ISCSI error after last update 5.0.0.1986
-
- New here
- Posts: 5
- Joined: Sat Aug 01, 2009 9:10 pm
ISCSI error after last update 5.0.0.1986
Hello, I have a problem after the last update. Every iSCSI LUN drive was showing "unknown error", so I tried to unmount the drives and it can't get them working, it has been constantly "Removing .. NaN%" for days
I cannot lose data..
Anyone know how I can fix this situation?
I cannot lose data..
Anyone know how I can fix this situation?
You do not have the required permissions to view the files attached to this post.
-
- Experience counts
- Posts: 2043
- Joined: Thu Mar 03, 2016 1:11 am
Re: ISCSI error after last update 5.0.0.1986
A downgrade to previous used version (which one was it)?
Regards
BTW: If data is important, an external backup is mandatory! A raid is never ever a substitute for backup!
Regards
BTW: If data is important, an external backup is mandatory! A raid is never ever a substitute for backup!
A raid is never a substitute for backup! Never!
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
-
- New here
- Posts: 5
- Joined: Sat Aug 01, 2009 9:10 pm
Re: ISCSI error after last update 5.0.0.1986
I wanted to downgrade but I stopped in front of this screen, I would not want to make it worse ...
I have not yet replicated the LUN volumes as they are compatible only with Hero it seems .. and it is the only NAS with this system
I have not yet replicated the LUN volumes as they are compatible only with Hero it seems .. and it is the only NAS with this system
You do not have the required permissions to view the files attached to this post.
-
- Experience counts
- Posts: 2043
- Joined: Thu Mar 03, 2016 1:11 am
Re: ISCSI error after last update 5.0.0.1986
That is, why no-one writes down his NAS or firmware version! Everyone cries for help without giving any idea what the current configuration it is/was!
This is an English forum, you should at least set the desktop language to English when posting such screenshots!
I know that there is a warning message every time when a downgrade was triggered.
What has your problem to do with QuTS hero? Do you run hero at your NAS?
Regards
This is an English forum, you should at least set the desktop language to English when posting such screenshots!
I know that there is a warning message every time when a downgrade was triggered.
What has your problem to do with QuTS hero? Do you run hero at your NAS?
Regards
A raid is never a substitute for backup! Never!
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
-
- New here
- Posts: 5
- Joined: Sat Aug 01, 2009 9:10 pm
Re: ISCSI error after last update 5.0.0.1986
I use QTSHero, I did the downgrade (as recommended also by the support) and this is the situation, drastically worsened
You do not have the required permissions to view the files attached to this post.
-
- Experience counts
- Posts: 2043
- Joined: Thu Mar 03, 2016 1:11 am
Re: ISCSI error after last update 5.0.0.1986
As far as I can read in your screenshot hero do not support a downgrade.
If support advises you to do so, I am really surprised .
Anyhow, if support is already involved I hope it turns to a lucky end.
Regards
If support advises you to do so, I am really surprised .
Anyhow, if support is already involved I hope it turns to a lucky end.
Regards
A raid is never a substitute for backup! Never!
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
Deadbolt - READ 1st post!!!
Deadbolt - information
Deadbolt - find your OP_RETURN!
VPN=VPN? No!
How to clean up your NAS after malware attack
www.raidisnotabackup.com
-
- Starting out
- Posts: 12
- Joined: Sat Apr 02, 2022 12:54 am
Re: ISCSI error after last update 5.0.0.1986
I had the same "unknown error" message when mapping a LUN to a target. It's a generic error message presented in the GUI. You'll want to enable SSH on your NAS and SSH into the device. I have a post that provides some commands that you can issue that'll help you determine what the actual problem is. In my case, the device could not be found. This is a bit different as the LUN was there and appeared healthy however it turned out the linux system hadn't properly mapped it.
If you're comfortable with linux and linux commands check out this post: viewtopic.php?f=180&t=165908
QNAP support was extremely slow to respond but I found them very effective once they dug into the issue.
If you're comfortable with linux and linux commands check out this post: viewtopic.php?f=180&t=165908
QNAP support was extremely slow to respond but I found them very effective once they dug into the issue.
-
- New here
- Posts: 5
- Joined: Sat Aug 01, 2009 9:10 pm
Re: ISCSI error after last update 5.0.0.1986
unfortunately the scsidevadm list_device command gives me these errors:
If I found manuals with commands for managing iSCSI I would try to find a solution by myself ... i would try to reinstall the iscsi service first ..
Code: Select all
open ctl_device fail error 13
open ctl_device fail error 13
List device fail, res = 0x3020115, IOCTL fail
You do not have the required permissions to view the files attached to this post.
-
- Starting out
- Posts: 12
- Joined: Sat Apr 02, 2022 12:54 am
Re: ISCSI error after last update 5.0.0.1986
Did you ever get a resolution to this issue? I know have the same
-
- New here
- Posts: 7
- Joined: Sun May 09, 2010 10:21 pm
Re: ISCSI error after last update 5.0.0.1986
Hi,
I have the same error here.
Got the same output with the
scsidevadm list_device
command.
Difference: I have
- Model: TS-873AeU-RP
- OS: QTS hero
- Version: h5.0.0.2069
I contacted QNAP Support, hope they help soon. If they can resolve it, I will post the solution here. As the device is new, I was surprised and the problem occured out of a sudden after a reboot --> No backup currently, this was planned next week......
BR,
Georg
I have the same error here.
Got the same output with the
scsidevadm list_device
command.
Difference: I have
- Model: TS-873AeU-RP
- OS: QTS hero
- Version: h5.0.0.2069
I contacted QNAP Support, hope they help soon. If they can resolve it, I will post the solution here. As the device is new, I was surprised and the problem occured out of a sudden after a reboot --> No backup currently, this was planned next week......
BR,
Georg
-
- New here
- Posts: 7
- Joined: Sun May 09, 2010 10:21 pm
Re: ISCSI error after last update 5.0.0.1986
Updated to h5.0.0.2120 without success to fix the problem... anyone any ideas?
-
- New here
- Posts: 7
- Joined: Sun May 09, 2010 10:21 pm
Re: ISCSI error after last update 5.0.0.1986
Support resolved the problem after a long while.
I am sorry that I cannot post the solution here as it was not described to me even that I asked for it.
I am sorry that I cannot post the solution here as it was not described to me even that I asked for it.