I can access the drive through SSH and using Midnight commander from my laptop through SFTP. Can write and copy on it.
The drive was originally formatted through QTS in ext4. I can read it just fine with my Linux laptop
Code: Select all
[~] # df
Filesystem Size Used Available Use% Mounted on
none 400.0M 282.7M 117.3M 71% /
devtmpfs 1.9G 4.0K 1.9G 0% /dev
tmpfs 64.0M 920.0K 63.1M 1% /tmp
tmpfs 1.9G 156.0K 1.9G 0% /dev/shm
tmpfs 16.0M 0 16.0M 0% /share
/dev/mmcblk0p5 7.7M 46.0K 7.7M 1% /mnt/boot_config
tmpfs 16.0M 0 16.0M 0% /mnt/snapshot/export
/dev/md9 499.5M 144.6M 354.9M 29% /mnt/HDA_ROOT
cgroup_root 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/mapper/cachedev1
7.1T 984.2G 6.1T 14% /share/CACHEDEV1_DATA
/dev/md13 417.0M 400.4M 16.6M 96% /mnt/ext
tmpfs 32.0M 27.2M 4.8M 85% /samba_third_party
tmpfs 1.0M 0 1.0M 0% /share/.quftp_client
tmpfs 48.0M 36.0K 48.0M 0% /share/CACHEDEV1_DATA/.samba/lock/msg.lock
tmpfs 16.0M 0 16.0M 0% /mnt/ext/opt/samba/private/msg.sock
tmpfs 1.0M 0 1.0M 0% /share/external/.nd
tmpfs 1.0M 0 1.0M 0% /share/external/.cm
tmpfs 1.0M 0 1.0M 0% /mnt/hm/temp_mount
/dev/sdc2 3.6T 838.1G 2.8T 23% /share/external/DEV3604_2
tmpfs 16.0M 0 16.0M 0% /share/NFSv=4
/dev/mapper/cachedev1
7.1T 984.2G 6.1T 14% /share/NFSv=4/Public
Code: Select all
[~] # lsusb
Bus 001 Device 016: ID 0bc2:ab44 Seagate RSS LLC
Bus 001 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 009: ID 0bc2:ab38 Seagate RSS LLC
Bus 002 Device 008: ID 0bc2:ab45 Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
[~] #
Also: Is it possible to install MC on the Qnap? I searched this and the solutions were old and don't seem to work anymore.
Cheers!