I am the administrator for a fleet of TVS-471 NAS boxes; recently I have started upgrading the firmware on my fleet from version 4.3.3.0210 to 4.3.3.0262.
On each of the NASes that I have updated I am seeing the error below -
It seems that the NASes are reporting that the System Volume is full. How can this be remedied?
You already have a two week old thread open about volume full at viewtopic.php?f=25&t=134993. Please stick to that thread and do not open others.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5 Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
