Trying to do a 1 way cloud backup sync to Backblaze B2 on a TVS-463, latest 4.3.3 firmware.
Getting a failure due to a 'disk error' but all disks showing fine. Time of error is always current time (as in if time is 11:10, error occurred at 11:10).
Backup got to about 1.5TB in size, failure first observed at 00:50 this morning.
I've tried disabling and re-enabling the job, changing the job parameters, restarting HBS and currently restarting the unit.
Any ideas?
Edit: Problem now solved. Restarting the NAS seems to have solved the issue.
Hybrid Backup Sync Disk Error [Solved]
-
- Easy as a breeze
- Posts: 389
- Joined: Fri Aug 07, 2015 7:02 pm
- Location: London, England
Hybrid Backup Sync Disk Error [Solved]
TVS-872XT-i5-16GB with 6*ST12000VNZ008 in RAID 6.
Backed up to a stack of a half dozen 'cold' external 12TB and 8TB HDDs - please back up your data, RAID is not the same as a backup!
Formerly TVS-463 with 4*WD60EFRX in RAID5, planning to reuse as an additional backup destination in the new year.
All protected by an APC SMT750VA UPS - protect your NAS from bad power!
Backed up to a stack of a half dozen 'cold' external 12TB and 8TB HDDs - please back up your data, RAID is not the same as a backup!
Formerly TVS-463 with 4*WD60EFRX in RAID5, planning to reuse as an additional backup destination in the new year.
All protected by an APC SMT750VA UPS - protect your NAS from bad power!
-
- New here
- Posts: 9
- Joined: Sat Mar 09, 2013 8:16 am
Re: Hybrid Backup Sync Disk Error [Solved]
I have the same for me. Backup from external disk to onedrive.