iscsiadm get response from

iSCSI related applications
Post Reply
First post
Posts: 1
Joined: Sun May 16, 2021 2:12 am

iscsiadm get response from

Post by EvalSW » Sun May 16, 2021 3:21 am


I am setting up iscsi on Qnap 431XeU with this setting:
  • Adapter 1 (1GbE)
  • Adapter 2 (1GbE)

iSCSI Target List
  • just one target
    with iqn <iqn> and alias
  • connection only from dedicated initiator
  • no CHAP

On initiator (Oracle Linux)
- iscsiadm -m discovery -t sendtargets -p
- returns:,1 <iqn>,1 <iqn>

The question is, why qnap answers with the second line ?

I found out, that is an ip address from newly appeared interface "vethhole".

So the correct question is, why Adapter 2 reports vethole as iscsi target interface ?

Post Reply

Return to “iSCSI – Target & Virtual Disk”