TS-251 USB 3.0 Device not recognized

Printers, HDDs, USB/eSATA drives, 3rd-party programs
Zynic
New here
Posts: 4
Joined: Wed Aug 08, 2018 10:52 pm

TS-251 USB 3.0 Device not recognized

Postby Zynic » Wed Aug 08, 2018 11:10 pm

I run a TS-251 with 2 USB 3.0 ports (front/back). If I connect my external device ASMT 2115 via USB 3.0 cable (blue/back) it is not recognized. It only works on the USB 2.0 port. Do you have a clue?

dolbyman
Guru
Posts: 10161
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: TS-251 USB 3.0 Device not recognized

Postby dolbyman » Wed Aug 08, 2018 11:17 pm

just for everyone wondering:

ASMT 2115 seems to be a USB HDD controller , so it is probably an external drive enclosure you are connecting (you did not give this information)

Zynic
New here
Posts: 4
Joined: Wed Aug 08, 2018 10:52 pm

Re: TS-251 USB 3.0 Device not recognized

Postby Zynic » Thu Aug 09, 2018 1:29 pm

@ dolbyman, sorry for unprecise request. ASMT 2115 is build in a 3.5" HDD case with High Speed controller with Data Transfer up to 5 Gbps. installed is a Toshiba 2.0 TB 3.5" Disk Drive DT01ACA200

Zynic
New here
Posts: 4
Joined: Wed Aug 08, 2018 10:52 pm

Re: TS-251 USB 3.0 Device not recognized

Postby Zynic » Fri Aug 10, 2018 5:09 pm

Selfhealing? I have just switched the USB cable and now USB 3.0 has been recognized. Well, problem closed, but how? Connection?.... Thanks for reading.

Zynic
New here
Posts: 4
Joined: Wed Aug 08, 2018 10:52 pm

Re: TS-251 USB 3.0 Device not recognized

Postby Zynic » Tue Aug 21, 2018 4:13 pm

If TS-251 will be started after shutdown or sleep mode, the ASMT 2115 will not be connected, when it is itself in power on mode. After power off/on the ASMT 2115, the TS-251 connects right away.


Return to “Hardware & Software Compatibility”

Who is online

Users browsing this forum: No registered users and 2 guests