Hi All,
I am running a TVS-471 with firmware version 4.2.4.
I am about to upgrade the firmware (to 4.3.3.0210) but before doing so it is recommended that I run the CF64 App to check the compatibility of the Apps that are installed on my NAS.
Installation of the CF64 App has gone smoothly, however when I run the App I see the message 'MYNAS refushed to connect'. I am operating behind a firewall and have my proxy settings set appropriately.
My expectation is that the CF64 App is using a non-standard port, and that my firewall is blocking this App.
Does anybody know which port this App is trying to communicate on?
Alternatively is there a list of known App issues?
Any help will be greatly appreciated.
Kind Regards,
Davo
Attempting to run CF64 App in order to determine potential firmware update issues?
-
- Starting out
- Posts: 38
- Joined: Wed Mar 22, 2017 6:49 am
-
- First post
- Posts: 1
- Joined: Tue Jun 17, 2014 11:46 pm
Re: Attempting to run CF64 App in order to determine potential firmware update issues?
Hi there,
same problem, same question with QNAP TS-221.
Any help appreciated, cheers
H.
same problem, same question with QNAP TS-221.
Any help appreciated, cheers
H.
-
- New here
- Posts: 5
- Joined: Fri Aug 11, 2017 12:50 am
Re: Attempting to run CF64 App in order to determine potential firmware update issues?
I just get blank window when I open up CF64 app.
PC: Intel i7 930 2.8 GHz, 12 GB RAM, 120 SSD HDD
NAS: TS-451+, 16 GB RAM, Firmware: 4.3.3.0262 build 20170727
Router: D-Link DIR-655
NAS: TS-451+, 16 GB RAM, Firmware: 4.3.3.0262 build 20170727
Router: D-Link DIR-655
-
- Starting out
- Posts: 38
- Joined: Wed Mar 22, 2017 6:49 am
Re: Attempting to run CF64 App in order to determine potential firmware update issues?
Bloody CF64 App; about as useful as tits on a bull! LOL
-
- Starting out
- Posts: 46
- Joined: Fri Nov 17, 2017 6:19 pm
Re: Attempting to run CF64 App in order to determine potential firmware update issues?
I'm running 4.3.3.0361 and I'm trying to run the CF64 app but I also have the white window.
Can anyone advise please ?. I don't want to apply the update without understanding what apps are impacted. I'm new to QNAP and I'm in the process of setting up my NAS.
Can anyone advise please ?. I don't want to apply the update without understanding what apps are impacted. I'm new to QNAP and I'm in the process of setting up my NAS.
===========================
System: QNAP TS-453A (8GB)
Drive config: 12TB (4 x 3TB WD RED) - RAID 5
Backup: Seagate 8 TB Backup Plus Hub (3.5" external, USB 3.0)
UPS: APC Back-UPS BX - 700VA, BX700U-GR (AVR, 4 Schuko outputs, USB)
System: QNAP TS-453A (8GB)
Drive config: 12TB (4 x 3TB WD RED) - RAID 5
Backup: Seagate 8 TB Backup Plus Hub (3.5" external, USB 3.0)
UPS: APC Back-UPS BX - 700VA, BX700U-GR (AVR, 4 Schuko outputs, USB)
- Trexx
- Ask me anything
- Posts: 5388
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Attempting to run CF64 App in order to determine potential firmware update issues?
You needed to run the app BEFORE you upgraded to 4.3.x.
Since you are already on 4.3.x release, there is no need to run the app. Upgrade to the latest QTS release via normal mechanisms.
Sent from my iPhone using Tapatalk
Since you are already on 4.3.x release, there is no need to run the app. Upgrade to the latest QTS release via normal mechanisms.
Sent from my iPhone using Tapatalk
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- Starting out
- Posts: 38
- Joined: Mon Jan 10, 2011 5:12 am
Re: Attempting to run CF64 App in order to determine potential firmware update issues?
I got the white/blank window before upgrading, after restarting before upgrading, etc... never got it work.