Hello fellow Professionals!
I´m having a problem with an ISCSi on QNAP NAS TS-453A
>There are 2 Targets which are both online and connected
> One is showing that it ise not aktive
>Because of this Network mapping on it isn´t showing
Please see the attached foto below
Can anyone help me or suggest to me what i should do?
Thanks in advance
ISCSI LUN connected but not aktive
-
- First post
- Posts: 1
- Joined: Fri Aug 05, 2022 10:16 pm
ISCSI LUN connected but not aktive
You do not have the required permissions to view the files attached to this post.
- dolbyman
- Guru
- Posts: 35024
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: ISCSI LUN connected but not aktive
I have split your post into a new topic as it had nothing to do with port changed to ISCSI
Also make sure you post your screenshots in English and not German (switch UI language before you make these screenshots) .. or post here https://forum.qnapclub.de
Also make sure you post your screenshots in English and not German (switch UI language before you make these screenshots) .. or post here https://forum.qnapclub.de