Remove QTS SSL Certificate app in 4.3.2?

Discussion about various official QPKG software applications. Login required to view the contents.
User avatar
mikolajek
Getting the hang of things
Posts: 65
Joined: Wed Feb 25, 2009 6:45 pm
Location: Warsaw, Poland
Contact:

Remove QTS SSL Certificate app in 4.3.2?

Post by mikolajek »

I've been using 32-bit firmware for quite a while and always removed the QTS SSL Certificate app, since I'm not using QNAP commercial ceritifcates. When I upgrade to 4.3.2 beta I noticed that I can't remove it any longer - when clicking on the drop-down arrow of this app, nothing happens. Is this a bug or has this simply been limited in this firmware version?
tombulum
Know my way around
Posts: 159
Joined: Sat Jul 20, 2013 9:26 am
Location: Australia

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by tombulum »

I have seen this on my beta equipped NAS.
Can't explain why though.
Primary: QNAP TS-h1283XU-RP w/ 10 x Seagate EXOS 16TB in RAID-TP
FW QuTS Hero H5.0.0.1949 / 32 GB ECC RAM / Built-in 10 Gig network
Backup #1: Synology RS3617XS+ w/ 10 x Hitachi Ultrastar 10TB in RAID 6
FW DSM 7.0.1-42218 Update 3 1 / 8 GB ECC RAM / Built-in 10 Gig network
Backup #2: QNAP TVS-863 w/ 8 x Hitachi Deskstar 6TB in RAID 6
FW 5.0.0 / 8 GB RAM / LAN-10G2T-X550
Ternary: 2 x QNAP TS-879U-RP w/ 8 x WDC Red 4TB in RAID 6
FW 4.3.6 / 32 GB ECC RAM /
Ternary: QNAP TS-470 Pro w/ 4 x WDC Red 4TB in RAID 6
FW 4.3.6 / 16 GB ECC RAM /
Calmeraie
First post
Posts: 1
Joined: Wed Jan 27, 2016 10:47 pm

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by Calmeraie »

Hello,

I had the same problem.

You must connect to your NAS in SSh and enter the following command :

setcfg QcloudSSLCertificate Sys_App 0 -f /etc/config/qpkg.conf

Now you can remove the app.
User avatar
mikolajek
Getting the hang of things
Posts: 65
Joined: Wed Feb 25, 2009 6:45 pm
Location: Warsaw, Poland
Contact:

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by mikolajek »

Worked perfectly! Many thanks for this tip!
User avatar
whoisnader
Know my way around
Posts: 194
Joined: Wed Jul 08, 2009 1:18 pm

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by whoisnader »

Thanks for this. I had reverted back to 4.2 after testing 4.3.2 and the SSL app was nolonger compatible (as I had to upgraded the app when I installed the beta) compatible. I had to remove the new version using this to be able to install the older version.
QPeter
Starting out
Posts: 46
Joined: Sun Jul 26, 2009 6:01 am
Location: Tilburg, The Netherlands

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by QPeter »

Tip works for my NAS with QTS 4.3.3 build 136.
However, when I reboot it is back again.
Somehow it appears to be reinstalled.
QNAP TS-639pro RAID 6 WD2002FYPS's
QNAP TS-831xu RAID 5 4x 8TB 2x SSD
fantomas
Experience counts
Posts: 1560
Joined: Mon Feb 07, 2011 5:40 am
Location: Bratislava, Slovakia
Contact:

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by fantomas »

QPeter wrote:Tip works for my NAS with QTS 4.3.3 build 136.
However, when I reboot it is back again.
Somehow it appears to be reinstalled.
the same happened here
and after reboot, I can't remove it again.
Calmeraie wrote:Hello,
I had the same problem.

You must connect to your NAS in SSh and enter the following command :

setcfg QcloudSSLCertificate Sys_App 0 -f /etc/config/qpkg.conf

Now you can remove the app.
This works, but only until next boot when the application gets installed again...
experience with administration of UN*X (mostly linux) and applications on internet servers since 1994...
User avatar
aethling
Starting out
Posts: 13
Joined: Mon Nov 19, 2007 4:55 pm
Location: Devon, UK

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by aethling »

This situation is unacceptable!

QNAP - please let us remove this application! I do not accept you have the right to foist this on your users! WE HAVE PURCHASED THE BOX, IT IS NOT YOUR PLAYTHING.
User avatar
TheRooster2000
Easy as a breeze
Posts: 379
Joined: Tue Nov 11, 2008 2:12 am
Location: Germany, NDS

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by TheRooster2000 »

+1!
Mediacenter => QNAP TVS-1282-i5-16G // 16GB RAM // QTS 4.5.4.2467 // 2x WD red SSD 1TB // RAID1 // 8x WD140EFFX red // RAID5
Backupcenter 01 => QNAP TS-869 Pro // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
Backupcenter 02 => QNAP TS-869L // 3GB RAM // QTS 4.3.4.2451 // 8x WD80EFZX red // RAID5
janiszew
First post
Posts: 1
Joined: Sat Apr 11, 2015 6:05 am

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by janiszew »

QNAP, I want to remove QTS SSL Certificate app. This is unacceptable, that you foist this!
gustvd
First post
Posts: 1
Joined: Sat Jun 23, 2012 1:38 am

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by gustvd »

+1
danausGR
First post
Posts: 1
Joined: Sat May 27, 2017 9:13 pm

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by danausGR »

anyone from qnap to please kindly jump in?

I have the same request - be able to completely remove "QTS SSL Certificate".

Thanks,
danausGR
User avatar
dolbyman
Guru
Posts: 35276
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by dolbyman »

open a ticket with qnap ... they do not read here
User avatar
OneCD
Guru
Posts: 12156
Joined: Sun Aug 21, 2016 10:48 am
Location: "... there, behind that sofa!"

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by OneCD »

Microsoft wrote:Uninstalled in-box apps no longer automatically reinstall

Starting with Windows 10, version 1703, in-box apps that were uninstalled by the user won't automatically reinstall as part of the feature update installation process.
If even Microsoft (who are usually the last to do anything) are now doing this, why isn't QNAP? :roll:

ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage
vipowski
New here
Posts: 2
Joined: Sun Dec 11, 2016 4:14 pm

Re: Remove QTS SSL Certificate app in 4.3.2?

Post by vipowski »

+1
Post Reply

Return to “Official Apps”