[How To] pyLoad - Downloader for Rapidshare and more OCH

Post your questions about BT download, FTP download, HTTP download, or QGet download software here.
Post Reply
RaNaN
Starting out
Posts: 20
Joined: Tue Dec 22, 2009 12:09 am

[How To] pyLoad - Downloader for Rapidshare and more OCH

Post by RaNaN » Thu Aug 19, 2010 2:35 am

pyLoad How-To

Note: There is a pyLoad forum and a QPKG plugin now: viewforum.php?f=232

Hi everyone I would like to present a little tutorial how to install pyLoad on your qnap.

just one sentence about pyLoad: It supports all common one click hoster, has many other features and is lightweight enough to run on minimal systems. More information can be found on the official page http://pyload.org

Requirements:
  • SSH access
  • Optware IPKG

Step 1: Prepare
Install the Optware QPKG Plugin.
In case you have installed the Python QPKG Plugin you have to deinstall it, because it will conflict later.

Step 2: Install needed tools
Login at your QNAP and execute this code.

Code: Select all

ipkg install wget tesseract-ocr tesseract-ocr-lang-eng ossp-js unrar


Step 3: Get pyLoad

Code: Select all

cd /opt
wget http://get.pyload.org/get/ipkg
ipkg install pyload-v0.4.9-noarch.ipk
rm pyload-v0.4.9-noarch.ipk


You can start pyLoad simply with:

Code: Select all

pyLoadCore


When you do this the first time you should see a configuration assistant.
Make sure to enable the webinterface, because its the easiest way to access pyLoad remotely. Over the webinterface you are able to do more configuration and add premium accounts.

Step 4: Run pyLoad (as daemon)
You have to start pyLoad in background or it will be closed as soon as you logout from your box. Since version 0.4.3 pyLoad has a builtin daemon mode.

Code: Select all

pyLoadCore --daemon

You can quit pyLoad with;

Code: Select all

pyLoadCore --quit


I hope this helps you to run pyLoad on your box. Dont hesitate to ask any questions here or at the pyLoad forum.

Best regards
RaNaN
Last edited by RaNaN on Thu Dec 15, 2011 5:04 am, edited 18 times in total.

jackalope
Know my way around
Posts: 100
Joined: Mon May 04, 2009 8:50 pm

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by jackalope » Sat Aug 21, 2010 2:10 am

hi guy
thanks for tutorial
ts-119
it works great!!!!

thanks

regards

idefx
First post
Posts: 1
Joined: Tue Aug 24, 2010 8:49 pm

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by idefx » Tue Aug 24, 2010 8:55 pm

Hello,

Thanks for the tutorial.

I have another question though. Can someone explain me how to launch it at the startup of the NAS?

I tried to add it to startup scripts in the ramblock as I usually do (following the instructions found in http://wiki.qnap.com/wiki/Running_Your_ ... at_Startup), but it doesn't work.

I expect it to be related to the fact the Python & PyLoad are in the /opt directory, and they may not be easilly accessible during the startup.

Any idea to work this out?

Thanks in advance,

jackalope
Know my way around
Posts: 100
Joined: Mon May 04, 2009 8:50 pm

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by jackalope » Wed Aug 25, 2010 12:10 am

i tried me too but the result was the same...didn't work by editing autorstart.sh
i though that, if i need to load MU links in pyload probably i've my pc powerd up so i prepared a fast link to putty.exe to start manually pyload.
but if you find a method to autostart i will try for sure!!!!

thanks regards

ermethic
Starting out
Posts: 49
Joined: Tue May 19, 2009 11:05 pm

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by ermethic » Wed Aug 25, 2010 5:17 pm

it all worked fine, except the backgrounding with screen didn't work until i changed the permissions on the py core script to +x

jackalope
Know my way around
Posts: 100
Joined: Mon May 04, 2009 8:50 pm

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by jackalope » Wed Aug 25, 2010 5:29 pm

do you mean it work also the autostart?

thanks
regards

alex919
Starting out
Posts: 10
Joined: Sat Nov 14, 2009 10:02 pm

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by alex919 » Thu Aug 26, 2010 1:46 am

Does it support flashgot??

RaNaN
Starting out
Posts: 20
Joined: Tue Dec 22, 2009 12:09 am

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by RaNaN » Thu Aug 26, 2010 6:27 pm

Yes, when you foward port 9666 from you local PC to your NAS, and use the FlashGot setting for JDownloader.

jackalope
Know my way around
Posts: 100
Joined: Mon May 04, 2009 8:50 pm

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by jackalope » Fri Aug 27, 2010 2:31 am

ermethic wrote:it all worked fine, except the backgrounding with screen didn't work until i changed the permissions on the py core script to +x


thanks to ranan for the change in tutorial...
i confirm it works on ts-119!

sponch
Getting the hang of things
Posts: 58
Joined: Thu Apr 30, 2009 4:16 am

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by sponch » Wed Sep 01, 2010 6:18 pm

thanks for that!
unfortunately http://get.pyload.org/get/0.4.0/ is not available..404 page not found. when will there be an update?
sponch

RaNaN
Starting out
Posts: 20
Joined: Tue Dec 22, 2009 12:09 am

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by RaNaN » Thu Sep 02, 2010 12:39 am

I updated the url, thanks for comment

Vanhall
First post
Posts: 1
Joined: Fri Sep 03, 2010 4:38 am

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by Vanhall » Sun Sep 05, 2010 6:02 pm

Hello, I am amateur with installing plugins to NAS. Please help with it. I have installed Optware QPKG Plugin. And now i dont know what I have to do. To login to NAS I have to use Internet browser or some application for example WinSCP? I dont know have execute codes and where. Can you write me a some instructions for amateur? Thanks :wink: . And sorry for my bad english. :oops:

RaNaN
Starting out
Posts: 20
Joined: Tue Dec 22, 2009 12:09 am

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by RaNaN » Mon Sep 06, 2010 5:15 pm

You need to enable ssh and login with Putty,then follow the tutorial, but some basic linux knowledge would be helpful.

RaNaN
Starting out
Posts: 20
Joined: Tue Dec 22, 2009 12:09 am

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by RaNaN » Tue Sep 07, 2010 2:27 am

pyLoad 0.4.1 just realeased! To update only overwrite the files in your pyload folder with newest zip.
http://get.pyload.org/get/src/0.4.1/

sponch
Getting the hang of things
Posts: 58
Joined: Thu Apr 30, 2009 4:16 am

Re: [How To] pyLoad - Downloader for Rapidshare and more OC

Post by sponch » Tue Sep 07, 2010 5:50 pm

hi how can I reinitiate the "setup" because there went something wrong with username and password and now i cant log in to webinterface
...

Post Reply

Return to “Download Station and QGet”