GoodSync QNAP Installation
-
- Starting out
- Posts: 16
- Joined: Tue Feb 07, 2012 10:50 pm
Re: GoodSync QNAP Installation
Just to warn people:
I was running successfully on 10.6.7.1
Saw a newer version 10.6.7.3 so went to install that. Stopped the service and then manually installed the newer version.
It failed.
Had to go into CLI and manually kill processes. Eventually it installed and restarted.
All previous setting lost. Users etc etc.
Backed up data *survived* but had to start again with all configuration.
This should be considered ALPHA software until it gets used a bit more - especially as its is meant for BACKUP!
I was running successfully on 10.6.7.1
Saw a newer version 10.6.7.3 so went to install that. Stopped the service and then manually installed the newer version.
It failed.
Had to go into CLI and manually kill processes. Eventually it installed and restarted.
All previous setting lost. Users etc etc.
Backed up data *survived* but had to start again with all configuration.
This should be considered ALPHA software until it gets used a bit more - especially as its is meant for BACKUP!
-
- Starting out
- Posts: 10
- Joined: Fri Nov 10, 2017 10:16 pm
Re: GoodSync QNAP Installation
nas_bob,
I'm sorry, package upgrade logic was missing. It's now done, would keep configuration on upgrade (note that it's not possible to keep configuration on uninstall however).
I'm sorry, package upgrade logic was missing. It's now done, would keep configuration on upgrade (note that it's not possible to keep configuration on uninstall however).
-
- New here
- Posts: 2
- Joined: Thu Oct 29, 2015 10:47 am
Re: GoodSync QNAP Installation
I had 10.6.7.1 installed
I stopped the service in App Center and installed latest (10.6.7.3).
GS server was upgraded correctly and restarted.
When I logon to the webUI, it asked me to setup GS Connect (as if installing for first time).
However, after doing that, all my settings (users, etc) were restored fine.
Now that we have the developer here, are you open to suggestions?
I want to add all the QNAP users as local users, but I have to enter user/password for each. Is GS able to obtain the users directly from QNAP? Present the users as a list, and select which ones can access?
Also, can GS present the QNAP filesystem as per defined shares (ie just as if that user has logged into the QNAP filestation app)?
I stopped the service in App Center and installed latest (10.6.7.3).
GS server was upgraded correctly and restarted.
When I logon to the webUI, it asked me to setup GS Connect (as if installing for first time).
However, after doing that, all my settings (users, etc) were restored fine.
Now that we have the developer here, are you open to suggestions?
I want to add all the QNAP users as local users, but I have to enter user/password for each. Is GS able to obtain the users directly from QNAP? Present the users as a list, and select which ones can access?
Also, can GS present the QNAP filesystem as per defined shares (ie just as if that user has logged into the QNAP filestation app)?
-
- Starting out
- Posts: 10
- Joined: Fri Nov 10, 2017 10:16 pm
Re: GoodSync QNAP Installation
vbappy,
Suggestions are welcome. But I'm still worried about nas_bob's situation when he had to stop service via CLI. It didn't happen to me.
And I'm still seeing some of the guys that can't run latest packages on ARM (and even x86_64, for some reason).
Suggestions are welcome. But I'm still worried about nas_bob's situation when he had to stop service via CLI. It didn't happen to me.
And I'm still seeing some of the guys that can't run latest packages on ARM (and even x86_64, for some reason).
- karlegas
- Know my way around
- Posts: 124
- Joined: Thu Apr 26, 2012 2:38 pm
- Contact:
Re: GoodSync QNAP Installation
Hi is good to have to Brittle81 here, I am using the ARM version TS-212 and the AMD TVS-463, something new about the ARM problem?
I installed the version 9.4.49 on the ARM but with firmware 4.3.3.0404 but did not shows the configuration like before. Also the last version 10.6.7.1 doesn't shows in the NAS, I don't go try the most recent yet.
This is my installation log
The start up of the service to after a clean installation
Looks the gsync did not find some files or services and cannot run
So there is not any way to access to the configuration? Or how I can help you?
Karl
I installed the version 9.4.49 on the ARM but with firmware 4.3.3.0404 but did not shows the configuration like before. Also the last version 10.6.7.1 doesn't shows in the NAS, I don't go try the most recent yet.
This is my installation log
Code: Select all
Goodsync Server post-installation script
System package directory at: /share/MD0_DATA/.qpkg/gs-server
check hardware and find appropriate binaries
Setting up binaries /share/MD0_DATA/.qpkg/gs-server/gs-server_arm_marvell -> /share/MD0_DATA/.qpkg/gs-server/gs-server
Goodsync server sanity check
/share/MD0_DATA/.qpkg/gs-server/gs-server: /usr/lib/libstdc++.so.6: version `CXXABI_ARM_1.3.3' not found (required by /share/MD0_DATA/.qpkg/gs-server/gs-server)
/share/MD0_DATA/.qpkg/gs-server/gs-server: /lib/libc.so.6: version `GLIBC_2.7' not found (required by /share/MD0_DATA/.qpkg/gs-server/gs-server)
gs-server sanity check failed.
gs-server installed successfully.
Creating initial configuration
Updating settings file: /share/MD0_DATA/.qpkg/gs-server/etc/.goodsync/server/settings.tix
Updated settings:
Applying permissions
Installation complete
Code: Select all
check for gs-server process
Attempting to start server
/share/MD0_DATA/.qpkg/gs-server/gs-server: /usr/lib/libstdc++.so.6: version `CXXABI_ARM_1.3.3' not found (required by /share/MD0_DATA/.qpkg/gs-server/gs-server)
/share/MD0_DATA/.qpkg/gs-server/gs-server: /lib/libc.so.6: version `GLIBC_2.7' not found (required by /share/MD0_DATA/.qpkg/gs-server/gs-server)
Done
So there is not any way to access to the configuration? Or how I can help you?
Karl
Favorite Apps: Deluge - Plex, Twonky and TVmobili streaming
Models: TVS-463 QTS 4.3.4 / TS-221 QTS 4.3.3
Website: http://www.karlegas.com Blog
Website: http://www.naseros.com Tutorials and News in Spanish for QNAP NAS
Models: TVS-463 QTS 4.3.4 / TS-221 QTS 4.3.3
Website: http://www.karlegas.com Blog
Website: http://www.naseros.com Tutorials and News in Spanish for QNAP NAS
- sirbc
- Starting out
- Posts: 39
- Joined: Fri Oct 10, 2008 12:10 pm
Re: GoodSync QNAP Installation
I'm seeing very slow transfer speeds on my local network from my computer to my QNAP NAS.
I've tested on two different NAS units, a 509 Pro and a TS-451. When using the Goodsync app (version 10.8.1.1) on the NAS and syncing files using Goodsync from my desktop to the NAS via Goodsync Connect, I am seeing average speeds of 16 MB/s on both NAS units. When I instead run the same Goodsync job (no encryption) but do not use the Goodsync connect app on the NAS and just sync directly to a mapped folder on the NAS, I see speeds on both NAS units average around 90MB/s.
Is this huge drop in transfer speed to be expected when using the Goodsync app on the NAS?
I've tested on two different NAS units, a 509 Pro and a TS-451. When using the Goodsync app (version 10.8.1.1) on the NAS and syncing files using Goodsync from my desktop to the NAS via Goodsync Connect, I am seeing average speeds of 16 MB/s on both NAS units. When I instead run the same Goodsync job (no encryption) but do not use the Goodsync connect app on the NAS and just sync directly to a mapped folder on the NAS, I see speeds on both NAS units average around 90MB/s.
Is this huge drop in transfer speed to be expected when using the Goodsync app on the NAS?
-
- Starting out
- Posts: 10
- Joined: Fri Nov 10, 2017 10:16 pm
Re: GoodSync QNAP Installation
sirbc,
It turns out that our code wasn't properly optimized. Please try the latest package from site.
It turns out that our code wasn't properly optimized. Please try the latest package from site.
-
- New here
- Posts: 4
- Joined: Fri Mar 26, 2021 11:56 pm
Re: GoodSync QNAP Installation
I just tried to install and cannot get it to work. Reached out to GS support and have not heard back. How did you get the install log above? I cannot find it anywhere on my QNAP. Thanks in advance for any help or insight.
-
- First post
- Posts: 1
- Joined: Thu Feb 17, 2011 3:24 am
Re: GoodSync QNAP Installation
I have installed 11.9.0 but I cannot reach the server at 192.168.1.NNN:11000
I have updated GS-Server but I cannot go back to an older version because I don't have it anymore. Can someone help with an older version?
I have updated GS-Server but I cannot go back to an older version because I don't have it anymore. Can someone help with an older version?
-
- Getting the hang of things
- Posts: 68
- Joined: Sat Dec 19, 2015 12:05 pm
Re: GoodSync QNAP Installation
If you still need it, I have a GoodSync Server version from 2018. The version number isn't shown in the filename, but the version I have installed on my TS-853A is 11.6.1.8 so I'm not sure if it's the same.mikascm wrote:I have installed 11.9.0 but I cannot reach the server at 192.168.1.NNN:11000
I have updated GS-Server but I cannot go back to an older version because I don't have it anymore. Can someone help with an older version?
Sent from my SM-G991U using Tapatalk
- degsie
- Getting the hang of things
- Posts: 83
- Joined: Fri Apr 13, 2012 8:55 am
- Location: Ireland
Re: GoodSync QNAP Installation
Does GoodSync offer a client side application that runs directly from the NAS? I installed GS server but do not see any way to set up jobs on a GUI using the QNAP NAS only. Is this possible? Thanks.
TS110 (4TB WD RED)- QTS 4.2.6 Build 20190322[Retired]
TS251A - QTS 5.0.1
TS251A - QTS 5.0.1