Hi,
we have an TS431P3 with 4x Toshiba MG08ACA16TE FW 0102 running in Raid-5.
When building the Array it runs without problems for days. As soon as we send data to the NAS (backups) 2 of 4 disks where hot-removed (disconnected).
We changed already the TS431P3 and all disk. The results wehre the same. when we reseat the disks, they will be reconnected and the array ist going to rebuild.
As soon als you send Data the same problem happens, with ohter sector errors and may be other disks.
It is driving us crazy
Has anybody ideas?
Thanks, greetings Harry
Warnung 2022-03-31 20:34:56 System 127.0.0.1 --- --- [Bad Block Log]: Invalid data found on Host: Disk 3 at sector (333732864, 64, 1).
Informationen 2022-03-31 20:35:19 System 127.0.0.1 Storage & Snapshots Volume [Storage & Snapshots] Finished hot-removing disk "Host: Disk 3".
Warnung 2022-03-31 20:35:22 System 127.0.0.1 Storage & Snapshots RAID Group [Storage & Snapshots] RAID group "1" is degraded. Storage pool: 1.
Fehler 2022-03-31 20:35:25 System 127.0.0.1 Hardware Status Drives [Hardware Status] "Host: Disk 3": Disconnected.
Informationen 2022-03-31 20:38:34 System 127.0.0.1 Storage & Snapshots Volume [Storage & Snapshots] Finished hot-removing disk "Host: Disk 4".
Fehler 2022-03-31 20:38:35 System 127.0.0.1 Storage & Snapshots RAID Group [Storage & Snapshots] RAID group "1" is inactive. Storage pool: 1.
Fehler 2022-03-31 20:39:39 System 127.0.0.1 Storage & Snapshots Disk [Storage & Snapshots] Failed to hot-remove disk "Host: Disk 4". Restart the NAS.
Fehler 2022-03-31 20:39:42 System 127.0.0.1 Hardware Status Drives [Hardware Status] "Host: Disk 4": Disconnected.
TS431P3 + 4x Toshiba MG08ACA16TE
-
- New here
- Posts: 2
- Joined: Sat Dec 31, 2022 8:45 pm
Re: TS431P3 + 4x Toshiba MG08ACA16TE
Hello,
I Have exactly the same problem, TS-832PXU with five MG08ACA16TE.
QNAP changed to new Hardware (RMA), same problem.
Also with an TS-832PX same problem.
Did you get a solution?
Sincerely
Roman
I Have exactly the same problem, TS-832PXU with five MG08ACA16TE.
QNAP changed to new Hardware (RMA), same problem.
Also with an TS-832PX same problem.
Did you get a solution?
Sincerely
Roman
- dolbyman
- Guru
- Posts: 35276
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS431P3 + 4x Toshiba MG08ACA16TE
best to open a ticket with QNAP
-
- First post
- Posts: 1
- Joined: Mon Jan 02, 2023 6:51 pm
Re: TS431P3 + 4x Toshiba MG08ACA16TE
Hi Roman,sporkrom@gmail.com wrote: ↑Sat Dec 31, 2022 8:53 pm Hello,
I Have exactly the same problem, TS-832PXU with five MG08ACA16TE.
QNAP changed to new Hardware (RMA), same problem.
Also with an TS-832PX same problem.
Did you get a solution?
Sincerely
Roman
Having the same issue here. Do you know which firmware version the HDD's operate under or did you check before?
Greetings,
Marko
-
- New here
- Posts: 2
- Joined: Sat Dec 31, 2022 8:45 pm
Re: TS431P3 + 4x Toshiba MG08ACA16TE
Hi,
QNAP ticket were opened, TS-832PXU was exchanged, newest firmeware on QNAP, same Problem.
The firmeware of the Toshiba drives is 0102. See attached label.
Sincerely
Roman
QNAP ticket were opened, TS-832PXU was exchanged, newest firmeware on QNAP, same Problem.
The firmeware of the Toshiba drives is 0102. See attached label.
Sincerely
Roman
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 2
- Joined: Mon May 02, 2022 8:39 pm
Re: TS431P3 + 4x Toshiba MG08ACA16TE
What we found out is, that there might be a problem with QNAP NAS that have an "Annapurna" CPU. We changed to QNAP with Intel CPU, it works fine now.
-
- First post
- Posts: 1
- Joined: Mon Nov 21, 2022 11:22 pm
Re: TS431P3 + 4x Toshiba MG08ACA16TE
hi All,
Increase the smartfan temperature and make sure those drives stay below 40 degrees celcius.
The QNAP smartfan isn't so smart after all we learned after having multiple (14!) HDD disconnects over a longer period.
Now that we increased fanspeed the drives stay cooler and no more disconnects. Keeping our fingers crossed.
TS-2483XU-RP
16 x MG08ACA16TE fw 0102
Increase the smartfan temperature and make sure those drives stay below 40 degrees celcius.
The QNAP smartfan isn't so smart after all we learned after having multiple (14!) HDD disconnects over a longer period.
Now that we increased fanspeed the drives stay cooler and no more disconnects. Keeping our fingers crossed.
TS-2483XU-RP
16 x MG08ACA16TE fw 0102