(over spinning disks), should be a big step up in therms of DB performance.
I have a plex server on 5 spinning WD (non Pro) Red disks (951X) and I don't have issues with any slow plex response *shrugs*
I have a plex server on 5 spinning WD (non Pro) Red disks (951X) and I don't have issues with any slow plex response *shrugs*
Last edited by dolbyman on Wed Jul 15, 2020 4:04 am, edited 1 time in total.
-
- New here
- Posts: 9
- Joined: Sun Jul 12, 2020 12:20 am
Re: OS install and apps
awesome. I was mainly going for making better use of the drive bays for storage, and any increase in performance would just be "gravy". Thank you so much!
-
- New here
- Posts: 9
- Joined: Sun Jul 12, 2020 12:20 am
Re: OS install and apps
How big of SSDs do you think I'll need? Is 500GB for each enough, or can I get away with 250? I want enough for QTS, and installed apps.
- dolbyman
- Guru
- Posts: 35032
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: OS install and apps
if you don't want to use it as an SSD storage volume, 250GB should be fine
-
- Getting the hang of things
- Posts: 54
- Joined: Mon Apr 28, 2008 2:44 am
Re: OS install and apps
I have pretty much the same idea, but would like to use the SSDs for both OS+Apps as well as caching.
As one should use RAID1 (and so there is only 1 SSD usable and the second one the mirror of the first), I wonder if it would work to use 1TB SSDs and split them into partitions like 250GB for OS+apps and 750GB for caching.
Is that supported?
As one should use RAID1 (and so there is only 1 SSD usable and the second one the mirror of the first), I wonder if it would work to use 1TB SSDs and split them into partitions like 250GB for OS+apps and 750GB for caching.
Is that supported?
- Device: TS-453D
- Firmware: 4.5.2.1566
- HDD: 4xWD-RED 3TB, configured as Raid 5 in a storage pool
- dolbyman
- Guru
- Posts: 35032
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: OS install and apps
there is no split usage on QNAP
any disk can only be one of those
-storage
-cache
-tier
no mix
any disk can only be one of those
-storage
-cache
-tier
no mix