iOS Wireguard connected but no response from NAS

iPhone, Windows Mobile, Symbian, Android
Post Reply
te-deum
New here
Posts: 2
Joined: Tue Oct 04, 2022 8:37 pm

iOS Wireguard connected but no response from NAS

Post by te-deum »

Hello,

I have a TS-451 with QTS 5.0.1. I configure WireGuard to connect to the NAS when I am outside.
Everything is working on my Laptop and on my Android Phone. I connect and have QSync / QFile working.

When I connect with my iPads and my iPhones, I don't have access to the NAS.
Connection is OK, handshake is OK, QNap Wireguard can see the mobile and tablet on the list.
But I cannot connect to QFile/QManager/... and I cannot connect to the HTTP management via IP. I don't have any route to the NAS that is working.

I try to change MTU and some other parameters without success. I still cannot access to my file via the WireGuard VPN.


I try to connect via OpenVPN and QVPN but I have a message that say : Check if the username and password are correct.
I double/triple check login and password (according that it is those of the NAS user).

Have you any idea on how I can connect to the NAS with iOS devices ?

Here are some of the parameters of the WireGuard app on an iPad :
Adress : 192.18.7.6/32
Port : 51820
MTU : Try 1280, 1480, 1500, auto
DNS : 9.9.9.9
Endpoint : XX.XX.XX.XX:51820 (IP is correct)
Allowed IPs : 192.168.150.200/32 (QNap NAS IP on the local network)

Thank you for your help.
te-deum
New here
Posts: 2
Joined: Tue Oct 04, 2022 8:37 pm

Re: iOS Wireguard connected but no response from NAS

Post by te-deum »

I found my error !
It is on address. I type 192 instead of 198 !

Now everything is working.
Post Reply

Return to “Mobile Devices”