TS-853A
4.3.3.0238 (latest)
Hybrid Backup - 2.1.170630 (latest)
I am backing up to Amazon Glacial and I need to rate limit the backup during working hours.
My maximum upload is 1.8 MBps. I need to rate limit at 1.4 MBps to prevent bottlenecking.
When I go to profile and apply a rate limit. Whole numbers work fine. I.e. 1000 KBps or 1 MBps.
BUT decimal points do not. Any decimal results in no limit. i.e 1.4 MBps results in no rate limit.
The maximum KBps entry is 1000. So I cannot use 1400 KBps to fine tune the limit.
Any thoughts?
Rate Limit for Hybrid Backup not working
-
DHOMD
- New here
- Posts: 2
- Joined: Thu Jul 13, 2017 8:26 pm
-
Moogle Stiltzkin
- Guru
- Posts: 11445
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: Rate Limit for Hybrid Backup not working
just one ... oo 2. remember check my faq link for creating support ticket.DHOMD wrote:Any thoughts?
your welcome
http://www.attinternetservice.com/resou ... s-vs-mbps/
Last edited by Moogle Stiltzkin on Fri Jul 14, 2017 8:30 am, edited 1 time in total.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
P3R
- Guru
- Posts: 13192
- Joined: Sat Dec 29, 2007 1:39 am
- Location: Stockholm, Sweden (UTC+01:00)
Re: Rate Limit for Hybrid Backup not working
Is it really 1.8 MByte/sec? Did you measure it to be exactly that? If not where does that number come from?DHOMD wrote:My maximum upload is 1.8 MBps.
I must ask as I've never seen any ISP specifying the bandwidth in Bytes per second, they always use bits per second.
RAID have never ever been a replacement for backups. Without backups on a different system (preferably placed at another site), you will eventually lose data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!
-
DHOMD
- New here
- Posts: 2
- Joined: Thu Jul 13, 2017 8:26 pm
Re: Rate Limit for Hybrid Backup not working
@P3R Hybrid records bandwidth by default in bytes not bits. So I am just using their default bandwidth terminology.
Since I upload about 6 TB a month, I get a great rolling average, 1.84 MBps (15 mbps if you prefer) is essentially the practical upload cap of my ISP.
I sent in an email to that find a bug competition... hopefully it gets resolved.
Since I upload about 6 TB a month, I get a great rolling average, 1.84 MBps (15 mbps if you prefer) is essentially the practical upload cap of my ISP.
I sent in an email to that find a bug competition... hopefully it gets resolved.
-
P3R
- Guru
- Posts: 13192
- Joined: Sat Dec 29, 2007 1:39 am
- Location: Stockholm, Sweden (UTC+01:00)
Re: Rate Limit for Hybrid Backup not working
Yes, and hopefully you win the prize as well!DHOMD wrote:I sent in an email to that find a bug competition... hopefully it gets resolved.
RAID have never ever been a replacement for backups. Without backups on a different system (preferably placed at another site), you will eventually lose data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!