Hi,
I would really appreciate an help here. I used Twonky on my different NAS for several years. Recently I decided to try Plex instead on my Qnap TS-439. Since then I'm not able to restart Twonky. When I launch the app, I get the Safari message "Safari Can't Connect to the Server my.nas.ip:9000"
Any idea? (I have a huge media library and Twonky is still the only one that give a good performance!
thanks
Andrew
Qnap TS-439 Pro II+ : unable to access Twonky :9000
-
- First post
- Posts: 1
- Joined: Tue Mar 21, 2017 12:44 am
-
- First post
- Posts: 1
- Joined: Sun Oct 22, 2017 10:49 pm
Re: Qnap TS-439 Pro II+ : unable to access Twonky :9000
Solved ? Have the same problem
-
- New here
- Posts: 5
- Joined: Sun Jan 24, 2010 6:07 pm
Re: Qnap TS-439 Pro II+ : unable to access Twonky :9000
Hi, did you enable Sonos support on your Twonky Server? If yes, then check http://my.nas.ip:10243 - and you will find it.
This took me hours of search because it is only mentioned under the Sonos support option that the port will change, but not to which port.
And yes, I agree that Plex is still not performant enough on my TS-253A.
Good luck!
PS: If that does not work, this is how I found the right port: On your NAS, the file ../etc/config/twonkyvision-mediaserver6.ini contains all the necessary options. In my case due to my switch to SONOS support, the option is like this
# Port of the http server
httpport=10243
This took me hours of search because it is only mentioned under the Sonos support option that the port will change, but not to which port.
And yes, I agree that Plex is still not performant enough on my TS-253A.
Good luck!
PS: If that does not work, this is how I found the right port: On your NAS, the file ../etc/config/twonkyvision-mediaserver6.ini contains all the necessary options. In my case due to my switch to SONOS support, the option is like this
# Port of the http server
httpport=10243
Model: SS-439 Pro | FW: 3.3.6-1110T | 2xHD WDC WD5000BEVT-75ZAT01.0 | RAID: Mirroring