TS-412 disk problem

Backup, Restore, Netbak Replicator, Cloud Storage Services
Post Reply
adriano.ilgrande
New here
Posts: 3
Joined: Fri Oct 18, 2019 6:18 pm

TS-412 disk problem

Post by adriano.ilgrande »

Dear all,

I have a strange issue. My company has a TS-412 that has stopped to work due to a disk error. The previous IT admin has replaced that disk but the NAS has stopped to work. Theese are the only informations I have about it, and now this person is not in this company.

Now the NAS shows the "first setup" configuration interface, like it was the first time it is switch on. The disks (I don't know the RAID config) contains a lot of backup data that I need to restore.

How I could proceed without loosing data?

Thanks in advance.

Adriano Ilgrande
You do not have the required permissions to view the files attached to this post.
adriano.ilgrande
New here
Posts: 3
Joined: Fri Oct 18, 2019 6:18 pm

Re: TS-412 disk problem

Post by adriano.ilgrande »

UPDATE: it seems that all data is in this .locke file, but in the share there are only default folders such as Multimedia.

Any suggest?

Thansk again
You do not have the required permissions to view the files attached to this post.
User avatar
dolbyman
Guru
Posts: 34903
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: TS-412 disk problem

Post by dolbyman »

with no information about how this device was even configured (RAID?..single disks ? encrypted ?) .. it's hard to give any advice
adriano.ilgrande
New here
Posts: 3
Joined: Fri Oct 18, 2019 6:18 pm

Re: TS-412 disk problem

Post by adriano.ilgrande »

RAID5, 4 disks, not enc.
User avatar
storageman
Ask me anything
Posts: 5507
Joined: Thu Sep 22, 2011 10:57 pm

Re: TS-412 disk problem

Post by storageman »

If you choose configure disk later you should still see the pool but the settings will be lost.
Yours is cat1 model, try below
https://helpdesk.qnap.com/index.php?/Kn ... d-firmware
Post Reply

Return to “Backup & Restore”