QNAP in two iSCSI

iSCSI related applications
asimo1987
New here
Posts: 3
Joined: Tue Nov 14, 2017 11:07 am

QNAP in two iSCSI

Postby asimo1987 » Tue Nov 14, 2017 11:14 am

Hi!

I am currently applying a VLAN in our existing network.

VLAN0 = 192.168.10.1
VLAN1 = 192.168.20.1
VLAN2 = 192.168.30.1
VLAN3 = 192.168.40.1

Each VLAN has a Windows Server 2016 installed.

With this VLAN, my QNAP TS451-U was installed and connected at VLAN0 carrying the IP Address 192.168.10.3.
I have no problem connecting my QNAP using iSCSI in the Windows Server 2016 at VLAN0.
However, I wanted this QNAP to be connected in other VLANs servers.

How am I going to do such?

Thank you so much.

User avatar
storageman
Experience counts
Posts: 2048
Joined: Thu Sep 22, 2011 10:57 pm

Re: QNAP in two iSCSI

Postby storageman » Tue Nov 14, 2017 4:43 pm

Use LUN masking to limit connections to each server.

asimo1987
New here
Posts: 3
Joined: Tue Nov 14, 2017 11:07 am

Re: QNAP in two iSCSI

Postby asimo1987 » Tue Nov 14, 2017 6:14 pm

Is it possible to connect the QNAP in all other VLANs?

User avatar
storageman
Experience counts
Posts: 2048
Joined: Thu Sep 22, 2011 10:57 pm

Re: QNAP in two iSCSI

Postby storageman » Tue Nov 14, 2017 7:23 pm


asimo1987
New here
Posts: 3
Joined: Tue Nov 14, 2017 11:07 am

Re: QNAP in two iSCSI

Postby asimo1987 » Wed Nov 15, 2017 8:24 am

I see. Thanks! :)

But, The QNAP we are using only has two NIC cards. Would that still be possible?

User avatar
storageman
Experience counts
Posts: 2048
Joined: Thu Sep 22, 2011 10:57 pm

Re: QNAP in two iSCSI

Postby storageman » Wed Nov 15, 2017 5:20 pm



Return to “iSCSI – Target & Virtual Disk”

Who is online

Users browsing this forum: No registered users and 1 guest