Twonky disappeared after fw upgrade
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Twonky disappeared after fw upgrade
Option3 would be nice .. but is wishful thinking
Option4 involves an investment that seems more than the 20 bucks required for a twonky license
Option4 involves an investment that seems more than the 20 bucks required for a twonky license
-
- New here
- Posts: 8
- Joined: Fri Jun 01, 2012 1:57 pm
Re: Twonky disappeared after fw upgrade
What is TS-212 status? Did you solve all the problems (web, cpu usage, visibility in win10, ...)? What twonky package did you used (link)? Thanks.AdamKH wrote:..., on the TS212 it installed well on 4.3.3 (again with the Websever issue) and indexed quickly. However it quickly became CPU and RAM intensive. This resulted in the TS212 not being visible to Windows 10 File Explorer and on some occasions not being able to map a network drive using QFinder Pro. This is exactly the same issue that I encountered with the QNAP Media Streaming add-on which is currently under investigation.
It is likely that there is an alternate issue with the TS212 which is causing problems on that device as in idle (with no packages and no access) runs at 18% CPU utilisation and 70% ram usage.
For the moment I have worked around by only using two Twonky installs (one with 50,000 tracks on the TS431, one with 39,000 tracks on the TS453A) I ran the small music repository (5,500 tracks) using Plex on my Synology DS416.
With the QNAP DNLA Server/Media Streaming Add-on I found inconsistency in reading the ID3 Tags resulting in splitting of albums, reordering track numbers and generating invalid genres.
-
- New here
- Posts: 3
- Joined: Thu Oct 28, 2010 9:12 pm
Re: Twonky disappeared after fw upgrade
Hi all
I have checked the posts, but am unable to find the package to suit TS-X39 and TS-X69 NAS
Any help will be greatly appreciated, as i prefer the TWONKY to the DNLA
Cheers
I have checked the posts, but am unable to find the package to suit TS-X39 and TS-X69 NAS
Any help will be greatly appreciated, as i prefer the TWONKY to the DNLA
Cheers
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Twonky disappeared after fw upgrade
depending on what firmware you're on, it would be x86 or x64
- Toxic17
- Ask me anything
- Posts: 6477
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: RE: Re: Twonky disappeared after fw upgrade
And more complaining, writing posts etc. One transaction of $20 and you don't have any issues after that unless twonky goes out of business hahahadolbyman wrote:Option3 would be nice .. but is wishful thinking
Option4 involves an investment that seems more than the 20 bucks required for a twonky license
Sent from my ONEPLUS A3003 using Tapatalk
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
-
- Starting out
- Posts: 15
- Joined: Wed Jun 23, 2010 2:04 pm
Re: Twonky disappeared after fw upgrade
Hi all
I like you all have now realized I have lost twonky, I have a ts 239 I will pay for the license but can some one please tell me once bought how do I get it on to my qnap and where do I get a qpak for it.
wish they had done this for the squeezebox which they just dropped and left me with know options.
Thank you all for your help
I like you all have now realized I have lost twonky, I have a ts 239 I will pay for the license but can some one please tell me once bought how do I get it on to my qnap and where do I get a qpak for it.
wish they had done this for the squeezebox which they just dropped and left me with know options.
Thank you all for your help
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: Twonky disappeared after fw upgrade
https://license.qnap.com/activate.htmlJohn Hammond wrote:Hi all
I like you all have now realized I have lost twonky, I have a ts 239 I will pay for the license but can some one please tell me once bought how do I get it on to my qnap and where do I get a qpak for it.
wish they had done this for the squeezebox which they just dropped and left me with know options.
Thank you all for your help
Toxic wrote: Only thing I can suggest is check you license with https://smartlynx.lynxtechnology.com/user/login.php if it looks ok, then raise a support call with Twonky.
help@twonky.com
Toxic17 wrote:Depends on what firmware you are running on as one would be free the other you would need the license.
QNAP did in the past had built in Twonky to its firmware releases, but since several months pasts they dropped Twonky and the Volume license (free to users)
Old firmware may contain the old twonky, but is severely vulnerable from exploits found in the firmware. I suggest using the latest available firmware, then download Twonky from Twonky's own website. this has a 30 day trial, then you must pay for the use of it. ($20 or €20)
the latest QPKG is 8.4.1 at time of writing.
http://www.twonkyforum.com/downloads/8.4.1/
Topic moved to Twonky forum.
How to install Twonky Server on a QNAP NAS?
Download the QPKG file for your NAS to your computer. Then you have to open the app center on you QNAP NAS and click the gear-wheel in the upper right corner. There you have to select the QPKG file that you just downloaded on your computer and click install.
The QPKG packages are available in the Twonkyforum's download section.
Source:
https://docs.twonky.com/display/TF/Twon ... +End-users
Ok found it. Go here Then download for x86, x64 qnap qpkg etc... whichever is for your particular unit.
Code: Select all
http://twonkyforum.com/downloads/
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- Starting out
- Posts: 15
- Joined: Wed Jun 23, 2010 2:04 pm
Re: Twonky disappeared after fw upgrade
thank you Moogle Stiltzkin
-
- New here
- Posts: 8
- Joined: Fri Jun 01, 2012 1:57 pm
Re: Twonky disappeared after fw upgrade
hi,
I finally updated my TS-212 to QTS 4.3.3.0262 firmware. And twonky (version 8.1.1.0) is still working. It is still present in app center, no update is available (only stop and remove). It is not removed from system as was announced by release notes.
Anybody faced the same situation?
W
PS: still not sure which Twonky build should I possibly use for manual install for TS-212.
Qnap arm-x09 package
Qnap arm-x19 package
Qnap arm-x31 package
Qnap arm-x41 package
Qnap x86 package
Qnap x86-64 package
EDIT: I am reading about other guys have problems with QTS4.3 + transmission... Transmission is working for me... QTS 4.3.3.0262 + Transmission v2.84-b24 ?!?
https://forum.transmissionbt.com/viewtopic.php?t=18439
I finally updated my TS-212 to QTS 4.3.3.0262 firmware. And twonky (version 8.1.1.0) is still working. It is still present in app center, no update is available (only stop and remove). It is not removed from system as was announced by release notes.
So, Iam confused. I have twonky running but in old version. Is it possible to update twonky manually?- Twonky Server is no longer supported. Use the DLNA Media Server built into QTS as your DLNA server.
Anybody faced the same situation?
W
PS: still not sure which Twonky build should I possibly use for manual install for TS-212.
Qnap arm-x09 package
Qnap arm-x19 package
Qnap arm-x31 package
Qnap arm-x41 package
Qnap x86 package
Qnap x86-64 package
EDIT: I am reading about other guys have problems with QTS4.3 + transmission... Transmission is working for me... QTS 4.3.3.0262 + Transmission v2.84-b24 ?!?
https://forum.transmissionbt.com/viewtopic.php?t=18439
Last edited by wooff on Wed Sep 06, 2017 4:59 am, edited 1 time in total.
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
- Toxic17
- Ask me anything
- Posts: 6477
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: Twonky disappeared after fw upgrade
[New Feature]
- TwonkyMedia DLNA Server v8.3 is now a built-in feature for certain NAS models
strange considering 8.4.1 is the latest version:)
must say though at least QNAP are now fixing some needed issues!
- TwonkyMedia DLNA Server v8.3 is now a built-in feature for certain NAS models
strange considering 8.4.1 is the latest version:)
must say though at least QNAP are now fixing some needed issues!
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
- Toxic17
- Ask me anything
- Posts: 6477
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: Twonky disappeared after fw upgrade
skypx wrote:Hey Simon,
Did you upgrade to 4.3.3.0299 Build 20170901 yet?
I can confirm Twonky is on the TS-121 and TVS 463 firmwares.
TS-121 has Twonky Server 8.2.1 on it.
not trying the TVS-463 as this has my licensed version of Twonky on it.
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Twonky disappeared after fw upgrade
that would normally be an announcement worth 3 emails from the QNAP marketing department .. weird .. too much trouble with their own DLNA ?
- Toxic17
- Ask me anything
- Posts: 6477
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: Twonky disappeared after fw upgrade
or too many complaints about removing Twonky in the first place. it just works...dolbyman wrote:that would normally be an announcement worth 3 emails from the QNAP marketing department .. weird .. too much trouble with their own DLNA ?
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Twonky disappeared after fw upgrade
I know, I am a big fan of twonky, used it for years .. never had any issues .. as you said .. just works