Hello,
I have a TS-451 with QTS 5.0.1. I configure WireGuard to connect to the NAS when I am outside.
Everything is working on my Laptop and on my Android Phone. I connect and have QSync / QFile working.
When I connect with my iPads and my iPhones, I don't have access to the NAS.
Connection is OK, handshake is OK, QNap Wireguard can see the mobile and tablet on the list.
But I cannot connect to QFile/QManager/... and I cannot connect to the HTTP management via IP. I don't have any route to the NAS that is working.
I try to change MTU and some other parameters without success. I still cannot access to my file via the WireGuard VPN.
I try to connect via OpenVPN and QVPN but I have a message that say : Check if the username and password are correct.
I double/triple check login and password (according that it is those of the NAS user).
Have you any idea on how I can connect to the NAS with iOS devices ?
Here are some of the parameters of the WireGuard app on an iPad :
Adress : 192.18.7.6/32
Port : 51820
MTU : Try 1280, 1480, 1500, auto
DNS : 9.9.9.9
Endpoint : XX.XX.XX.XX:51820 (IP is correct)
Allowed IPs : 192.168.150.200/32 (QNap NAS IP on the local network)
Thank you for your help.
iOS Wireguard connected but no response from NAS
-
- New here
- Posts: 2
- Joined: Tue Oct 04, 2022 8:37 pm
-
- New here
- Posts: 2
- Joined: Tue Oct 04, 2022 8:37 pm
Re: iOS Wireguard connected but no response from NAS
I found my error !
It is on address. I type 192 instead of 198 !
Now everything is working.
It is on address. I type 192 instead of 198 !
Now everything is working.