Hey guys!
After i moved to a new apartement i set up my NAS and now it wont boot. Before moving it worked fine.
When i press the power button, the display shows "booting system", the fans are on full rpm and NO beep. After about 7 seconds it turns itself off and tries to boot again after three seconds. Then it stucks on booting with fans on full rpm.
Same result with and without HDDs, without any beep.
My first thought was a broken DOM, because i had a similiar problem with an TS-469.
Could it be the DOM? Any other ideas?
Thank You!
TS-669 can´t boot
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
-
- Starting out
- Posts: 11
- Joined: Sun Jun 07, 2020 11:36 pm
Re: TS-669 can´t boot
Haha, yes, but even with the display failure it ran well. Now it wont boot at all. That there is no beep at all makes me curious.
- Toxic17
- Ask me anything
- Posts: 6478
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: TS-669 can´t boot
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
-
- Starting out
- Posts: 11
- Joined: Sun Jun 07, 2020 11:36 pm
Re: TS-669 can´t boot
No chance, but thanks for the laugh!
I already threw out the DOM and flashed it with balena etcher successfully. Still same issue, so i tried the USB flash drive method, same with that.
As i flashed the DOM via USB, the LED on the DOM flashed green, but built in the LED stayed dark. 5 Volt on the outer Pins.
HDMI has no signal.
-
- Starting out
- Posts: 11
- Joined: Sun Jun 07, 2020 11:36 pm
Re: TS-669 can´t boot
Hey guys!
a little update on the problem:
i got my hands on a TS 469 Pro and switched the DOM into my 669. Same problem.
So i tried switching the power supply, still the same.
Then i switched the RAM and... BOOM! ...but:
Display shows "ready for test ver 1.2.8" and Qfinder wants to initialize the NAS. Seems like it doesnt recognize the NAS as the old one, also the name showed in Qfinder is not the old one, but "TESTD2008B". Could it be because i flashed the DOM already?
I had mounted 5 HDDs with a lot of data on them. Is it possible to keep the data? I know on which HDD the system data is saved, does this help?
If i initialize the System all my setting are gone, right..?
a little update on the problem:
i got my hands on a TS 469 Pro and switched the DOM into my 669. Same problem.
So i tried switching the power supply, still the same.
Then i switched the RAM and... BOOM! ...but:
Display shows "ready for test ver 1.2.8" and Qfinder wants to initialize the NAS. Seems like it doesnt recognize the NAS as the old one, also the name showed in Qfinder is not the old one, but "TESTD2008B". Could it be because i flashed the DOM already?
I had mounted 5 HDDs with a lot of data on them. Is it possible to keep the data? I know on which HDD the system data is saved, does this help?
If i initialize the System all my setting are gone, right..?
-
- Starting out
- Posts: 11
- Joined: Sun Jun 07, 2020 11:36 pm
Re: TS-669 can´t boot
... sooooo, i guess all my data and settings are lost..?
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: TS-669 can´t boot
I would open a ticket with QNAP and see if they can recover your system. Flashing the DOM probably wiped your settings.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +