[How To] pyLoad - Downloader for Rapidshare and more OCH
-
- New here
- Posts: 2
- Joined: Mon Mar 21, 2011 11:18 pm
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
Hello,
thx for the how to. I follwed every single step ... and now? Sorry, I am a noob. What do I have to do after the last step of the how to?
Thx
thx for the how to. I follwed every single step ... and now? Sorry, I am a noob. What do I have to do after the last step of the how to?
Thx
-
- Getting the hang of things
- Posts: 77
- Joined: Thu Oct 14, 2010 1:36 am
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
Your last steps must be:
or
And then you open web browser and type IP adress your qnap with specifi port 8000 (example: http://xxx.xxx.xxx.xxx:800), on this adress is web admin page for add and manage download via pyload on your qnam nas.
Code: Select all
python /opt/pyload/pyLoadCore.py --daemon
Code: Select all
screen -dmS python /opt/pyload/pyLoadCore.py
-----------------------------------------------------------------
Qnap TS-210 - 1x Samsung 2TB SpinPoint F4EG HD204UI
-----------------------------------------------------------------
Qnap TS-210 - 1x Samsung 2TB SpinPoint F4EG HD204UI
-----------------------------------------------------------------
-
- New here
- Posts: 2
- Joined: Mon Mar 21, 2011 11:18 pm
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
Ok, thx. It says pyload is already running with pid xxx
Then type in the webbrowser QNAP.IP:8000 but it says page not found.
Of course I activated the web admin during setup.
Then type in the webbrowser QNAP.IP:8000 but it says page not found.
Of course I activated the web admin during setup.
-
- Getting the hang of things
- Posts: 77
- Joined: Thu Oct 14, 2010 1:36 am
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
Try stop service and start with this command
In terminal not happen, but in web browser can log to pyload.
Maybe must start webserver on qnap (but I'm not sure).
Code: Select all
screen -dmS python /opt/pyload/pyLoadCore.py
Maybe must start webserver on qnap (but I'm not sure).
-----------------------------------------------------------------
Qnap TS-210 - 1x Samsung 2TB SpinPoint F4EG HD204UI
-----------------------------------------------------------------
Qnap TS-210 - 1x Samsung 2TB SpinPoint F4EG HD204UI
-----------------------------------------------------------------
- QNAPJames
- QNAP Staff
- Posts: 1498
- Joined: Fri Jun 13, 2008 3:12 pm
- Location: Irvine, California
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
NAS: QNAP TS-464T4 Special Edition + Seagate IronWolf 125 3.84TB SATA SSD * 4 (RAID5)
Backup: QNAP TR-002 + Seagate IronWolf 10TB SATA HDD *2 (RAID0)
Networking: QNAP QSW-1108-8T 2.5GbE Network Switch
Backup: QNAP TR-002 + Seagate IronWolf 10TB SATA HDD *2 (RAID0)
Networking: QNAP QSW-1108-8T 2.5GbE Network Switch
-
- Starting out
- Posts: 20
- Joined: Tue Dec 22, 2009 12:09 am
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
I wonder why is this build based on an older pyLoad version?
-
- Know my way around
- Posts: 118
- Joined: Mon Nov 16, 2009 7:35 am
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
me too..
is there a way to update pyLoad versione without loosing the QPKG advantages?
i want the captchatrader plugin lol!
btw, really (and i mean really) a great tool!
the only little problem i've found is that when the server has problem (overloaded, maybe) pyLoad does not understand that it downloads just and error page (some bytes) instead of the right file (many Mb) and gives the file as "completed"
this could be a fix for the future..
is there a way to update pyLoad versione without loosing the QPKG advantages?
i want the captchatrader plugin lol!
btw, really (and i mean really) a great tool!
the only little problem i've found is that when the server has problem (overloaded, maybe) pyLoad does not understand that it downloads just and error page (some bytes) instead of the right file (many Mb) and gives the file as "completed"
this could be a fix for the future..
--
TS-210 with 2x Samsung EcoGreen 1.5Tb Raid-1 - firmware 4.1.0
TS-210 with 2x Samsung EcoGreen 1.5Tb Raid-1 - firmware 4.1.0
-
- Starting out
- Posts: 19
- Joined: Thu Mar 17, 2011 11:36 pm
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
Hi. I finally found how to start pyload after reboot automatically.
Look at my last post in this thread.
http://forum.qnap.com/viewtopic.php?f=1 ... 37#p190237
Enjoy..
Look at my last post in this thread.
http://forum.qnap.com/viewtopic.php?f=1 ... 37#p190237
Enjoy..
-
- Starting out
- Posts: 40
- Joined: Sat May 22, 2010 10:51 pm
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
Hi, I've been using pyLoad for two weeks and it has been a very good substitute of Download Station, but I'm having some issues . . .
First I installed it manually and got it working, but sometimes had to restart it through putty because downloads would randomly not start.
So I removed it and installed the QPKG plugin and got it working again, the first day everything works well, on the day after downloads start but files are saved as 0kb. If I restart the NAS it starts to donwload correctly.
What is causing this, is it when my ISP changes my IP?
And also, normally downloaded package folders can be read by everyone but only admin account can move or delete the folders. How do I set it so my other user accounts can access pyload download folder and edit their downloads?
I've managed a workaround but I have to enter NAS admin page and on folder permissions add more users to the new package folders.
There must be a easier setup on pyLoad but I'm not getting there.
Thanks.
First I installed it manually and got it working, but sometimes had to restart it through putty because downloads would randomly not start.
So I removed it and installed the QPKG plugin and got it working again, the first day everything works well, on the day after downloads start but files are saved as 0kb. If I restart the NAS it starts to donwload correctly.
What is causing this, is it when my ISP changes my IP?
And also, normally downloaded package folders can be read by everyone but only admin account can move or delete the folders. How do I set it so my other user accounts can access pyload download folder and edit their downloads?
I've managed a workaround but I have to enter NAS admin page and on folder permissions add more users to the new package folders.
There must be a easier setup on pyLoad but I'm not getting there.
Thanks.
TS-453A - 4.4.1 - 2x 3TB WD RED - 1 x 2TB Hitachi HDS722020ALA330JKAO - 1x 120GB SSD kingston
TS-239 Pro II - 4.2.6 - 1x 2TB Hitachi HDS722020ALA330JKAO
TS-121 - 4.2.6 - 1x 2TB WDC WD20EFRX-68EUZN080.0
TS-239 Pro II - 4.2.6 - 1x 2TB Hitachi HDS722020ALA330JKAO
TS-121 - 4.2.6 - 1x 2TB WDC WD20EFRX-68EUZN080.0
-
- Starting out
- Posts: 40
- Joined: Sat May 22, 2010 10:51 pm
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
In "admnistrate" I created a new user group, added admin account and all pc usernames/passwords that have access to the nas.
Then in config permissions changed to that groupname, turned all options on, set filemode to 0664 and folder to 0775 and now I can delete/move files/folders of pyload download folder with other windows PC username accounts.
I also disabled unrar because some files got randomly "not existing" mode, like when I try to delete a file Windows reports file doesn't exist, and the only way to delete is from FileManager.
This, I still haven't figured it out . . .
Cheers
Then in config permissions changed to that groupname, turned all options on, set filemode to 0664 and folder to 0775 and now I can delete/move files/folders of pyload download folder with other windows PC username accounts.
I also disabled unrar because some files got randomly "not existing" mode, like when I try to delete a file Windows reports file doesn't exist, and the only way to delete is from FileManager.
This, I still haven't figured it out . . .
Cheers
TS-453A - 4.4.1 - 2x 3TB WD RED - 1 x 2TB Hitachi HDS722020ALA330JKAO - 1x 120GB SSD kingston
TS-239 Pro II - 4.2.6 - 1x 2TB Hitachi HDS722020ALA330JKAO
TS-121 - 4.2.6 - 1x 2TB WDC WD20EFRX-68EUZN080.0
TS-239 Pro II - 4.2.6 - 1x 2TB Hitachi HDS722020ALA330JKAO
TS-121 - 4.2.6 - 1x 2TB WDC WD20EFRX-68EUZN080.0
-
- New here
- Posts: 9
- Joined: Thu Aug 21, 2008 3:20 am
pyload download problem
Hello all,
INFO Download starts: pbr102.rar
WARNING Download failed: pbr102.rar | unsupported operand type(s) for /: 'NoneType' and 'int'
I'm using Rapidshare premium.
What i'm doing wrong ?
Thanks to all.
INFO Download starts: pbr102.rar
WARNING Download failed: pbr102.rar | unsupported operand type(s) for /: 'NoneType' and 'int'
I'm using Rapidshare premium.
What i'm doing wrong ?
Thanks to all.
-
- New here
- Posts: 9
- Joined: Fri Apr 15, 2011 1:36 am
Re: pyload download problem
ros46 wrote:Hello all,
INFO Download starts: pbr102.rar
WARNING Download failed: pbr102.rar | unsupported operand type(s) for /: 'NoneType' and 'int'
I'm using Rapidshare premium.
What i'm doing wrong ?
Thanks to all.
same here
-
- Starting out
- Posts: 15
- Joined: Thu Apr 14, 2011 2:12 pm
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
you are doing nothing wrong... need to get latest rapidshare plugin ... see post here:
http://forum.pyload.org/viewtopic.php?f=12&t=653
http://forum.pyload.org/viewtopic.php?f=12&t=653
- paolomarino
- Easy as a breeze
- Posts: 309
- Joined: Sat Jun 13, 2009 3:24 am
- Location: Ironforge
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
i have installed the latest tip pyload version with this guide
everithing fine
thanks
ps
i have python qkpg and python ipkg both installed
i have changed the pyload startup command including the pyton ipkg full path
and all works fine
everithing fine
thanks
ps
i have python qkpg and python ipkg both installed
i have changed the pyload startup command including the pyton ipkg full path
and all works fine
Happy Qnap TS-509 Ultra (Intel E7500 + 2GB RAM + 20TB WD RED) Owner
Happy Qnap TS-870 Ultra (Intel I7-3770T + 16GB RAM + 64TB WD RED) Owner
Happy Qnap TS-870 Ultra (Intel I7-3770T + 16GB RAM + 64TB WD RED) Owner
-
- Starting out
- Posts: 40
- Joined: Sat May 22, 2010 10:51 pm
Re: [How To] pyLoad - Downloader for Rapidshare and more OC
I'm running pyload qpkg version, how do I set pyload to start after reboot?
After install pyload works very well, but after a day or two my premium accounts fail to start downloads.
So I tried to reboot Nas but pyload web page doesn't start even if it is enabled in the admin page.
I've been removing and reinstalling pyload as a workaround, but I've to setup accounts and users config again . . .
and how do I start manually pyload qpkg through PuTTy?
I've found pyload at
/share/HDA_DATA/.qpkg/pyload/
but when I try to start it with python it shows some lines that end with
IOError: [Errno 13] Permission denied: u'Logs/log.txt'
After install pyload works very well, but after a day or two my premium accounts fail to start downloads.
So I tried to reboot Nas but pyload web page doesn't start even if it is enabled in the admin page.
I've been removing and reinstalling pyload as a workaround, but I've to setup accounts and users config again . . .
and how do I start manually pyload qpkg through PuTTy?
I've found pyload at
/share/HDA_DATA/.qpkg/pyload/
but when I try to start it with python it shows some lines that end with
IOError: [Errno 13] Permission denied: u'Logs/log.txt'
TS-453A - 4.4.1 - 2x 3TB WD RED - 1 x 2TB Hitachi HDS722020ALA330JKAO - 1x 120GB SSD kingston
TS-239 Pro II - 4.2.6 - 1x 2TB Hitachi HDS722020ALA330JKAO
TS-121 - 4.2.6 - 1x 2TB WDC WD20EFRX-68EUZN080.0
TS-239 Pro II - 4.2.6 - 1x 2TB Hitachi HDS722020ALA330JKAO
TS-121 - 4.2.6 - 1x 2TB WDC WD20EFRX-68EUZN080.0