Magnet links just sit

Post your questions about BT download, FTP download, HTTP download, or QGet download software here.
Post Reply
DataTauk
Starting out
Posts: 33
Joined: Tue Sep 26, 2017 2:02 am

Magnet links just sit

Post by DataTauk »

I been using DL Station for years. Sometimes i need to bounce it to get it going but it worked. Well this month I have updated my NAS to new disks. I actually restored my NAS as new. So I had to reset everything up. Which i expected and was fine with.

Now as I add magnets from my BT search they just sit there. no download takes place. Bounce of the BL station does not help. I have seen other threads on this but no actual fixes.

Server name NASHome
Model name TS-251+
CPU Intel(R) Celeron(R) CPU J1900 , up to 1993 MHz (4 cores, 4 threads)
Total memory 8 GB (8 GB usable)
Dual channel supported NIC_VIEW_YES
Memory slots 2 (4 GB / 4 GB)
Firmware version 5.0.0.1858 Build 20211119
System up time 1 Days 22 Hour 36 Minute(s)
Time zone (GMT-05:00) Eastern Time(US & Canada)
Filename encoding English
DataTauk
Starting out
Posts: 33
Joined: Tue Sep 26, 2017 2:02 am

Re: Magnet links just sit

Post by DataTauk »

Does anyone have this working? Or is QNAP just deprecating this feature?
dosborne
Experience counts
Posts: 1791
Joined: Tue May 29, 2018 3:02 am
Location: Ottawa, Ontario, Canada

Re: Magnet links just sit

Post by dosborne »

Personally I found DL:Station to be unreliable (granted it was years ago) and very limited in capabilities and move to Transmission (QTransmission on my NAS) and never looked back. May be worth considering or at least give it a try to see if the issues remain or go away.
QNAP TS-563-16G 5x10TB Seagate Ironwolf HDD Raid-5 NIC: 2x1GB 1x10GbE
QNAP TS-231P-US 2x18TB Seagate Exos HDD Raid-1
[Deadbolt and General Ransomware Detection, Prevention, Recovery & MORE]
Post Reply

Return to “Download Station and QGet”